TheUnboundDeveloper/AM-Reaper v3.4.7-beta-GT-BE98_PRO

Reaper v3.4.7-beta — GT-BE98_PRO

on GitHub

v3.4.7 — security review and threat domains, login watch, the pinned USB store, device presence

Everything in v3.4.6 is included.

• Security review (new, off by default). The self-monitor can now watch for drift: /jffs/scripts,
  /jffs/configs and authorized_keys by content hash, the other /jffs/.ssh files and /jffs/addons
  by size/date, every cron entry that is not Reaper's own, and the exposure settings (NAT, forwards, DMZ,
  UPnP, remote web, SSH, Telnet, custom scripts, WAN DNS, remote syslog, cloud sync). Nothing is reported
  until Accept current state as baseline on Firewall › Status; afterwards each change set is listed on
  that card, logged once (rwatch: security review:) and shown as an amber dashboard bar until accepted.
  Advisory end to end: nothing is undone and no failure is declared. Baseline at
  /jffs/reaper/review/baseline (carried by the full backup); switch rwatch_review; report served by
  reaper_watch.cgi. Section 2.9 of the guide.
• Security Review on the Security Posture card. A sixteenth posture row, paired with Warden:
  amber Disabled, amber No baseline while the switch is on but nothing has been accepted, green
  Baseline (accepted, nothing unreviewed, last check time), red Review with the counts of changes
  and login notices. Painted from the same cached report the dashboard bar reads; the row opens the
  Status tab. After a boot, while no report exists yet, the row shows Baseline in amber and both
  pages say that the first check can take up to 10 minutes (the boot grace plus the next tick). The diagnostics report (v1.3.41) gains the review's state and the threat-domain list
  state in section 12 and 14, with a finding when changes or login bursts are unreviewed or a list is
  switched on but not loaded (counts only, never the sources). Backups: the switches and the exemption
  list ride the settings export; the accepted baseline and the domain cache ride the full backup.
• Security review: failed-login notices. Ten or more failed SSH (dropbear) or web-interface
  (httpd) logins from one source inside one 5-minute check become a notice on the review card and
  one log line per source per hour; Accept clears them. The self-monitor reads the system log from a
  byte cursor and reads the rotated file's tail first when the log shrinks. Advisory only.
• SSH over IPv6 from the internet is rate-limited. The stock brute-force guard is IPv4-only and
  the IPv6 rule for a WAN-open SSH port was a plain accept, at two sites in rc/firewall.c. One
  helper now writes two -m recent rules ahead of that accept at both: the sixth new connection
  from one /64 inside 60 s is dropped (--update, so a flood keeps its own block fresh). xt_recent
  is built into this kernel. WAN only (sshd_enable 1 with the IPv6 firewall on); no switch.
• Warden threat domains (new, off by default). URLhaus and ThreatFox host names, from abuse.ch's
  public hostfiles, become address=/host/ lines in /tmp/rwarden/dns.conf, included by every dnsmasq
  instance (main and each guest/VLAN network) — a lookup of a listed name or anything under it is
  answered NXDOMAIN. Downloads with the nightly feed update (or Update now), keeps each list's previous
  download on a failed fetch, caps at 100,000 names, never blocks the feed hosts, your NTP, DDNS and
  DNS-over-TLS names, the LAN domain or the names you list; restarts dnsmasq once only when the list
  changed; /jffs/rwarden/dns.cache replays at boot. Only devices resolving through the router are
  covered (DoH, own-DNS and VPN clients are not). Keys rwarden_dns, rwarden_dns_feeds; list
  dnsallow. Guide 4.3.10. Also: the country-list fetch is now redirect-pinned to https like the
  threat feeds, and the self-monitor's loopback-DNS check retries once before declaring a failure.
• Warden: the country-list host is whitelisted once. www.ipdeny.com (51.15.12.186) is hosted in
  France; with FR selected and the router-self filter on, Warden dropped its own list downloads, the
  15-minute update budget ran out and countries added after that never loaded (27 of 79 on the reporting
  box, shown as blocked). The address is added to the whitelist once, visibly and removably; the update
  now logs a country that has no data as NOT blocked and names every such country in one closing line.
• Devices page: presence behind an AiMesh node. A client the node left out of its client list read
  Wired and stayed connected for the bridge's 5-minute ageing after it left. A radio-port or backhaul
  sighting older than 90 s is no longer presence; an unlisted client behind a wireless backhaul reads
  Wi-Fi via that node. Cabled devices on the router's own ports keep the full ageing. The page also
  refreshes on its own now, every 15 seconds while it is visible and never under an open dialog or a rename
  in progress; it used to fetch once.
• AiMesh channel fit: the node's backhaul stayed off; unknown DFS status counts as DFS. Owner (RT-AX92U
  node, v3.4.6): the node drops channels 116–128 on its 30-minute radar lock-out and, being 160 MHz wide,
  cannot hold 100/160 then; the fit rated 100/160 usable under the 80 MHz cap and read the router's own
  cleared DFS block as non-DFS. A node that does the width now needs the whole channel, flag 4 in the
  controller's list is DFS, and a channel a node stops listing is held for six hours (confirmed on the
  owner's mesh: the 5 GHz backhaul up on 149/80 from boot). Region-neutral: when the router's own entry is
  missing from the mesh channel lists an undetermined channel is no longer treated as radar-free, so the fit
  cannot re-allow or move onto a DFS channel on a guess; it holds and says why.
• Front-chain watchdog names the rule. A front-chain-drift now logs the offending rule text (for
  example -A FORWARD -i tailscale0 -j ACCEPT) and the fix; built-in targets listed in
  /jffs/reaper/front_exempt are ignored and logged (listing ACCEPT there exempted every blanket accept).
  Guide 2.9 shows how a script inserts after Reaper's hook instead of at position 1.
• Long-term storage: one pinned USB volume. Field (RT-BE86U, one SSD with two partitions): both
  partitions grew Reaper's history folders and the traffic history was split between them, because each
  writer took "the first mounted volume" and the mount order changes from boot to boot. The store is now a
  pinned volume: a box already set to USB adopts the volume that holds its history (the most recently
  written one when both do) once it has settled after boot; the Storage page lists the mounted volumes and
  the pin with its state; a missing pinned volume is waited for (history stays in RAM meanwhile), never
  replaced by another. Keys reaper_store_vid, reaper_store_vname.
• Traffic Analyzer: the Latency and Loss tiles no longer vanish. The live figure was the running average
  of the open 5-minute bucket, so it read 0 right after every boundary and for as long as the target was
  unreachable, and the page dropped both tiles on a 0; it now comes from the last 60 seconds of probes. With
  the collector switched off the page says so once, with the switch, instead of drawing empty charts under
  a green Live pill (field, BQ16); its status chips use the two standing colours.
• Firmware page: mesh nodes are no longer all badged "Different version". The node's version string was
  compared with the display form of the router's own, which can never match; version keys are compared now
  (the MCP/noMCP variant and a test build's suffix are not differences; a stock node still reads different).
• Traffic Manager: the Guaranteed-minimums alert and its help now say 85%, the engine's intended budget,
  instead of 100%.
• Dictionaries. 104 tokens added and 5 reworded in all 25 packs, translated (lockstep 7432).

Images & checksums (GT-BE98_PRO)

Two flashable images: + AI Advisor (default) and Standard (noMCP, all AI components compiled out entirely). Flash the *_nand_squashfs.pkgtb via Administration > Firmware Upgrade.

This is a beta release. Its filename carries _BETA and the router reports the same string on the dashboard and the About page, so you can always tell which channel a flashed image came from. Stable releases carry no marker.

Verify a download against the attached SHA256SUMS-GT-BE98_PRO-Reaper_v3.4.7.txt.

Corresponding source & reproducibility

The GT-BE98_PRO image for v3.4.7-beta is built from this repository at tag v3.4.7-beta-GT-BE98_PRO: the pinned Asuswrt-Merlin base (3006.102.8-beta2, a7ebfa133a) plus the complete patch series. The tag freezes the exact source that produced it.

• Patches: patches/
• Provenance record: provenance/manifest.json
• How to verify: docs/REPRODUCIBILITY.md and docs/SOURCE-AVAILABILITY.md

The auto-attached Source code (zip/tar.gz) asset below is this repository at tag v3.4.7-beta-GT-BE98_PRO (patches + docs).