TheUnboundDeveloper/AM-Reaper v3.7.7-beta-GT-BE98_PRO

Reaper v3.7.7-beta — GT-BE98_PRO

on GitHub

v3.7.7 — Guest Portal: create, sign-in, isolation and guest DNS that hold; a quicker finish after sign-in; the system log capped; the WAN status follows the internet check

Everything in v3.7.6 is included. Both lines carry the same changes: RT-BE96U, RT-BE86U, RT-BE88U and GT-BE98 Pro on
3006.102.10; GT-BE98, GT-BE19000, BQ16 and BQ16 Pro on 3006.102.8.

• Guest Portal networks are built when you create them. On a router with AiMesh, creating a Guest Network Pro
  network from the Network page saved the settings and built nothing (no Wi-Fi restart, no bridge, no portal) until
  a reboot, and one switched off stayed on. The router now applies a guest-network change itself when the request
  does not arrive, and the portal starts and stops with its network.
• Guests are kept to the Internet. A guest or Guest Portal device reaches only the Internet (or its network's VPN
  client) and the router only for DHCP, DNS and the sign-in page; no main-network device, no other guest network,
  no router service. Access Intranet on a portal network opens the main network only. A VPN binding starts with its
  Kill Switch on.
• Sign-in works on current phones and finishes quickly. The "Sign in to network" sheet opens even when the
  network's DNS has no upstream; the success page waits until the Internet answers; after sign-in a phone no longer
  waits about 30 seconds on the address it was given before sign-in. A Free Wi-Fi portal is terms-only (no
  passcode), and each router makes its own portal secret.
• Guest DNS. Guests' lookups always go to their network's own resolver (a DNS server set by hand on the device,
  or DNS-over-TLS, does not bypass it), and guests without intranet access cannot look up main-network names. The
  network's DNS Server setting picks the guests' provider; left empty, guests use Cloudflare for Families over
  DNS-over-TLS. A network bound to a VPN keeps the tunnel's DNS.
• Traffic Analyzer. A Guest Portal panel on the Live tab lists each guest with their speed and session time; a
  removed network leaves the live view; a chosen timeframe lists only devices that moved traffic; a bar is the row's
  share of the total; a guest network's accelerated uploads are no longer also counted as the router's own.
• The system log cannot be flooded. One kind of message repeating fast (a device looping on DHCP, a driver
  printing per packet) is written at most 300 times at once and 10 times a second after that, with a line saying
  how many were left out, so the log on flash keeps its history. Critical messages and the remote log server are
  not limited.
• WAN status. The header and dashboard say Connected only while the router's own Internet check passes on the
  line, and IPv6 counts as up only with a working route. Native IPv6 that did not come back after an ISP outage is
  asked for again.
• DNS Health Check. When no new name resolves, it names the upstreams dnsmasq really uses, and says when a
  leftover custom dnsmasq.conf replaces the router's own configuration or the silent upstream is on the router
  itself (an add-on that was removed).
• Pages. Buttons that start something show Working..., then Done or Failed; Wallguard's state column is green
  for ok and amber for a fault; the About page credits the people who made Reaper possible.
• Smaller fixes. The ASUS DDNS client code is deleted (the service itself was already refused); the Rule
  Status Re-check stamp is no longer writable by every user. On the 3006.102.8 line: haveged 1.9.27 and two build
  changes from Asuswrt-Merlin (Eric Sauvageau), already on the 3006.102.10 line.

Images & checksums (GT-BE98_PRO)

Two flashable images: + AI Advisor (default) and Standard (noMCP, all AI components compiled out entirely). Flash the *_nand_squashfs.pkgtb via Administration > Firmware Upgrade.

This is a beta release. Its filename carries _BETA and the router reports the same string on the dashboard and the About page, so you can always tell which channel a flashed image came from. Stable releases carry no marker.

Verify a download against the attached SHA256SUMS-GT-BE98_PRO-Reaper_v3.7.7.txt.

Corresponding source & reproducibility

The GT-BE98_PRO image for v3.7.7-beta is built from this repository at tag v3.7.7-beta-GT-BE98_PRO: the pinned Asuswrt-Merlin base (3006.102.10, ca72a61f8bc) plus the complete patch series. The tag freezes the exact source that produced it.

• Patches: patches/
• Provenance record: provenance/manifest.json
• How to verify: docs/REPRODUCIBILITY.md and docs/SOURCE-AVAILABILITY.md

The auto-attached Source code (zip/tar.gz) asset below is this repository at tag v3.7.7-beta-GT-BE98_PRO (patches + docs).