New Features
- Added a Print History entry on the home page to quickly view past print tasks.
- Upgraded the original Model Library entry to Online Models, allowing users to browse and jump to the Snapmaker Space website directly from the home page.
Known issue: If an online model's name contains characters that are not supported in filenames on your system, downloading the model in Snapmaker Orca will fail, and the current version does not show a clear reason for the failure. As a workaround, you can download the model from the web portal. This issue will be fixed in a future release.
- Added a multi-dovetail cutting option alongside the existing single-dovetail cutting to support larger joint sizes.
- Added Mesh Subdivision to improve surface continuity, making model details smoother and enhancing the surface quality of printed parts.
- Added model shadow display to make previews more realistic and three-dimensional. It can be enabled or disabled in Preferences (currently available on Windows and Linux only).
Improvements
- Added a "Don't remind me again" checkbox to the bottom-left of the out-of-memory dialog. The prompt can be restored at any time in Preferences.
- Optimized the top-surface path generation algorithm to improve top infill path quality and surface flatness, enhancing the appearance of printed parts.
- Optimized print speed control for overhang areas to improve overhang quality and reduce stringing and sagging.
-
Significantly improved UI responsiveness and reduced latency during painting.
-
Optimized click-selection responsiveness in large scenes and increased the pick success rate for hollow models, making objects easier to select.
Bug Fixes
-
Fixed the issue where, after enabling the Raft and setting the Support interface fan speed to 50%, this setting was incorrectly applied to the inner and outer walls of the model's first layer.
-
Fixed the issue where, at the end of printing, the nozzle traveled from the model to the wipe tower without lifting, which could cause the tip forming line to be printed incorrectly.
-
Fixed the issue where the retraction before wiping did not match the setting.
-
Fixed the issue where the G-code preview after slicing the same model was inconsistent with the exported G-code when reopened.
-
Fixed the issue where filament was incorrectly assigned for internal bridging in special cases.
-
Fixed the issue where no space was left for the prime tower when the model covered the entire plate.
-
Fixed the issue where the total layers count in the G-code comment line was inconsistent with the layer height shown in the slicing preview.
-
Fixed the issue where overlapping painted areas in multi-color painting were not merged into a single toolpath.
-
Fixed the issue where, when multi-color sub-layers were enabled, the sub-layer height did not match the percentage blend ratio (not 1:1).
-
Fixed the issue where colors were sorted in no particular order when blending three colors in multi-color sub-layers.
-
Fixed the issue where colors were printed incorrectly due to missing toolhead change commands when Subdivide Mix Layer and Prime Tower were enabled.
-
Fixed the issue where part of the model's colors was missing after configuring Color Mixing Match.
-
Fixed the issue where some filaments' mixing ratios were below the Min Mix Ratio in Match mode.
-
Fixed the issue where, after syncing a single filament, the original filament type was still used during slicing and upload/print.
-
Fixed the issue where High Flow could not be applied after modifying the process object configuration.
-
Fixed the issue where the high-flow parameter of the filament tool-change retraction length could not be applied in some scenarios.
-
Fixed the issue where, when setting the brim in a 3MF file containing multiple objects, all brim filament used the filament of the first printed object.
-
Fixed the issue where Default Filament appeared after importing a 3MF file.
-
Fixed the issue where the filament color was displayed incorrectly in the UI after importing a 3MF file.
-
Fixed the issue where the color matching panel and the viewport showed inconsistent colors when importing an OBJ file with color data.
-
Fixed the issue where the software showed an error pop-up when importing an STL file larger than 2 GB.
-
Fixed the issue where the assembly view could not be displayed when the model file was too large.
-
Fixed the issue where other objects could not be selected after combining objects.
-
Fixed the issue where importing certain 3MF files for slicing caused the software to crash.
-
Fixed the issue where AppImage failed to open in some Linux environments due to system language compatibility issues.
-
Fixed the issue where an unsaved process blocked the shutdown or sign-out prompt on Windows.
-
Fixed the issue where the software could randomly crash when quitting on macOS.
-
Fixed the issue where the software crashed on the upload preprocessing and print preprocessing pages on macOS.
-
Fixed the issue where the version update pop-up displayed a white screen on macOS.
-
Fixed the issue where the application crashed during exit when automatic backup was enabled.
-
Fixed the issue where the slicing progress dialog disappeared and canceling slicing was very slow when connecting a device and switching back to the preview page during slicing.
-
Fixed the issue where opening a 3MF file with Snapmaker Orca by double-clicking failed when option "Allow only one Snapmaker Orca instance" was enabled and the software was already running.
-
Fixed the issue where launching Snapmaker Orca from the Mac Space site differed from Windows.
-
Updated the signing policy for the Windows installer package to prevent false positives from antivirus software.
-
Fixed the issue where, when using the Snapmaker Orca CLI slicing command, passing a 3MF project file path as a parameter caused slicing to be rejected due to a version mismatch. (Thanks to community user @KuzuriAo, PR #839.)
-
Fixed the issue where resource copying failed on Windows due to non-ASCII characters (e.g., Chinese) in the path.
-
Fixed the issue where the UI showed Generic ABS filament while the actual filament was Generic PLA.
-
Fixed the issue where the high/low-temperature filament mixing detection did not take effect after copying a model with Ctrl+C / Ctrl+V.
-
Fixed the issue where a blank prompt pop-up appeared when fewer than 4 filaments were defined in the 3MF file.
-
Fixed the issue where the plate could not be switched after opening a gcode.3MF file containing multiple plates.
-
Changed the default nozzle type in printer settings: the default type for the 0.4 mm nozzle was changed from hardened steel to stainless steel, and the default type for the 0.6 mm nozzle was changed from stainless steel to hardened steel. (Thanks to community user @KuzuriAo)
新增功能
- 首页新增打印历史入口,以支持快速查看过往的打印任务记录
- 原模型库入口升级为在线模型,首页即可直接浏览并跳转至 Snapmaker Space 模型网站
已知问题:当在线模型的模型名称中包含系统不支持的文件名字符时,在Snapmaker Orca内下载该模型会失败,且当前版本不会明确提示失败原因。作为临时方案,您可以前往网页端下载该模型,此问题将在后续版本中修复。
- 在原有单燕尾榫切割的基础上,新增多燕尾榫切割选项,满足更大尺寸的拼接需求
- 新增网格细分能力,在细分的同时增强模型表面连续性,让模型细节更平滑精细,提升打印成品的表面质量。
- 支持显示模型的阴影效果,让模型预览更具真实与立体感,您也可以在「偏好设置」中按需开启或关闭(当前仅支持 Windows 与 Linux 平台)。
体验优化
- 内存不足弹窗左下角新增「下次不再提醒」选项,您可选择不再被打扰;同时仍可在「偏好设置」中随时恢复弹窗提示。
- 优化顶面路径生成算法,提升顶面填充的路径质量与表面平整度,改善打印成品的观感。
- 优化悬垂区域的打印速度控制,提升悬垂结构的成型质量,减少拉丝与塌陷。
-
大幅提升涂色过程中的交互响应速度,操作更跟手。
-
优化大场景下的模型点击选中的响应速度,并提升镂空模型的拾取成功机率,让选中对象变得更轻松。
问题修复
-
修复开启筏层后,支撑接触面风扇速度设为 50% 时,模型首层内外墙错误继承支撑接触面风扇设置的问题。
-
修复打印结束时喷嘴从模型到擦拭塔空驶无抬升、可能错误打印尖端成型线的问题。
-
修复擦拭前回抽与设置不符的问题。
-
修复同一模型切片后的 gcode 预览与导出 gcode 重新打开存在数据不一致的问题。
-
修复特殊情况下内部搭桥分配耗材丝不正确的问题。
-
修复模型铺满打印板时未规避擦料塔的问题。
-
修复 gcode 注释行 total layers count 与切片预览层高不一致的问题。
-
修复混色涂色区域覆盖涂色未合并为一条工具路径的问题。
-
修复开启混色子层时子层高度与百分比混合比例不符(非 1:1)的问题。
-
修复混色子层 3 颜色混色时无规则排序的问题。
-
修复启用 Subdivide Mix Layer 和 Prime Tower 时,因缺少工具头切换指令导致颜色打印错误的问题。
-
修复混色匹配后模型颜色部分缺失的问题。
-
修复匹配模式混合比例部分耗材低于最低混色比例的问题。
-
修复单耗材同步后切片、上传打印时仍为原耗材类型的问题。
-
修复工艺对象配置修改后高流量无法应用的问题。
-
修复耗材换刀回抽长度参数的高流量参数部分场景无法应用的问题。
-
修复在包含多对象的 3mf 中设置 brim 时,brim 耗材全部使用第一个打印件耗材的问题。
-
修复 3mf 打开后出现 Default Filament 的问题。
-
修复导入 3mf 耗材颜色 UI 显示错误的问题。
-
修复导入带颜色 obj 文件时颜色匹配面板与视图颜色显示不一致的问题。
-
修复导入超过 2GB STL 文件时软件弹窗报错的问题。
-
修复模型文件过大导致装配体视角无法显示的问题。
-
修复组合对象后其余对象无法选中的问题。
-
修复导入某些3mf 文件进行切片导致软件崩溃闪退的问题。
-
修复 Linux 系统语言兼容问题导致部分环境 AppImage 无法打开的问题。
-
修复 Windows 系统关机/注销时被未保存进程阻塞触发提示的问题。
-
修复 macOS 退出应用时软件可能随机崩溃的问题。
-
修复 macOS 端在上传预处理与打印预处理页面发生崩溃的问题。
-
修复 macOS 更新版本弹窗出现白屏的问题。
-
修复启用自动备份时退出应用过程中闪退的问题。
-
修复切片过程中连接设备、切回预览页时切片进度条弹窗消失、取消切片很慢的问题。
-
修复当设置仅允许一个应用实例且处于运行态时,双击打开 3mf 文件选择 Snapmaker Orca 打开失败的问题。
-
修复 mac 模型站唤醒 Snapmaker Orca 与 Windows 表现不一致的问题。
-
更新Windows 安装包程序签名策略,避免被杀毒软件误报。
-
修复使用 Snapmaker Orca CLI 切片命令时,参数带 3mf 项目文件路径会因版本不匹配被拒绝切片的问题(感谢社区用户 @KuzuriAo,PR #839)。
-
修复 Windows 电脑非 ASCII 编码中文名路径导致的资源拷贝问题。
-
修复 UI 显示为 Generic ABS 耗材但实际为 Generic PLA 耗材的问题。
-
修复通过 Ctrl+C / Ctrl+V 复制模型后,高低温耗材混用检测未生效的问题。
-
修复当 3mf 内定义的耗材个数小于 4 时,弹出内容空白的提示弹窗问题。
-
修复打开包含多盘的 gcode.3mf文件后无法切换打印盘的问题。
-
修改打印机设置中喷嘴类型的默认值:0.4mm喷嘴默认类型从硬化钢改为不锈钢,0.6mm喷嘴默认类型从不锈钢改为硬化钢。(感谢社区用户 @KuzuriAo)