⚠️ EXPERIMENTAL · UNSUPPORTED · USE AT YOUR OWN RISK
This is an unofficial, experimental CoreELEC 22 build. It is NOT an official
CoreELEC release and it is NOT a supported CE22 port. I am not a CoreELEC 22
port maintainer, and I will not be providing support, bug fixes, updates, or
ongoing maintenance for this build.
The only purpose of this build is to give Amlogic AM9 Pro-class users a more
complete Dolby Vision experience than stock CoreELEC 22, by carrying a set of
custom Kodi features I built for my own device. That is the entire scope.
READ THIS BEFORE YOU FLASH ANYTHING
- USE ENTIRELY AT YOUR OWN RISK. There is no warranty of any kind, express
or implied. It may fail to boot, misbehave, break Dolby Vision, or do nothing
useful on your hardware. - BACK UP YOUR CURRENT INSTALLATION FIRST. Take a full CoreELEC backup
(Settings → CoreELEC → Backup) and/or image your existing boot media before
you install anything from here. Assume you may have to restore it. - Prefer a SEPARATE SD card or USB stick you can boot from, instead of
overwriting a working internal (eMMC) install. - Do NOT report problems with this build to the CoreELEC team or forums.
This is not their build; it is not their responsibility. Do not ask them to
support it. - I am also not offering support. If it breaks, you keep both pieces.
By downloading or using any file in this release you accept all of the above.
Install
- Clean install (recommended): flash the
*.img.gzto an SD card or USB with
balenaEtcher (or the Amlogic USB Burning Tool for eMMC), then boot from it. - In-place update: copy the
*.tarto the/storage/.updatefolder on an
existing CoreELEC install and reboot. (Back up first — see above.) - Verify your download against the SHA256 sums below before flashing.
What's changed in this update
This update follows
v22.0-samurihl-20261121210320.
It is that release plus one new feature to try: more accurate chroma (colour)
placement on the Ugoos AM6B+ / S922X (G12B).
⚠️ Still experimental and completely unsupported. See the disclaimer above.
Back up your current install before flashing (Settings → CoreELEC → Backup).
- Tested on the Ugoos AM6B+ (S922X) only. On other chips the new code is
switched off, so they behave exactly like the previous release.- To go back: copy the previous release's
.tarinto/storage/.updateand
reboot, or do a clean install of that release.- Dolby Vision still requires
dovi.ko(the CE22 5.15 build) installed on
your device. It is not bundled; install it yourself as on stock CoreELEC 22.
🎨 Chroma siting: colour lands where the video says it belongs
Design credit: Silverbak. This implements Silverbak's chroma-accuracy
proposal. It ships here first so the design gets real-world feedback.
Most video stores colour at a lower resolution than brightness (4:2:0), and the
stream says where those colour samples sit relative to the brightness pixels.
Stock CoreELEC always assumes one layout. This build follows what the stream
says:
- Vertical (4K HDR, UHD Blu-ray): UHD Blu-ray and most HDR10 put colour on
the top line of each pair ("top-left", type 2). Stock places it half a line
too low and blends every line 75/25. This build lines it up. Kodi passes the
stream's chroma location to the kernel each time a video starts. - Horizontal (4:2:2 HDMI output): where the box converts to 4:2:2 itself,
it now sends the colour sample that belongs with the even pixel (what the HDMI
spec expects) instead of an average shifted half a pixel to the right.
What to expect: the shifts are a fraction of a pixel. On a 4K TV at a
normal seating distance you will probably not see a difference, and our own
side-by-side test on Spears & Munsil patterns didn't show one. It is correct
by the spec, and it hasn't harmed anything visible in our testing. Reports from
people with test patterns, good eyes or a close seat are welcome.
Not changed (kept as stock): interlaced video, 3D/MVC, 4:2:2 and 4:4:4
sources, Dolby Vision dual-layer (FEL/MEL) discs, and all non-G12B chips. At
2160p HDR with 4:2:2 output the conversion happens later, in the HDMI block, so
the horizontal part has no effect there.
Switches for A/B testing (live, no reboot; write over ssh):
Parameter (/sys/module/aml_media/parameters/…)
| Values |
|---|---|
vfmt_chroma_siting
| 0 stock · 1 follow the stream on G12B (default) · 2 any chip
|
hdmitx_422_cosited
| 0 stock average · 1 even pixel on G12B (default) · 2 any chip
|
For example, echo 0 > /sys/module/aml_media/parameters/vfmt_chroma_siting
returns to stock until the next reboot. Values 2 (any chip) are untested.
Source
- CoreELEC (distro):
SamuriHL/CoreELECtagv22.0-samurihl-20261122155202 - Kodi:
SamuriHL/coreelec-xbmctagv22.0-samurihl-20261122155202
Checksums (SHA256)
0fbf0a4ebb3c4797986a96e0b4139d2ef525fcd3d114c76858e6315598ab6ffe CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261122155202.tar
6e5569db2e19056d241e87b521ca6683cc2a4b66958e5d6e7069a0a366bc3485 CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261122155202-Generic.img.gz