The in-radio Tailscale relay that AetherSDR installs from Waveforms → Install… → Remote Access (Tailscale) (RFC #6271; PR #6991). Setup guide: Tailscale Remote Access.
These are packages for the radio, not an AetherSDR release. AetherSDR downloads the one your radio takes, and refuses any other bytes.
| Radio | File | SHA-256 | Size |
|---|---|---|---|
| FLEX-6000 series (legacy waveform) | AetherTailnet-0.5.3-native.ssdr_waveform
| 14f00925b887e0c0cec0472d8b3dfcae6eb8229fd02307e7734c17dd02697192
| 9,192,923 bytes |
| FLEX-8000 series and Aurora (container) | flex-tailnet-shim-0.5.3.tar.gz
| 025ab56d1fbae7303608bfa96c9e87a305500360a877ff47dcdbac3c9aacadde
| 8,085,193 bytes |
Changes since 0.5.2:
- Less CPU per packet. Panadapter and audio data from the radio is written straight to the tailnet device, skipping the shim's internal network stack. On a FLEX-6000 that stack's UDP send was about a quarter of the shim's CPU (#6990).
- Link telemetry on demand. The shim measures the link at full rate only while AetherSDR is reading it, and every 30 s otherwise.
Both packages rebuild byte for byte from this tag with Go 1.27.1, CPython 3.14 and zlib 1.3.2. See tools/flex-tailnet-shim/README.md.