github TheUnboundDeveloper/AM-Reaper v3.8.0-beta-RT-BE88U
Reaper v3.8.0-beta — RT-BE88U

pre-release45 minutes ago

v3.8.0 — VPN-routed guest networks reach the internet; the portal passcode on every subnet; DHCP leases kept across a restart; one rule for device names; Wallguard finds the culprit

Everything in v3.7.9 is included. Both lines carry the same changes: RT-BE96U, RT-BE86U, RT-BE88U and GT-BE98 Pro on
3006.102.10; GT-BE98, GT-BE19000, BQ16 and BQ16 Pro on 3006.102.8.

  • Guest networks routed into a VPN. A guest network that VPN Director (or an OpenVPN client set to redirect all
    traffic) sent into a VPN tunnel had no internet: guest isolation only allowed the WAN or the network's own bound
    client. It now follows those rules. Not on a Guest Portal network, and not with the network's Kill Switch on.
    Changing VPN Director's rules re-applies it straight away.
  • Guest Portal passcode on a short subnet. On some portal subnets the router checked the passcode against the
    wrong key, so a correct passcode and the terms page were refused. The portal network is now matched properly.
  • Apple devices on an isolated guest network keep DNS. An isolated guest network was offered the router's
    encrypted DNS, which it cannot reach; iPhones take that offer by themselves and then lost DNS. The offer is now
    made only where it works.
  • Login name. The first-setup page no longer forces the login name to lower case; it follows the stock rule.
  • Network page. Editing the Default IoT Network no longer resets its LAN ports to All (Default).
  • Warden custom feeds with an API key. A feed address may contain $APIkey. The key goes in its own box, stays
    private on the router (not in the list, the page or a settings export) and is used only when the feed is fetched.
  • DHCP leases survive a restart. The router keeps its lease lists in flash and puts them back when it starts, so
    every device that still holds a lease is listed (and named) right after a reboot, not only once it renews.
  • Device names. One rule on every page: Name is the name you gave the device on the Devices page; Hostname is
    what the device sends, else the maker of its network card, else Private-Address for a randomized address. A
    page with one label shows Name, else Hostname. DHCP Leases shows both columns and lists devices whose address is
    set on the device; its Refresh button shows it was pressed. A DHCP reservation's name is the device's DNS name and
    is labelled so.
  • Wallguard finds the culprit. A streaming app that broke under Wallguard (a Paramount+ report) showed nothing
    useful on the page. Every block now records the device it came from, so Unbreak finds a device by name; it keeps
    an hour of history and leaves out names you have allowed. A name hidden behind a CNAME alias is shown as
    "asked name (blocked via listed name)", and allowing the asked name now lifts the block. Lists kept on a USB
    store are kept current (they were rejected after a reboot), and a skipped list rebuild is reported on the page.
  • Wallguard page in tabs. Overview (Fix a device, Pause with a 10-minute choice, Why?), Lists, Rules, Devices
    (one row per device with its profile, blocked lookups in the last 15 minutes, Fix and Pause) and Activity.
  • QoS defaults. On a new or factory-reset router QoS is off (as before), and the HW QoS Classful profile now
    starts Web/VoIP at a 90% ceiling instead of 100%. Routers that already have QoS rates keep their own.

Images & checksums (RT-BE88U)

Two flashable images: + AI Advisor (default) and Standard (noMCP, all AI components compiled out entirely). Flash the *_nand_squashfs.pkgtb via Administration > Firmware Upgrade.

This is a beta release. Its filename carries _BETA and the router reports the same string on the dashboard and the About page, so you can always tell which channel a flashed image came from. Stable releases carry no marker.

Variant File SHA-256
+ AI Advisor RT-BE88U_3006_102.10_Reaper_v3.8.0_BETA_nand_squashfs.pkgtb 2a66f1a678012230c96eb9d4b17486e090c5c8fff29b0ce7a42b4977cbfb976d
Standard RT-BE88U_3006_102.10_Reaper_v3.8.0_BETA_noMCP_nand_squashfs.pkgtb 446ad8452dfb3793888fd47b63274e1d378365d36fd4c1649d7c19b486e7ea1e

Verify a download against the attached SHA256SUMS-RT-BE88U-Reaper_v3.8.0.txt.


Corresponding source & reproducibility

The RT-BE88U image for v3.8.0-beta is built from this repository at tag v3.8.0-beta-RT-BE88U: the pinned Asuswrt-Merlin base (3006.102.10, ca72a61f8bc) plus the complete patch series. The tag freezes the exact source that produced it.

The auto-attached Source code (zip/tar.gz) asset below is this repository at tag v3.8.0-beta-RT-BE88U (patches + docs).

Don't miss a new AM-Reaper release

NewReleases is sending notifications on new releases.