github VivaLaVent/ps5-bazzite-deck v2.16.2

pre-releaseone hour ago

What's new

Pre-release on top of v2.16.1.

  • Original PS5: one DualSense pairing for the PS5 and Linux again. v2.16.1 switched it off on every console but the Slim; your reports show it works on the original PS5. Only the Pro keeps its own Linux address, because the shared pairing doesn't connect there (#73). To choose yourself: ps5-bt-address on or off, then restart.
  • PS5 Pro: CPU boost to 3.5 GHz as an option: ps5-perf pro-boost on (off again with off). It is the console's own boost, confirmed by two Pro owners. Off by default because it adds heat.
  • InputPlumber is off. This service for handhelds replayed DualSense inputs late in Proton games over Bluetooth (ghost inputs; found by Sween Wolf). Bazzite Portal → Troubleshoot switches it back on.
  • The console's Bluetooth no longer shuts down after a burst of USB activity, and Salina poller: lock busy, rescheduling no longer floods the screen. The driver for the console's own USB controller, which Bluetooth is on, gave up after 32 events in one pass and stayed dead until a restart. From the official PS5 kernel.
  • The graphics driver follows Bazzite to Mesa 26.2.7.
  • ps5-report no longer hangs while an update is downloading, and shows whether Wi-Fi is switched off.

bootc

New install

A USB drive or SSD of 64 GB or more; flashing erases it.

  1. Extract ps5-bazzite-deck-bootc-v2.16.2.img.7z.001 with 7-Zip. The first line of ps5-bazzite-deck-bootc-v2.16.2.img.sha256 is the image's SHA-256.
  2. Flash the .img with balenaEtcher, not Rufus. If Windows offers to format the drive, choose Cancel.
  3. Start it with bazzite-bootc-loader-v2.16.2.elf. The first start takes a few minutes.

Switching from Legacy

In place, keeping users, games and Flatpaks: wiki. Or flash a new install.

Updating

This pre-release is on the Beta channel: sudo bootc switch ghcr.io/vivalavent/ps5-bazzite-bootc:beta, or sudo bootc upgrade if you are on Beta already. Then start with the loader. A PS5 Pro on 13.00 needs the loader from v2.16 or newer.

Back to Stable: the same bootc switch with :stable, or Steam → Settings → System → OS Update Channel.

Problems

  • sudo bootc rollback, then restart with the loader.
  • It doesn't start at all: follow ROLLBACK.txt on the drive's boot partition.
  • Report it on Discord with the file ps5-report saves.

Known issues

  • Bazzite's performance profile can't start the LAVD scheduler: our kernel is built with pahole 1.30. The rest of the profile works.
  • Games dropping out of Game Mode with Failed to pin framebuffer: VRAM is full. See What to test; 6 GB VRAM (the default) or 5 GB is the safe setting.
  • The clock is wrong for the first minute after a start, until network time arrives.
  • Starting without the USB drive is experimental: wiki.
  • PS5 Pro: the CPU stays at 3.2 GHz.
  • VERDE HDMI chip: no HDR.
  • M.2 installs from v2.11 or older can stop in an emergency shell after an update: fix.
  • A drive flashed before v2.11 doesn't start on PS5 system software 4.x: fix.

What to test

  • Original PS5: after updating, pair the DualSense in the PS5 OS (or keep its PS5 pairing) and start Linux with the loader: does it connect without pairing? If you paired it in Linux on v2.16.1, remove that pairing in the Bluetooth settings first.
  • PS5 Pro: ps5-perf pro-boost on, then a game for 15 minutes. ps5-report afterwards: the SoC temperature on the Fan line, and whether the GPU section shows limiting the clock.
  • After a game crashes in Game Mode: does Game Mode come back by itself, and does the controller still work? sudo dmesg | grep -iE "salina|xhci.*(died|dying)" should stay empty.
  • A game that works in Desktop Mode but drops out of Game Mode with Failed to pin framebuffer: Game Mode → Settings → System → Enable Developer Mode, then Developer → Force Composite. Rift Apart starts with it; Returnal, Avowed and Spider-Man: Miles Morales don't yet.

Sharing logs

bash <(curl -fsSL https://raw.githubusercontent.com/VivaLaVent/ps5-bazzite-deck/main/tools/ps5-report.sh)

Paste its SUMMARY line in reports, and attach the saved file to bug reports.

Files

  • ps5-bazzite-deck-bootc-v2.16.2.img.7z.* – bootc disk image, 7-Zip multi-volume (extract from .001)
  • ps5-bazzite-deck-bootc-v2.16.2.img.sha256 – checksums for the bootc image and its volumes
  • linux-ps5-7.3.3-1.x86_64.rpm – PS5 Linux kernel RPM (used by the bootc image build)

Found a problem? Run ps5-report on the PS5 and post the file it saves in Discord.
Like the project? Support it on Ko-fi.

Don't miss a new ps5-bazzite-deck release

NewReleases is sending notifications on new releases.