github VivaLaVent/ps5-bazzite-deck v2.14

latest releases: v2.16, v2.15
pre-release3 days ago

What's new

A pre-release on top of v2.13, the stable version. Please report what you see, with the SUMMARY line of ps5-report.

  • Mesh shaders on the original PS5 and Slim, per game (experimental). Some D3D12 games need Mesh shaders ("DirectX 12 Ultimate") and don't start without them on these consoles. This release adds DirectMesh by lonewolf0622, written for the AMD BC-250, whose GPU is the same family as the PS5's. It comes as a second graphics driver that only the games you choose use: in Steam, the game's Properties → Launch Options, ps5-directmesh %command%. Every other game, the desktop and Game Mode keep the normal driver. On a PS5 Pro it changes nothing.
  • DirectMesh has been tested on BC-250 hardware by its author, not yet on a PS5. If a game hangs with it, remove the launch option and the game is back on the normal driver. Reports either way are what this pre-release is for.

Everything else is as in v2.13: same kernel, same loader, same system.

bootc

New install

You need a USB drive or SSD of 64 GB or more. Flashing erases it.

  1. Extract ps5-bazzite-deck-bootc-v2.14.img.7z.001 with 7-Zip (not Windows' built-in extraction). The first line of ps5-bazzite-deck-bootc-v2.14.img.sha256 is the .img's checksum; on Windows, certutil -hashfile ps5-bazzite-deck-bootc-v2.14.img SHA256 shows yours.
  2. Flash the .img with balenaEtcher (drives flashed with Rufus stopped in an emergency shell for several users; balenaEtcher fixed it). When Windows offers to format the drive afterwards, choose Cancel. On Linux with sudo dd if=ps5-bazzite-deck-bootc-v2.14.img of=/dev/sdX bs=4M status=progress conv=fsync (replace /dev/sdX with your drive).
  3. Start it with bazzite-bootc-loader-v2.14.elf.

The first start takes a few minutes. A PS5 Pro has its 60 compute units from the first start.

Switching from Legacy

In place, keeping users, games and Flatpaks. On the Legacy install, in a terminal or over SSH, with at least 30 GB free on the system drive:

curl -fsSLO https://raw.githubusercontent.com/VivaLaVent/ps5-bazzite-deck/main/tools/legacy-to-bootc.sh
sudo bash legacy-to-bootc.sh            # checks only, changes nothing
sudo bash legacy-to-bootc.sh --apply    # downloads the Stable image (about 7 GB) and sets it up beside Legacy

Then power off and start with bazzite-bootc-loader-v2.14.elf. The first start moves your home folders and Flatpaks over.

  • Nothing of the Legacy system is deleted until you run sudo bash legacy-to-bootc.sh --cleanup on the working bootc system, which frees about 20 GB.
  • If bootc doesn't start: on a PC, copy bzImage, initrd.img and cmdline.txt from legacy-backup/ on the drive's boot partition back to its top folder. Legacy starts again as before.
  • Not carried over: Decky Loader and packages installed into the system; install them again. Options you added to cmdline.txt are kept.
  • This script is new. A backup of anything you can't replace is a good idea before --apply.

Or flash: follow New install on a second drive, or on the same one after copying off what you want to keep.

Updating

This is a pre-release, on the Beta channel. On the PS5, in a terminal (Desktop Mode → Konsole) or over SSH (password ps5):

sudo bootc switch ghcr.io/vivalavent/ps5-bazzite-bootc:beta

Already on Beta: sudo bootc upgrade. It applies at the next start with the loader. bazzite-bootc-loader-v2.14.elf is the same loader as v2.13's; either works. Installed packages with rpm-ostree install? Use sudo rpm-ostree upgrade instead of sudo bootc upgrade.

Back to the stable release: the same bootc switch command with :stable instead of :beta. Steam's Settings → System → OS Update Channel does the same.

Problems

  • sudo bootc rollback, then power off or restart, and start with the loader.
  • If a new version doesn't start at all: ROLLBACK.txt on the drive's boot partition explains how to start the previous one from a PC. That needs bazzite-bootc-loader.
  • Report it in Discord with the file ps5-report saves.

Known issues

  • M.2 install in the emergency shell after an update (Couldn't find specified OSTree root '/sysroot//ostree/boot.1/…'), on v2.11 or older: the boot partition names the right version under the wrong counter. Either way gets you back in, and nothing on the M.2 is lost:
  • An already flashed drive on PS5 system software 4.x (any image before v2.11): fix it from a PC instead of flashing again. It changes one field, not your data, and only shows what it would do without --apply:
  • No HDR on consoles with the VERDE HDMI chip (ps5-report names the chip on its first lines). The chip's HDR setup is unknown to every PS5 Linux kernel, from v1.8.9 on, so HDR is no longer offered there instead of coming out washed out.
  • PS5 Hardware Control's Restore on boot (up to its version 1.5.0) loads your saved curve but leaves the console's fan control on until you apply a curve or preset; a fix is with its developer. Until then, ps5_fan.curve=1 in cmdline.txt starts on the curve, and Restore on boot works.
  • The first start after updating from v2.5.1 or older still uses the old VRAM size; the 6 GB applies from the next start with the loader. With the old 512 MB, Game Mode can show a garbled block in the top-left corner. Power off and start with the loader once more.
  • A game that fills the whole VRAM can leave the display without room for its picture (Failed to pin framebuffer: -ENOMEM in the kernel log), reported with Ratchet & Clank: Rift Apart; under investigation. 4 GB in vram.txt (0x100000000) worked for that game on v2.5.1.

What to test

  • DirectMesh, on an original PS5 or Slim: in a terminal, ps5-directmesh vulkaninfo | grep -i mesh_shader lists VK_EXT_mesh_shader. Then a game that needs Mesh shaders, with ps5-directmesh %command%: does it start, how does it run? If it hangs, please post sudo dmesg | grep -iE "amdgpu|ring|timeout" | tail -20 from the next start.
  • Without the launch option nothing should change: the same games run as on v2.13.
  • Still wanted from v2.13: a PS5 Pro showing compute units: 60 after the first start, starts from /data/PS5/Linux, and the in-place switch from Legacy.

Sharing logs

bash <(curl -fsSL https://raw.githubusercontent.com/VivaLaVent/ps5-bazzite-deck/main/tools/ps5-report.sh)

Paste its SUMMARY line when you report results, and attach the saved file for a bug report.

Files

  • ps5-bazzite-deck-bootc-v2.14.img.7z.* – bootc disk image, 7-Zip multi-volume (extract from .001)
  • ps5-bazzite-deck-bootc-v2.14.img.sha256 – checksums for the bootc image and its volumes
  • bazzite-bootc-loader-v2.14.elf – the PS5 Linux loader for this release: soniciso1's ps5-linux-loader, which also hands Linux the PS5 Pro GPU firmware, the Wi-Fi firmware and the console's Bluetooth pairings
  • bazzite-bootc-loader-v2.14.elf.sha256 – loader checksum
  • linux-ps5-7.3.3-1.x86_64.rpm – PS5 Linux kernel RPM (used by the bootc image build)

Found a problem? Run ps5-report on the PS5 and post the file it saves in Discord.
Like the project? Support it on Ko-fi.

Don't miss a new ps5-bazzite-deck release

NewReleases is sending notifications on new releases.