github VivaLaVent/ps5-bazzite-deck v2.12.1

latest releases: v2.16, v2.15, v2.14...
pre-release4 days ago

What's new

A pre-release on top of v2.12. Please report what you see, with the SUMMARY line of ps5-report.

  • 4K120 no longer disappears after switching between Game Mode and Desktop (original PS5 and Slim with the FLAVA3 HDMI chip). When the HDMI 2.1 link doesn't come up, the system stops offering 4K120 so you don't end on a black screen; that stays as it is. But the check behind it could keep watching a link that a mode change had already taken down, and then withdrew 4K120 until the next restart. It now stops when a mode change begins.

Everything from v2.12 is in: M.2 installs starting after an update, and the About page showing the variant, channel and release.

bootc

New install

You need a USB drive or SSD of 64 GB or more. Flashing erases it. Coming from a Legacy install, which is no longer supported: the v2.13 notes have the in-place switch.

  1. Extract ps5-bazzite-deck-bootc-v2.12.1.img.7z.001 with 7-Zip (not Windows' built-in extraction). The first line of ps5-bazzite-deck-bootc-v2.12.1.img.sha256 is the .img's checksum; on Windows, certutil -hashfile ps5-bazzite-deck-bootc-v2.12.1.img SHA256 shows yours.
  2. Flash the .img with balenaEtcher (drives flashed with Rufus stopped in an emergency shell for several users; balenaEtcher fixed it). When Windows offers to format the drive afterwards, choose Cancel. On Linux with sudo dd if=ps5-bazzite-deck-bootc-v2.12.1.img of=/dev/sdX bs=4M status=progress conv=fsync (replace /dev/sdX with your drive).
  3. Start it with bazzite-bootc-loader-v2.12.1.elf.

The first start takes a few minutes. A PS5 Pro reaches 60 compute units from the second start, once the loader has dumped its GPU firmware.

Updating

This is a pre-release, on the Beta channel. On the PS5, in a terminal (Desktop Mode → Konsole) or over SSH (password ps5).

On v2.6.2 or older, or installed from one of their disk images: run this once first. It prints ready to update, and without it the update fails with "Failed to start ostree-finalize-staged.service":

sudo rm -f /etc/systemd/system/greenboot-set-rollback-trigger.service
printf '[Unit]\nDescription=No greenboot rollbacks on the PS5\n\n[Service]\nType=oneshot\nExecStart=/usr/bin/true\nRemainAfterExit=yes\n' | sudo tee /etc/systemd/system/greenboot-set-rollback-trigger.service >/dev/null
sudo systemctl daemon-reload && sudo systemctl start ostree-finalize-staged.service && echo "ready to update"

Then switch to Beta, which gets this release:

sudo bootc switch ghcr.io/vivalavent/ps5-bazzite-bootc:beta

Already on Beta: sudo bootc upgrade. It applies at the next start with the loader; on a PS5 Pro, start with the loader once more for its GPU firmware. Installed packages with rpm-ostree install? Use sudo rpm-ostree upgrade instead of sudo bootc upgrade.

Back to the stable release: the same bootc switch command with :stable instead of :beta. Steam's Settings → System → OS Update Channel does the same.

Problems

  • sudo bootc rollback, then power off or restart, and start with the loader.
  • If a new version doesn't start at all: ROLLBACK.txt on the drive's boot partition explains how to start the previous one from a PC. That needs bazzite-bootc-loader.
  • Report it in Discord with the file ps5-report saves.

Known issues

  • M.2 install in the emergency shell after an update (Couldn't find specified OSTree root '/sysroot//ostree/boot.1/…'), on v2.11 or older: the boot partition names the right version under the wrong counter. Either way gets you back in, and nothing on the M.2 is lost:
  • An already flashed drive on PS5 system software 4.x (any image before v2.11): fix it from a PC instead of flashing again. It changes one field, not your data, and only shows what it would do without --apply:
  • No HDR on consoles with the VERDE HDMI chip (ps5-report names the chip on its first lines). The chip's HDR setup is unknown to every PS5 Linux kernel, from v1.8.9 on, so HDR is no longer offered there instead of coming out washed out.
  • The pairing import doesn't work when the boot files are on the console's own storage (ps5-m2-install --boot): the loader writes the pairings there, where Linux can't read them.
  • PS5 Hardware Control's Restore on boot (up to its version 1.5.0) loads your saved curve but leaves the console's fan control on until you apply a curve or preset; a fix is with its developer. Until then, ps5_fan.curve=1 in cmdline.txt starts on the curve, and Restore on boot works.
  • The first start after updating from v2.5.1 or older still uses the old VRAM size; the 6 GB applies from the next start with the loader. With the old 512 MB, Game Mode can show a garbled block in the top-left corner. Power off and start with the loader once more.
  • A game that fills the whole VRAM can leave the display without room for its picture (Failed to pin framebuffer: -ENOMEM in the kernel log), reported with Ratchet & Clank: Rift Apart; under investigation. 4 GB in vram.txt (0x100000000) worked for that game on v2.5.1.

What to test

  • Game Mode to Desktop and back, several times, on a 4K120 TV: 4K120 stays in the list. If it goes missing, please post sudo dmesg | grep -iE "4K120|FRL".
  • 1440p at 100 and 120 Hz: one report of the picture sitting slightly too high after 4K120 had been withdrawn. If you see it, say whether it is still there after a restart.
  • Still wanted from v2.12: a system on the M.2 updating twice in a row, sudo dmesg | grep ps5-ostree-path after a start, and from PS5 Pro owners the three GPU clock lines in the v2.12 notes.

Sharing logs

bash <(curl -fsSL https://raw.githubusercontent.com/VivaLaVent/ps5-bazzite-deck/main/tools/ps5-report.sh)

Paste its SUMMARY line when you report results, and attach the saved file for a bug report.

Files

  • ps5-bazzite-deck-bootc-v2.12.1.img.7z.* – bootc disk image, 7-Zip multi-volume (extract from .001)
  • bazzite-bootc-loader-v2.12.1.elf – the PS5 Linux loader for this release: soniciso1's ps5-linux-loader, which also hands Linux the PS5 Pro GPU firmware, the Wi-Fi firmware and the console's Bluetooth pairings
  • bazzite-bootc-loader-v2.12.1.elf.sha256 – loader checksum
  • ps5-bazzite-deck-v2.12.1-update.tar.xz – the last in-place update for Legacy installs, which are no longer supported
  • ps5-bazzite-deck-v2.12.1-update.tar.xz.sha256 – checksum
  • linux-ps5-7.3.3-1.x86_64.rpm – PS5 Linux kernel RPM (used by the bootc image build)
  • ps5-bazzite-deck-bootc-v2.12.1.img.sha256

Found a problem? Run ps5-report on the PS5 and post the file it saves in Discord.
Like the project? Support it on Ko-fi.

Don't miss a new ps5-bazzite-deck release

NewReleases is sending notifications on new releases.