MeshMonitor v4.18.0
MeshMonitor 4.18.0 adds support for Meshtastic's new is_automation flag. Every packet MeshMonitor sends for an automation now sets bit 2 of Data.bitfield, and MeshMonitor reads the flag from every other client. Flagged messages show a bot icon, and Packet Monitor shows the flag in its own column. Auto-Ack and Auto-Responder ignore automated messages by default, so two bots can't answer each other forever. Automation Engine message rules gain a Sent by filter, and new rules start at "People only". The release also adds public-instance mode, an embedded MeshCore MQTT broker source, Meshtastic sends over MQTT with no radio, mesh-wide notification defaults, Direct RF Contacts history, verified remote config saves, a security digest Preview, and owner/email claims for the Analyzer Observer. Fixes cover MeshCore telemetry, maps and repeater names, the Virtual Node, the MT↔MC bridge, MQTT config saves and server-side PKI DM decryption. Upgrading runs migrations 233 to 239 automatically. Read the upgrade notes below before you update.
📰 Read the blog post: Bots Now Say They Are Bots
Upgrade notes
- Migrations 233 to 239 run on start on SQLite, PostgreSQL and MySQL.
- Auto-Ack and Auto-Responder skip automated messages by default. A message flagged
is_automationgets no reply unless you tick Respond to automated messages. A MeshMonitor bot that answered another bot will stop. - Automation sends set the
is_automationbit. There is no setting to turn it off. - New Automation Engine message rules default to People only. Existing rules are unchanged.
- MeshCore Companion heartbeat: existing Companion sources with no stored heartbeat get 60 seconds. That includes sources where you turned it off under the old form, which stored nothing for off. Set it to 0 to turn it off again.
- Notifications: push subscriptions collapse to one per browser. Per-source settings keep working until you edit them. Push rows with no user, and the anonymous account, get every source the anonymous account can read. Apprise and desktop alerts arrive up to 5 seconds later.
- Public-instance mode, hide-declined-MQTT nodes, MQTT sends with no radio and broker forwarding are all off by default. With public-instance mode on, the CoT/TAK feed is not trimmed; Settings warns about it.
- The MeshCore MQTT broker listens on 1884 by default. Docker and Helm do not expose it; map the port yourself.
- MQTT config saves wait up to 5 seconds for a refusal. A refused MQTT restore now fails instead of passing.
- Exchange Position no longer sends your position to the far node.
- Room Sync: rooms with auto-sync on that this radio logged in to before get one blank-password login after each connect, at most one per source per minute, skipped when a login ran in the last hour.
What's changed
Features
- feat(meshcore): owner/email claims in the Analyzer Observer token (#6454) (#6458)
- feat(security): preview the security digest before sending (#6453) (#6456)
- feat: support Meshtastic is_automation bit (#6449) (#6450)
- feat(privacy): public-instance mode phase 3 — UI for redacted views, docs (#5156) (#6435)
- feat(privacy): public-instance mode, phase 1: settings, redactor, middleware (#5156) (#6433)
- feat(admin): verified remote config saves that read the setting back (#4487) (#6417)
- feat(meshcore): re-join Room Sync rooms with a blank-password ACL login (#6408) (#6415)
- feat(auto-responder): per-trigger enable/disable for Meshtastic (#6405) (#6413)
- feat(meshcore): pass HOPS/ROUTE/ROUTE_NAMES/HASH_SIZE/SCOPE to Auto-Responder scripts (#6402) (#6412)
- feat(meshcore): embedded MeshCore MQTT broker source with upstream forwarding (#6197) (#6400)
- feat(mqtt): send Meshtastic messages over MQTT with no radio (#4305); fix PKI nonce layout (#6395)
- feat(notifications): mesh-wide defaults, per-source overrides, cross-source dedup (#5729) (#6394)
- feat(privacy): hide no-MQTT-consent nodes from anonymous viewers (#5156) (#6393)
- feat(meshtastic): warn on LoRa transparent mode; show nRF52 bootloader version (#6181, #6321) (#6392)
- feat: Direct RF Contacts history for Meshtastic and MeshCore (#6210) (#6388)
- feat(map): show gateway names in gateway legend and popup chips (#6386) (#6387)
Bug Fixes
- fix(websocket): send isAutomation, xeddsaSigned and viaMqtt on live messages (#6449) (#6455)
- fix(meshcore): raise source-connected/disconnected events for MeshCore sources (#6437) (#6446)
- fix(config): report when the node refuses an MQTT config save (#6439) (#6448)
- fix(embed): honor public-instance mode in embed maps (#5156) (#6445)
- fix(settings): lay out checkbox settings inline (#6444)
- fix(meshcore-vn): show MeshMonitor's own channel sends as 0 hops, not "63 hops, 4-byte" (#6441) (#6443)
- fix(frontend): don't touch Buffer when the constants module loads in the browser (#6447)
- fix(virtual-node): stop blocking waypoints from virtual node clients (#6442)
- fix(virtual-node): relay text messages from one client to the other connected clients (#6436) (#6438)
- fix(meshcore): parse the repeater 'get name' replies the console actually sends (#6431)
- fix(virtual-node): forward the radio's NodeDB flags so Android 2.8 shows the right lock and no "unheard" badge (#5921) (#6416)
- fix(automation): MT↔MC bridge relays the operator's own MeshCore channel posts (#6409) (#6410)
- fix(meshcore): show the stock "hello" guest password on room logins (#6407) (#6414)
- fix(meshcore): send PATCH from the Remote Telemetry and Time Sync automation sections (#6399) (#6411)
- fix(meshcore): pair neighbour directions by freshness on the maps (#6403) (#6404)
- fix(automation): MeshCore telemetry triggers carry node name, key and role (#6397) (#6398)
- fix(neighbors): scope neighbor-info by source before picking the latest per pair (#6396)
- fix(meshtastic): send position requests with an empty Position (#6047) (#6391)
- fix(meshcore): decode Cayenne-LPP telemetry locally so altitude no longer truncates sensors (#6390)
Refactoring
- refactor: use PortNum constants for port numbers and ban bare ones in lint (#6440)
Docs
- docs: 4.18.0 changelog, is_automation blog post and feature docs (#6459)
- docs: update CardMesh links after its GitHub rename to maxhayim/CardMesh (#6419)
Tests
- test(privacy): public-instance mode phase 2 — sentinel audit of every anonymous route (#5156) (#6434)
- test(geocoder): scale the reverse-geocode timing budget under coverage (#6385)
Dependencies
- build(deps): bump rotating-file-stream from 3.2.10 to 4.0.0 (#6423)
- build(deps): bump web-push from 3.6.7 to 4.0.0 (#6424)
- build(deps): bump maplibre-gl from 6.16.0 to 6.18.0 (#6426)
- build(deps): bump @rollup/rollup-linux-arm64-musl from 4.66.0 to 4.68.2 (#6428)
- build(deps): bump satellite.js from 7.1.0 to 7.2.0 (#6429)
- build(deps): bump azure/setup-helm from 5.0.1 to 5.1.0 (#6420)
- build(deps-dev): bump @vitejs/plugin-react from 6.1.2 to 6.3.0 (#6427)
- build(deps-dev): bump globals from 17.13.0 to 17.14.0 (#6425)
- build(deps-dev): bump puppeteer from 25.16.0 to 25.17.0 (#6430)
- build(deps): bump the production-dependencies group with 6 updates (#6422)
- build(deps-dev): bump @testing-library/user-event (#6421)
Translations
Chore
- chore: bump version to 4.18.0 (#6406)
Issues resolved
- #4305 [FEAT] MQTT-native ("nodeless") outbound send path, like pdxlocations/connect
- #4487 [FEAT] Auto-retry admin commands until verified successful
- #5156 Anonymous-read privacy: honor okay_to_mqtt=false for MQTT-ingested nodes; public-instance mode
- #5729 [FEAT] Unified mesh-scoped notifications with cross-source dedup
- #5921 [BUG] Virtual Node: wrong encryption icon and broken link status for Android client vs direct connection
- #6047 [BUG] Position Exchange goes unanswered when the request carries the sender's coordinates (works with empty position)
- #6181 [2.8 tracking] Firmware #12283: LoRaConfig.transparent_mode (dumb LoRa modem) — detect and warn
- #6197 [FEAT] Embedded MeshCore MQTT broker (internal observer/analyzer endpoint)
- #6210 [FEAT] Direct RF Contacts history: nodes heard at 0 hops over RF, per time window + node detail
- #6321 Track firmware protobuf additions: DeviceMetadata.bootloader_version and FieldMetadata.sensitive
- #6386 Feature: Display Gateway Name/Label instead of raw Gateway ID in Map Popups and Legend
- #6397 [BUG] Automation Engine telemety triggers don't have node identifying info (Meshcore)
- #6399 [BUG] MeshCore Remote Telemetry automation section sends POST but route is PATCH (Failed to update telemetry)
- #6402 [FEAT] MeshCore Auto-Responder scripts: expose HASH_SIZE/HOPS/ROUTE/SCOPE as env vars
- #6403 [BUG] MeshCore: map neighbor link shows a random direction and ignores neighbour age (link SNR flips between stale and current value)
- #6405 [FEAT] Per-trigger Enable/Disable for Meshtastic Auto-Responder (parity with MeshCore)
- #6407 [BUG] MeshCore room login says blank = guest, but stock room servers default to guest password "hello"
- #6408 [FEAT] MeshCore rooms: re-join on restart via blank-password ACL login (no stored password needed)
- #6409 [BUG] 4.17.3 - MT - MC bridge does not pass own Meshcore node messages
- #6436 [SUPPORT] Message relaying between apps connected to virtual nodes
- #6437 [BUG] MeshCore: automation system events source-connected/source-disconnected never fire
- #6439 [BUG] Can't activate MQTT
- #6441 [BUG] MeshCore Virtual Node shows messages sent from MeshMonitor as "63 hops, 4-byte" in the app
- #6449 [FEAT]
is_automationsupport - #6453 [BUG] Can't send apprise security diget to discord
- #6454 [FEAT] Analyzer Observer: optional
owner/emailtoken claims to link the observer to a LetsMesh / MeshMapper account
New contributors
Full changelog: v4.17.3...v4.18.0
🚀 MeshMonitor v4.18.0
📦 Installation
Docker (recommended):
docker run -d \
--name meshmonitor \
-p 8080:3001 \
-v meshmonitor-data:/data \
ghcr.io/Yeraze/meshmonitor:4.18.0🧪 Testing
✅ All tests passed
✅ TypeScript checks passed
✅ Docker images built for linux/amd64, linux/arm64, linux/arm/v7
📋 Changes
See commit history for detailed changes.