github VivaLaVent/ps5-bazzite-deck v3.0

pre-release43 minutes ago

What's new

Everything since v2.13, the last Stable.

Fixed

  • A GPU hang no longer freezes the display. The game may still close. From the official PS5 kernel.
  • Game Mode starts again after a crash. When gamescope crashed and Steam hung, the screen stayed on a text console until a forced shutdown.
  • The console's Bluetooth no longer shuts down after a burst of USB activity until a restart. From the official PS5 kernel.
  • Original PS5 Wi-Fi: the console no longer freezes when the Wi-Fi chip stops answering (two places in the driver could wait forever; the second was found by PS5-CachyOS), and Wi-Fi no longer follows the access point's country (your own network went missing).
  • 1440p at 100 and 120 Hz was shifted up on the FLAVA3 HDMI chip.
  • PS5 Pro: the GPU slows down at 85 °C instead of 80 °C, which matched the fan's target and held the GPU back.
  • Bazzite's performance profile starts the LAVD scheduler: the kernel is built with pahole 1.31.
  • Emergency mode gives a shell instead of "the root account is locked".
  • A quiet start: kernel messages no longer fill the screen at boot or when Game Mode closes.

New

  • Native resolution at the first start (4K, 1440p or 1080p, at 60 Hz) instead of 1080p60. A resolution you chose stays. If the screen stays dark: amdgpu.force_1080p=1 in cmdline.txt on the boot partition.
  • Drivers for controllers, wheels and streaming: the Xbox Wireless Adapter, Xbox controllers over Bluetooth, Logitech, Thrustmaster and Fanatec wheels with force feedback, the GameCube adapter, the OBS virtual camera and Razer devices.
  • One DualSense pairing for the PS5 and Linux on the original PS5 and Slim: pair in the PS5 OS; Linux imports it at every start. The Pro keeps its own Linux address, because the shared pairing doesn't connect there yet.
  • PS5 Pro: 60 compute units on system software 13.00, with this release's loader.
  • Linux 7.3.5 (was 7.3.3), with the stable updates' Bluetooth and USB fixes.
  • Graphics driver from Mesa 26.2.7, as Bazzite, on the PS5 Pro and for 32-bit programs. On the original PS5 and Slim, DirectMesh (below) is the driver; it is built on Mesa 26.2.1.
  • Steam's Wi-Fi power setting is respected: Wi-Fi power saving stays off by default, but the setting is no longer forced back every two minutes.
  • The Linux-only Bluetooth address is for the PS5 Pro only. If you switched it on, on an original PS5 or a Slim: it's gone; pair the controller in the PS5 OS, Linux shares that pairing.
  • Legacy installs (from before v2.5) are no longer supported: flash a new install, or use the converter from v2.16.2.

On by default, with an off switch

  • Mesh shaders on the original PS5 and Slim. DirectMesh, the driver with Mesh shaders, is the Vulkan driver of the whole session: Game Mode, Steam and games. Off: ps5-directmesh off, then restart. One game on the standard driver: ps5-directmesh --system %command% as its launch option. DirectMesh keeps the compute queue open, so AMD_PS5_COMPUTE_QUEUE=0 only works together with --system. Flatpak apps keep their own driver.
  • VERDE consoles: HDR and 4K at 100/120 Hz. HDR goes out as 12-bit YCbCr 4:2:2, 4K at 120 Hz over HDMI 2.1 FRL. If colours are wrong: sudo rpm-ostree kargs --append=hdmi.verde_infoframes=0 --append=hdmi.verde_deep_colour=0 --append=hdmi.verde_frl=0, then start with the loader. If the console doesn't start: on a PC, add hdmi.verde_infoframes=0 hdmi.verde_deep_colour=0 hdmi.verde_frl=0 to the end of the line in cmdline.txt on the drive's boot partition.
  • PS5 Pro: CPU boost to 3.5 GHz. It adds heat. Off: ps5-perf pro-boost off.

Option

  • A game that drops out of Game Mode with Failed to pin framebuffer: Game Mode → Settings → System → Enable Developer Mode, then Developer → Force Composite. Rift Apart starts with it.

bootc

New install

A USB drive or SSD of 64 GB or more; flashing erases it.

  1. Extract ps5-bazzite-deck-bootc-v3.0.img.7z.001 with 7-Zip. The first line of ps5-bazzite-deck-bootc-v3.0.img.sha256 is the image's SHA-256.
  2. Flash the .img with balenaEtcher, not Rufus. If Windows offers to format the drive, choose Cancel.
  3. Start it with bazzite-bootc-loader-v3.0.elf. The first start takes a few minutes.

Switching from Legacy

Flash a new install, or convert in place with the converter from v2.16.2, keeping users, games and Flatpaks: wiki.

Updating

sudo bootc upgrade, or Steam's update button. It applies at the next start with the loader. Use bazzite-bootc-loader-v3.0.elf from this release: a PS5 Pro on system software 13.00 needs it for its GPU.

Stable follows the release marked Latest, Beta the newest pre-release: sudo bootc switch ghcr.io/vivalavent/ps5-bazzite-bootc:beta (or :stable), or Steam → Settings → System → OS Update Channel.

Problems

  • sudo bootc rollback, then restart with the loader.
  • It doesn't start at all: follow ROLLBACK.txt on the drive's boot partition.
  • Report it on Discord with the file ps5-report saves.

Known issues

  • PS5 Pro: a DualSense paired in the PS5 OS doesn't connect in Linux (#73); the Pro keeps its own Linux Bluetooth address, pair once in Game Mode.
  • DualSense over Bluetooth, late or ghost inputs in a Proton game: Bazzite Portal → Troubleshoot → switch InputPlumber off.
  • Some games drop out of Game Mode with Failed to pin framebuffer when VRAM is full: Rift Apart runs with Steam's Force Composite (see Option in What's new); Returnal, Avowed and Spider-Man: Miles Morales still need Desktop Mode.
  • VERDE HDMI chip: no VRR yet.
  • The clock is wrong for the first minute after a start, until network time arrives.
  • Starting without the USB drive is experimental: wiki.
  • M.2 installs from v2.11 or older can stop in an emergency shell after an update: fix.
  • A drive flashed before v2.11 doesn't start on PS5 system software 4.x: fix.

What to test

  • After a game crashes in Game Mode: does Game Mode come back by itself?
  • VRR and HDR together (FLAVA3): still as before? Linux 7.3.5 changed how the VRR packet is marked in HDR.
  • Original PS5: does a DualSense paired in the PS5 OS connect in Linux without pairing?
  • VERDE consoles: does the console start every time, does HDR switch on, does 4K at 120 Hz come up? The TV model helps.
  • Original PS5 and Slim: do your games run as before on DirectMesh? If one doesn't, try it with ps5-directmesh --system %command% and report both. Does a 32-bit game still start (they keep the standard driver)?
  • Wi-Fi drops: power saving is no longer forced off every two minutes, as in Bazzite itself. At the moment of a drop, in Game Mode: iw dev wlp64s0f7 get power_save.
  • PS5 Pro: the SoC temperature on the Fan line of ps5-report after 15 minutes of a game, with the boost on.

Sharing logs

bash <(curl -fsSL https://raw.githubusercontent.com/VivaLaVent/ps5-bazzite-deck/main/tools/ps5-report.sh)

Paste its SUMMARY line in reports, and attach the saved file to bug reports.

Files

  • bazzite-bootc-loader-v3.0.elf – the PS5 Linux loader for this release: soniciso1's ps5-linux-loader, which also hands Linux the PS5 Pro GPU firmware, the Wi-Fi firmware and the console's Bluetooth pairings
  • bazzite-bootc-loader-v3.0.elf.sha256 – loader checksum
  • bazzite-bootc-loader-v3.0.elf.inputs

Found a problem? Run ps5-report on the PS5 and post the file it saves in Discord.
Like the project? Support it on Ko-fi.

Don't miss a new ps5-bazzite-deck release

NewReleases is sending notifications on new releases.