Announcing v1.0.8 - MANDATORY UPGRADE FOR MAINNET AND TESTNET

MAINNET UPGRADE REQUIRED BY BLOCK 2578653, EXPECTED THIS COMING TUESDAY, 17:00 UTC

TESTNET UPGRADE REQUIRED BY TESTNET BLOCK 69013, EXPECTED THIS SATURDAY, 17:00 UTC

Once we pass the blocks above, we will remove the DeFi oracle notification, and all PBaaS and DeFi functions, including currency and chain launches, will reactivate on mainnet with full function and some new capabilities described below. To ensure a smooth transition on testnet and a resulting testnet with only refunded or launched currencies, none in between, and no extra work to make that true, we have also pushed a testnet DeFi oracle notification that will be removed Saturday morning.

What’s New

Fixes: Two related issues around the time of the whales launch made it clear that we were not handling the maximum limits of currency launches properly and were allowing people to exceed those limits in their pre-launch participation, even though these features had been working in basic testing that did not push edge conditions. While it’s related to the fact that there are pre-launch and post-launch phases of a currency launch that may even happen on different chains, the way these limits were handled in the pre-1.0.8 protocol made it very difficult/impossible to cleanly handle all edge cases we were throwing at it, especially once we added the complexity of co-launching a bridge currency and PBaaS chain, and the pre-launch and post-launch being resolved on different chains. To ensure we have all of that covered, @Asherda and @alexenglish really stepped up with heroic levels of contribution to testing, release prep, and confirming every possible edge case we could construct, enabling us to have confidence that the new way of handling everything is complete, robust, and has as close to 100% test coverage on all launch cases as is reasonably possible. Of course, we will be happy to have lots of testing after the activation on testnet and lots of use on mainnet.

New feature: Pre-1.0.8, in addition to an unlimited number of multi-currency liquidity basket configurations, you could also launch decentralized or centralized tokens, crowdfunding style, and even allow people to pre-convert to native PBaaS currencies. For non-liquidity tokens, converted funds for tokens are sent to the ID of the token or chain, meaning that these types of tokens are well suited for complex payment resolution or can be used for non-financial things like forms of voting or tracking as well.

Prior to v1.0.8, the only currency that could be used for pre-launch in tokens of this kind was either Verus or the native currency of the PBaaS chain launching such a currency. In 1.0.8, up to 9 additional currencies can be used along with the native currency, each having its own minimum and maximum participation levels, whether the launch is on-chain or launching a chain. That means that you could launch a token or blockchain with independent conversion rates and currency options set for conversion from Verus, Ethereum, DAI, a branded currency, project currency, or any other currency available on the launching chain. For example, if a project that has a token, like an ERC20 wanted to migrate their entire network to an independent, fully functional PBaaS blockchain, they could enable holders of that token to use the protocol to participate in a 1:1 or 10:1 pre-launch for the native currency of the new blockchain. While every launch does need to accept the native currency of the blockchain launching it, min and max limits are supported on all currencies in the launch, enabling an unlimited number of new launch possibilities. After going through testing scenario upon testing scenario and every permutation we could come up with to throw at it, I’m convinced that this new capability is a powerful tool to round out our already quite complete protocol for the Internet of Value.

I am really looking forward to Tuesday and expect to start taking full advantage of Verus currencies from that point on. I also expect to help with a number of project chain launches after that as well.

We’re a community project building fully in the open, and while it would have been great to skip having these issues altogether, I am grateful and truly impressed with the pulling together over the past week as some of us have been putting all we’ve got into this release. I feel very good about v1.0.8 and the network’s state in general, both testnet and mainnet. Thank you all for helping us get here, now let’s all upgrade, remove the DeFi oracle, and get some mainnet projects truly underway!

Additional Verus Capabilities

On-chain Launches of Token, Centralized Currency, and Liquidity Basket AMMs
On-chain Launches and Merge Mining of Independent, Connected, Interoperable Blockchains without Programming
On-chain Self Sovereign, Provable Identities, NFTs, and Individual or Organizational Profiles

Verus ID and NFT Marketplace

Buy and sell VerusIDs on-chain, advertising your offer directly to the owner of an ID or NFT, or posting the sale of your NFT on the worldwide blockchain for all the world to see. Execute transactions in a completely decentralized way. Pay or offer to pay from a transparent or zero-knowledge private address, still auditable by you. Accept payment to either as well, and best of all, execute your transactions directly, peer-to-peer without any intermediary necessary. Don’t worry the on-chain model still makes room for owners to select and share proceeds with value added agents, marketing organizations, or other participants in a new economy of provable digital ownership. It’s the next step in the evolution of VerusID, the most powerful self-sovereign identity and secure storage model for funds in the digital world.

Verus Vault

With Verus Vault you can now protect funds on a VerusID, even from theft of a private key! If you lock your VerusID with Vault you cannot spend funds from that identity at all until it is again unlocked. While locked, you can still stake those same funds on the Verus network and earn by doing so. Of course, you can also still receive funds.

IT IS IMPORTANT TO NOTE THAT ENABLING REVOCATION, RECOVERY, AND ALL VERUS VAULT CAPABILITIES REQUIRE YOU TO HAVE ONE PRIMARY IDENTITY, AND AT LEAST ONE REVOCATION/RECOVERY ID CONFIGURED.

A locked VerusID can always be revoked and recovered by its revocation and recovery authority identities, which circumvents the lock. At the same time, anyone with only the primary keys, even a multisig of primary keys must first unlock, then wait for the predetermined unlock time before they can spend or access funds. This gives you, or maybe a company that specializes in watching the blockchain to whom you've assigned the revocation ID to revoke and recover whenever an unauthorized unlock occurs. That means that like a bank, setting a 24 hour unlock delay on your locked IDs actually provides the first decentralized solution to the infamous 5 dollar wrench attack.

In addition to a new level of blockchain protection and decentralized funds recovery, Verus Vault provides the same security for your IDs and NFTs as well as time locks for other purposes, such as vesting schedules, trusts, and inheritance. With Verus Vault, you can now protect and recover your funds, preserving all your assets and generational blockchain wealth from common forms of crypto loss or theft, no bank required.

New Verus Multicurrency, Multichain, DeFi Enabled Testnet

With an easy GUI for basic operations or command line for more advanced functions. Without any programming, you can now create new identities, currencies, liquidity pools, and blockchains for your business, your government, your projects, a worthy cause, your family, or your next decentralized application suite. Send currencies worldwide on the same chain, or across blockchains with ease. Even convert currencies to others on the network without an exchange by sending to yourself and converting along the way.

The new Verus testnet is a full-featured, intrinsically decentralized multi-chain blockchain platform with an unlimited number of identities, currencies, liquidity pools, and blockchains. It is accessible from the released versions of Verus Desktop and Verus CLI wallets, and it is the beginning of a new age in crypto. There are so many things you can do with Verus that you cannot with any other cryptocurrency platform, and you can try them all today.

As Verus PBaaS offers completely new capabilities that go beyond today’s decentralized platforms in many fundamental ways, the worldwide Verus community put its energy into creation, rather than convincing everyone that its capabilities are possible. Members across the Verus worldwide community have worked hard to make this all possible, and we are more than excited that you can now experience it firsthand. If you have an interest in the future of crypto, you owe it to yourself to learn about Verus, an unlimited scale, decentralized future with truth and privacy for all.

The Verus testnet, available in the Verus Desktop or cli wallets as the VRSCTEST coin, has the following capabilities, which to our knowledge are unique in crypto today.

Self sovereign, revocable, recoverable identities (currently on mainnet) VerusID

Enables permissionless registration of friendly name strong identities and funds addresses that are simultaneously fully self-sovereign, revocable, and recoverable.

Staking-capable time locking and theft prevention (Verus Vault)

Enables identities to be locked, preventing any funds under their control from being spent while locked, but still allowing seamless staking of funds. When locked, a user specifies an unlock delay, typically long enough to notice when someone who might have compromised a user’s keys would have to unlock the ID before spending. The only way to circumvent the unlock delay is to revoke and recover an ID. Users may also choose to create and use fresh private keys when unlocking an ID as well. This enables virtually theft proof workflow and a solution to inheritance, trusts, vesting schedules, the 5$ wrench attack, and identity theft. IDs may be used as friendly name cryptocurrency addresses for all currencies on all Verus PBaaS blockchains in the Verus network. The VerusID protocol is a protocol, which can also be implemented on non-Verus systems.

Multi-currency, user created, decentralized tokens and merge-mineable, interoperable blockchains without programming

Enables any user with an ID to create their own token currency or even full fledged, multi-currency, ID-issuing 50% POW/50% POS, 51% hash attack resistant blockchain that can send and receive from the Verus chain which launched it. All PBaaS chains run from the same daemon, and projects may choose to join the worldwide Verus community in improving the daemon. In doing so, they will start with a complete, multi-currency, ID-capable blockchain with DeFi capabilities that is merge-mineable and stakeable with other blockchains in the Verus network.

Consensus integrated DeFi liquidity pools and fractional currency baskets

Any ID owner may define Verus DeFi fractional basket currencies with one or more asset currencies backing the liquidity pool at a fractional percentage ranging from 5% to 100% backing. The Verus DeFi protocol ensures that all currency conversions that use a particular liquidity pool and are mined into one block are solved and priced simultaneously, addressing the problems of miner extracted value (MEV) and front-running, while providing fee-based DeFi integrated incentives to miners and stakers, ensuring smooth consensus operation and fee conversion capabilities by integrating DeFi liquidity pools directly into the consensus and cross-chain bridge protocols.

Simultaneous blockchain and blockchain liquidity pool launches

Launch of a world class, worldwide, merge-mineable blockchain along with a fully decentralized or centralized “bridge” converter liquidity pool as part of defining a new blockchain. Bridge converter currencies have the same flexibility as other fractional 100% asset backed or partially asset backed currencies, but is bound to the launch of the new blockchain, runs on the new blockchain, and all fees generated via cross chain fee conversions or general use of the liquidity pool are earned on the new blockchain with no rent going back to the Verus blockchain, only seamless connectivity.

Blockchain-based, crowdfunding currency launches with minimum participation or automatic refunds, including for dual launches (blockchain and bridge)

Set required minimum levels of worldwide participation in your preferred currencies on chain. If by the start time of your blockchain, minimums are not met, all participants will automatically get a refund of all of their pre-conversions, less the network fees. The launch options also provide for maximum participation in one or more currencies, pre-launch discounts, price neutral pre-allocations to select IDs that increase the fractional reserve ratio to issue currencies, similarly price neutral carve-outs of proceeds, and pre-launch discounts for early participants. Using VerusIDs, launches can also include vesting schedules in the pre-allocations as well.

An interoperable, multichain network for new use cases and unlimited scale**

The Verus multi-currency, multi-chain network allows the creation of an unlimited number of interoperable blockchains in the Verus network. Notary IDs, specified at chain definition, provide decentralized blockchain-specific bridge confirmation, enabling public blockchains available to the world for merge mining and staking, as well as private, internal blockchains, which are easy to setup with easy bridging of public currencies into an organization and onto their internal private network and back, with all features and currencies of the public chain but none of the access. There is no limit on the number of blockchains that may continuously operate and interoperate on the Verus network. While there is some overhead for cross notarization, the model for the Verus blockchain network is fractal, enabling an unlimited number of simultaneously operating, interoperable blockchains.

Locking and Unlocking IDs

Time Lock:
The unlockatblock parameter defines the unlock height of the identity.

run setidentitytimelock "id@" '{"unlockatblock": <Unlock block height>}'

Time Delay:
The setunlockdelay parameter defines how many blocks to delay an ID's unlock when the flags are set back to an unlocked state.

run setidentitytimelock "id@" '{"setunlockdelay": <Unlock block delay>}'

Revoking an identity will clear its locked status, regardless of time delay or unlock height.
A locked identity cannot revoke itself.

Conversion Queries

The getcurrencyconverters API retrieves all currencies that have at least 1000 VRSC in reserve, are greater than 10% VRSC reserve ratio, and have all listed currencies as reserves

E.g. BTC ETH:

run getcurrencyconverters btc eth

Will return all currencies that have btc/eth markets at or above the liquidity threshold.

Sending and Converting Currency

Warning: All testnet coins/currencies have no value and will disappear whenever VRSCTEST is reset

The sendcurrency API can be used to send and convert funds.

Sending VRSCTEST from a single address (bob@) to a single recipient (alice@):

run sendcurrency "bob@" '[{"currency":"vrsctest","address":"alice@","amount":10}]'

Sending VRSCTEST from all private wallet funds to two recipients with friendly-name z-addresses (alice@:private and bob@:private):

run sendcurrency "*Z" '[{"currency":"vrsctest","address":"alice@:private","amount":10},{"currency":"VRSCTEST","address":"bob@:private","amount":10}]'

Converting VRSCTEST to a fractional basket currency, VRSC-BTC using IDs as a funding source:

run sendcurrency "*i" '[{"address":"bob@","amount":10, "convertto":"VRSC-BTC"}]'

Converting VRSCTEST to another reserve, BTC through a fractional currency, VRSC-BTC:

run sendcurrency "*" '[{"address":"bob@","amount":10, "convertto":"BTC","via":"VRSC-BTC"}]'

Preconverting to new currency, NEWCOIN, before it is active:

run sendcurrency "*" '[{"address":"alice@","amount":10, "convertto":"NEWCOIN", "preconvert":true, "refundto":"alice@"}]'

Sending VRSCTEST cross-chain to PBaaSChain:

run sendcurrency "*" '[{"address":"RXLYm4J6qi7yam9zXtkEkRwbvCrnWKGZuv","amount":10, "exportto":"Bridge.PBaaSChain"}]'

Converting VRSCTEST cross-chain to PBaaSChain:

run sendcurrency "*" '[{"address":"RXLYm4J6qi7yam9zXtkEkRwbvCrnWKGZuv","amount":10, "convertto":"PBaaSChain","exportto":"Bridge.PBaaSChain","via":"Bridge.PBaaSChain"}]'

Converting PBaaSChain to VRSCTEST:

verus -chain=PBaaSChain sendcurrency "*" '[{"address":"RXLYm4J6qi7yam9zXtkEkRwbvCrnWKGZuv","amount":10, "convertto":"VRSCTEST","exportto":"VRSCTEST","via":"Bridge.PBaaSChain"}]'

Defining a Currency

Currency Options

OPTION_FRACTIONAL = 1                  // allows reserve conversion using base calculations when set
OPTION_ID_ISSUANCE = 2                 // clear is permissionless, if set, IDs may only be created by controlling ID
OPTION_ID_STAKING = 4                  // all IDs on chain stake equally, rather than value-based staking
OPTION_ID_REFERRALS = 8                // if set, this chain supports referrals
OPTION_ID_REFERRALREQUIRED = 16        // if set, this chain requires referrals
OPTION_TOKEN = 32                      // if set, this is a token, not a native currency
OPTION_SINGLECURRENCY = 64             // for PBaaS chains or gateways to potentially restrict to single currency
OPTION_GATEWAY = 128                   // if set, this routes external currencies
OPTION_PBAAS = 256                     // this is a PBaaS chain definition
OPTION_GATEWAY_CONVERTER = 512         // this means that for a specific PBaaS gateway, this is the default converter and will publish prices
OPTION_GATEWAY_NAMECONTROLLER = 1024   // when not set on a gateway, top level ID and currency registration happen on launch chain 
OPTION_NFT_TOKEN = 2048                // single satoshi NFT token, tokenizes control over the root ID

To create a currency of a specific name, you need an ID of the same name. The controller of this ID is the only one who can create a currency of that name, and they can only do so once.
So, let's hypothetically assume I have 3 IDs, one named gold@, one named mycoin@, and one named mike@. I would like to have one currency, gold@,
that I somehow launch in a way that maps it in a way that can be widely trusted to a specific, auditable store of gold.
I also would like to launch a token called mycoin@, which is something like a Kickstarter, where a business, "my", offers to attribute the coins some utility or product value if the purchase exceeds a certain level.
First, I could define the currency "gold" as follows:

run definecurrency '{"name":"gold","options":32,"currencies":["vrsctest"],"conversions":[0.01],"minpreconversion":[1000],"preallocations":[{"mike@":50000000.00000000}]}'

of course, since this is a test currency, I send myself some to start. The identity of the currency must be funded with at least 10 VRSCTEST before sending the transaction returned from this command to
initiate a currency launch that will start at 50 blocks from when it was made (default), and that must have 1000 VRSCTEST preconverted at 0.01 VRSCTEST per GOLD in order to launch.
all of this happens as part of the mining process, since mining the blocks that launch a currency earn the 0.025% conversion fees of participation
in the launch, converting VRSCTEST to GOLD. I could send the following command before the block where GOLD token launches.
After it launches, the only way at present to create new tokens is with a centralized issuance option. To convert VRSCTEST to GOLD, you could issue the command:

run sendcurrency "*" '[{"address":"mike@","convertto":"gold","preconvert":1,"amount":100}]'

that would effectively park my conversion until the token launches, at which point, I will either find 0.975 GOLD in my wallet, or I will have my VRSCTEST back.
Assuming it launches, and I later want to create mycoin, which can be converted to with either GOLD or VRSCTEST, I can create mycoin with:

run definecurrency '{"name":"mycoin","options":33, "proofprotocol":2,"currencies":["vrsctest", "gold"],"minpreconversion":[10000,5.1298]}, "initialsupply":20000'

In "mycoin", I set proofprotocol to 2, which is PROOF_CHAINID. That means that the controller of the chain ID can mint new coins as follows:

run sendcurrency "mycoin@" '[{"address":"mike@","currency":"mycoin","mintnew":1,"amount":10000}]'

Defining a PBaaS blockchain

  {
  "name": "PBaaSChain",
  "options": 264,
  "currencies": [
    "VRSCTEST"
  ],
  "conversions": [
    1
  ],
  "eras": [
    {
      "reward": 1200000000,
      "decay": 0,
      "halving": 0,
      "eraend": 0
    }
  ],
  "notaries": [
    "Notary1@",
    "Notary2@",
    "Notary3@"
  ],
  "minnotariesconfirm": 2,
  "nodes": [
    {
      "networkaddress": "111.111.111.111:10000",
      "nodeidentity": "Node1@"
    },
    {
      "networkaddress": "111.111.111.112:10000",
      "nodeidentity": "Node2@"
    }
  ],
  "gatewayconvertername": "Bridge",
  "gatewayconverterissuance": 1000000
}

The bridge definition has overridable defaults

  {
  "currencies": [
    "VRSCTEST",
    "PBaaSChain",
    "USD"
  ],
  "initialcontributions": [
    380228.12033701,
    0,
    1000000
  ],
  "initialsupply": 3000000
}

Now pass those definitions to definecurrency

run definecurrency '{"name":"PBaaSChain","options":264,"currencies":["VRSCTEST"],"conversions":[1],"eras":[{"reward":1200000000,"decay":0,"halving":0,"eraend":0}],"notaries":["Notary1@","Notary2@","Notary3@"],"minnotariesconfirm":2,"nodes":[{"networkaddress":"111.111.111.111:10000","nodeidentity":"Node1@"},{"networkaddress":"111.111.111.112:10000","nodeidentity":"Node2@"}],"gatewayconvertername":"Bridge","gatewayconverterissuance":1000000}' '{"currencies":["VRSCTEST","PBaaSChain","USD"],"initialcontributions":[371747.20398827,0,1000000],"initialsupply":3000000}'

Exporting an ID to a PBaaS chain

run sendcurrency "*" '[{"address":"IDNAME@","exportto":"PBaaSChainName","exportid":"true","amount":100,"currency":"vrsctest"}]'

Signing transactions from multi-signature IDs (testnet and mainnet)

Create transaction, get raw transaction data:

verus sendcurrency <multi-signature-ID>@ '[{"address":"<destination_address>","amount":<transaction_amount>}]'
verus z_getoperationstatus <operation_id_returned_by_sendcurrency>

Take the raw hex transaction data provided by z_getoperationstatus to each additional wallet(s) containing the additional signing addresses/IDs:

verus signrawtransaction <raw_hex_transaction>

After the last necessary signature is applied, broadcast on the network using:

verus sendrawtransaction <raw_hex_signed_transaction>

Tokenizing ID control (next generation NFT):

The currency definition have flags OPTION_NFT_TOKEN + OPTION_TOKEN, and a max supply of 1 satoshi that is either pre allocated or pre-converted to. If the token is pre-allocated, then the maximum pre-conversion must be 0.

run definecurrency '{"name":"ID","options":2080,"preallocations":[{"ControlTokenRecipient@":0.00000001}],"maxpreconversion":[0]}'

Creating an identity with a fractional currency as its parent

registernamecommitment now takes two more positional arguments to specify a currency parent and a funding address. Use quotes "" to leave fields blank, the example below specifies a parent currency, vrsc-btc , but no referrer. We're now able to use z_addresses to fund the name commitment and identity registration

# run registernamecommitment name controladdress referral parent sourceoffunds
run registernamecommitment subID RDnf7mH7RQki9b7PqdBD2Er6WXv3DTawGr "" vrsc-btc zs1s2mteau9tcalvk55cnepw3aq7dr6w7f447pqqkxczat3a02208d3ersx60wz9srw3nkd25ppfny

Specify the parent in the identity definition. Enter false for returntx to sign and submit the id registration, 0 for the feeoffer to use the default fee, and the funding identity, transparent address, or z-address

# run registeridentity '{ID registration with name commitment}' returntx feeoffer sourceoffunds

run registeridentity '{"txid": "67635331cbccb7a2cbf408a9e97b3f8986133964e0315a8b9fd237a5fd95ac8f","namereservation": { "version": 1,  "name": "ID",  "parent": "i84mndBk2Znydpgm9T9pTjVvBnHkhErzLt", "salt": "b7070f2ca7495e49c85ab41b5a368150e2c217be6d08cc4102a1b682cddb6f01", "referral": ""},"identity":{"primaryaddresses":["RDnf7mH7RQki9b7PqdBD2Er6WXv3DTawGr"],"minimumsignatures":1,"name":"ID","parent":"vrsc-btc@"}}' false 0 zs1s2mteau9tcalvk55cnepw3aq7dr6w7f447pqqkxczat3a02208d3ersx60wz9srw3nkd25ppfny

If a currency's ID issuance require permission from the currency's identity then it must sign the name commitment and identity registration. Either use the parent identity to fund those transactions, or receive a raw transaction to give the identity owner to sign by setting returntx to true

Limitations in multi-currency to be aware of:

(GUI and CLI) You will not be able to make a currency from an ID that has a properly encoded i-address as its actual name, not its calculated ID. Generally, the advice is “don’t do that”. Using an i-address when referring to a currency will only be interpreted as referring to the currency or identity which has that i-address calculated based on its name registration. As a general rule, making an ID with an i-address as its name is not prevented by the protocol, but will cause problems whenever an i-address or name may be used (many cases) and will not be supported for creating currencies. To reduce any potential for user confusion, even though the naming system provides will also be expanding the set of characters that will not be allowed for currency registrations.
(GUI) If a currency is supported in the Verus Desktop already, such as BTC or ETH, you will not be able to use those same named currencies as a PBaaS chain. This limitation is considered errata for this testnet release and will not be a limitation before mainnet availability.

Disclaimer

This is experimental and unfinished software. Use at your own risk! No warranty for any kind of damage!
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The enclosed copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

MacOS: https://www.virustotal.com/gui/file/0285d33506fde67f01d189ccf608d495fc660e0fccd8c77854877cecb7a8199a/detection
Linux-x86-64: https://www.virustotal.com/gui/file/9a6ca2e3e41ddfc1a173125afc4a0ebd9c13f889b21e21d1dbdafa1046853508/detection
Linux-ARM64: https://www.virustotal.com/gui/file/c0aadc76d39663eaa05516a8ac0dcd4fec7368b849636be9b914b9738fc7d639/detection
Windows: https://www.virustotal.com/gui/file/5f8dcd7db4d26aaffd1dafd5d55a3282d3fe59e4fc6b0ccc2938de3ce18400cd/detection

Avast and Kaspersky may flag the software as "not-a-virus" or "PUP". These are warnings that you are installing mining software, which may be installed by a third party to exploit your PC.
To find out more about the false positives, review the following resources:
https://blog.malwarebytes.com/detections/pup-optional-bitcoinminer/
https://www.kaspersky.com/blog/not-a-virus/18015/

Verifying Downloads

A txt file containing the signer, standard sha256 file checksum, and signature, is included for each download. These packages have been signed with the identity "Verus Coin Foundation Releases@".

Extract downloaded archive
Verify signature for the extracted app or installer using the extracted textfile.
Run installer or place appimage in desired directory

VerusCoin/Verus-Desktop v1.0.8 on GitHub