adafruit/circuitpython 9.1.2 on GitHub

This is CircuitPython 9.1.2, the latest bugfix revision of CircuitPython, and is a new stable release.

WARNING for nRF52 boards only: If your board has an nRF52 UF2 bootloader whose version is before 0.6.1, you will not be able to load CircuitPython 8.2.0 and later, due to increased size of the firmware. See these instructions for updating your bootloader.

Highlights of this release

Fix Adafruit FunHouse build, which was not working.
Correct pins for Adafruit Feather ESP32-C6.
Allow wider range of counts for Counter, FrequencyIn, and IncrementalEncoder.
Prevent crash or hang on nRF boards when stopping VM and BLE is not running.

Download from circuitpython.org

Firmware downloads are available from the downloads page on circuitpython.org. The site makes it easy to select the correct file and language for your board.

Installation

To install follow the instructions in the Welcome to CircuitPython! guide. To install the latest libraries, see this page in that guide.

Try the latest version of the Mu editor for creating and editing your CircuitPython programs and for easy access to the CircuitPython serial connection (the REPL).

Documentation

Documentation is available in readthedocs.io.

Port status

CircuitPython has a number of "ports" that are the core implementations for different microcontroller families. Stability varies on a per-port basis. As of this release, these ports are consider stable (but see Known Issues below):

atmel-samd: Microchip SAMD21, SAMx5x
cxd56: Sony Spresense
espressif: Espressif ESP32, ESP32-S2, ESP32-S3, ESP32-C2, ESP32-C3, ESP32-C6
nordic: Nordic nRF52840, nRF52833
raspberrypi: Raspberry Pi RP2040
stm: ST STM32F4 chip family

These ports are considered alpha and will have bugs and missing functionality:

broadcom: Raspberry Pi boards such as RPi 4, RPi Zero 2W
litex: fomu
mimxrt10xx: NXP i.MX RT10xxx
renode: hardware simulator
silabs: Silicon Labs MG24 family
stm: ST non-STM32F4 chip families

Changes since 9.1.1

Fixes and enhancements

Warn on use of non-standard sys.format_exception(). #9451, #9450. Thanks @jepler.

Port and board-specific changes

Broadcom

Espressif

Allow wider range of counts for Counter, FrequencyIn, and IncrementalEncoder, using PCNT overflow accumulator. #9461. Thanks @vickash.

i.MX

nordic

Prevent crash or hang on VM shutdown when BLE not running. #9453. Thanks @dhalbert.

renode

RP2040

SAMx

SiLabs

Spresense

STM

Individual boards

Adafruit Feather ESP32-C6: pin corrections. #9475. Thanks @dhalbert.
Adafruit FunHouse: fix hang when starting WiFi. #9545. Thanks @tannewt.
Bradán Lane STUDIO Explorer: support SSD1681 display. #9456. Thanks @bradanlane.

Documentation changes

Fix ReadTheDocs build. #9466. Thanks @jepler.

Build and infrastructure changes

Translation additions and improvements

New boards since 9.1.0

Known issues

See https://github.com/adafruit/circuitpython/issues for other issues, including issues still to be addressed for:

Thanks

Thank you to all who used, tested, and contributed since 9.1.1, including the contributors above, and many others on GitHub and Discord. Join us on the Discord chat to collaborate.

adafruit/circuitpython 9.1.2 CircuitPython 9.1.2 on GitHub