⚠️ EXPERIMENTAL · UNSUPPORTED · USE AT YOUR OWN RISK
This is an unofficial, experimental CoreELEC 22 build. It is NOT an official
CoreELEC release and it is NOT a supported CE22 port. I am not a CoreELEC 22
port maintainer, and I will not be providing support, bug fixes, updates, or
ongoing maintenance for this build.
The only purpose of this build is to give Amlogic AM9 Pro-class users a more
complete Dolby Vision experience than stock CoreELEC 22, by carrying a set of
custom Kodi features I built for my own device. That is the entire scope.
READ THIS BEFORE YOU FLASH ANYTHING
- USE ENTIRELY AT YOUR OWN RISK. There is no warranty of any kind, express
or implied. It may fail to boot, misbehave, break Dolby Vision, or do nothing
useful on your hardware. - BACK UP YOUR CURRENT INSTALLATION FIRST. Take a full CoreELEC backup
(Settings → CoreELEC → Backup) and/or image your existing boot media before
you install anything from here. Assume you may have to restore it. - Prefer a SEPARATE SD card or USB stick you can boot from, instead of
overwriting a working internal (eMMC) install. - Do NOT report problems with this build to the CoreELEC team or forums.
This is not their build; it is not their responsibility. Do not ask them to
support it. - I am also not offering support. If it breaks, you keep both pieces.
By downloading or using any file in this release you accept all of the above.
Install
- Clean install (recommended): flash the
*.img.gzto an SD card or USB with
balenaEtcher (or the Amlogic USB Burning Tool for eMMC), then boot from it. - In-place update: copy the
*.tarto the/storage/.updatefolder on an
existing CoreELEC install and reboot. (Back up first — see above.) - Verify your download against the SHA256 sums below before flashing.
What's changed in this update
A same-day follow-up to
v22.0-samurihl-20261121201259,
which this release replaces. Everything in that release is here, plus the
fixes below. If you installed the earlier build today, update to this one.
⚠️ Still experimental and completely unsupported. See the disclaimer above.
Back up your current install before flashing (Settings → CoreELEC → Backup).
- Not tested on a box before release. These fixes passed code review and
build checks only; the AM9 Pro (S905X5) has not been tested this time
either. If something misbehaves, go back to the previous release and please
report it with a debug log.- To go back: copy the previous release's
.tarinto/storage/.updateand
reboot, or do a clean install of that release.- Dolby Vision still requires
dovi.ko(the CE22 5.15 build) installed on
your device. It is not bundled.
🛠️ Fixed since the earlier build today
- Dolby Vision Blu-ray menus started about a second late. On discs such as
M3GAN, the first enhancement-layer packet of a menu clip could arrive before
the video was opened and was thrown away, so the picture waited for the next
group of frames. Those packets are now kept and handed over, in order, with
the first base-layer picture. - Dolby Vision above 60 Hz. With "double refresh rate" or "whole-number
refresh rate" on and 100/120 Hz modes in your whitelist (or an HDMI 2.1 TV that
offers them), a Dolby Vision title, or SDR/HDR10 mapped to Dolby Vision by VS10,
could be put on a 100–120 Hz mode that Dolby Vision cannot carry. Refresh-rate
multiples now stop at 60 Hz whenever the output is Dolby Vision; other outputs
are unchanged. - DVD menus, resume and bookmarks (from matthane's ce-canary):
- Menu during a title, then Resume, now continues from the picture that was on
screen instead of skipping ahead, or replaying the end of the title and
falling back to the menu. - Stop and resume, and bookmarks, now go to the title that was on screen, not
the one Kodi had already read ahead to.
- Menu during a title, then Resume, now continues from the picture that was on
- Blu-ray menu graphics at the screen edge. A menu button or subtitle that a
disc places partly off the screen used to disappear entirely, leaving the old
graphic in its place. It is now drawn and cut off at the edge, as a disc player
shows it. - HEVC after a decoder restart. Every way the video decoder restarts now
waits for the stream's next parameter sets, the same rule CoreELEC applies at
start and seek, so a restart cannot feed the decoder undecodable data.
Credits
As in the earlier release today, plus matthane (ce-canary)
for the DVD menu, resume and screen-edge crop work, and Portisch (CoreELEC),
whose Dolby Vision refresh-rate fix (upstream 3c29623b24) this build adapts.
Under the hood
- Kodi
03435d80c5(10 commits on6e49e2d03f); CoreELEC unchanged apart from
the kodi pin. - libdvdnav patch 08 (ce-canary) adds
dvdnav_get_current_nav_position/
dvdnav_menu_call_from. - Dolby Vision EL packets that arrive before the video stream is open are held
(at most 48), sent ahead of the clip's first base layer in arrival order, and
cleared with their demuxer, stream, flush and demuxer reset.
Source
- CoreELEC (distro):
SamuriHL/CoreELECtagv22.0-samurihl-20261121210320 - Kodi:
SamuriHL/coreelec-xbmctagv22.0-samurihl-20261121210320
Checksums (SHA256)
7e6da193bb47883947fb14392fc74be9e3ff178983cc910a0fdc26f4e94e550e CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261121210320.tar
b652f308721b93be8599f5916eaab1c5a13ac59662a14278d8d3ae41c224b403 CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261121210320-Generic.img.gz