Superseded by
v22.0-samurihl-20261121210320(same day: menu-start, Dolby Vision >60 Hz, DVD resume and other fixes). Please use that release.
⚠️ EXPERIMENTAL · UNSUPPORTED · USE AT YOUR OWN RISK
This is an unofficial, experimental CoreELEC 22 build. It is NOT an official
CoreELEC release and it is NOT a supported CE22 port. I am not a CoreELEC 22
port maintainer, and I will not be providing support, bug fixes, updates, or
ongoing maintenance for this build.
The only purpose of this build is to give Amlogic AM9 Pro-class users a more
complete Dolby Vision experience than stock CoreELEC 22, by carrying a set of
custom Kodi features I built for my own device. That is the entire scope.
READ THIS BEFORE YOU FLASH ANYTHING
- USE ENTIRELY AT YOUR OWN RISK. There is no warranty of any kind, express
or implied. It may fail to boot, misbehave, break Dolby Vision, or do nothing
useful on your hardware. - BACK UP YOUR CURRENT INSTALLATION FIRST. Take a full CoreELEC backup
(Settings → CoreELEC → Backup) and/or image your existing boot media before
you install anything from here. Assume you may have to restore it. - Prefer a SEPARATE SD card or USB stick you can boot from, instead of
overwriting a working internal (eMMC) install. - Do NOT report problems with this build to the CoreELEC team or forums.
This is not their build; it is not their responsibility. Do not ask them to
support it. - I am also not offering support. If it breaks, you keep both pieces.
By downloading or using any file in this release you accept all of the above.
Install
- Clean install (recommended): flash the
*.img.gzto an SD card or USB with
balenaEtcher (or the Amlogic USB Burning Tool for eMMC), then boot from it. - In-place update: copy the
*.tarto the/storage/.updatefolder on an
existing CoreELEC install and reboot. (Back up first — see above.) - Verify your download against the SHA256 sums below before flashing.
What's changed in this update
This update follows
v22.0-samurihl-20261030200017.
It brings the build up to CoreELEC 22.0 RC2 and the matching Kodi 22, and
adds a set of fixes picked from two other projects: ce-canary (matthane's
test builds of features headed for CoreELEC) and CB1 (CroqueMr's Dolby
Vision work for LibreELEC on x86).
⚠️ Still experimental and completely unsupported. See the disclaimer above.
Back up your current install before flashing (Settings → CoreELEC → Backup).
- Lightly tested, on the Ugoos AM6B+ (S922X) only. This release carries a
lot of new upstream and picked-in code, and only a spot check was done
before release. The AM9 Pro (S905X5) was not tested at all this time. If
something misbehaves, go back to the previous release and please report it
with a debug log: your test results are what this release is for.- To go back: copy the previous release's
.tarinto/storage/.updateand
reboot, or do a clean install of that release.- Dolby Vision still requires
dovi.ko(the CE22 5.15 build) installed on
your device. It is not bundled; install it yourself as on stock CoreELEC 22.
✨ Up to date with CoreELEC 22 RC2
The build is rebased on today's CoreELEC 22 (22.0-Piers RC2) and Kodi 22.
Among the upstream fixes you get:
- No more hang when the TV rejects a mode that Kodi asks for.
- No deadlock when you stop playback during a refresh-rate switch.
- TrueHD 96 kHz dropouts fixed (Kodi mainline).
- Crash fixes: the audio engine (a stream freed while unconfigured, repeated
UI sounds), plus heap and stack overflow fixes. - Scratched discs keep playing instead of stopping at the first bad read, and
eject works during playback. Playback now stops after 1000 failed reads in a
row, so a truly unreadable disc or a lost network share ends cleanly. - SMB no longer hangs after suspend.
- Remote works right after boot even when a slow AV receiver is on CEC.
- External subtitles: several fixes from matthane.
- Kernel drivers: a crash on resume, a black screen after a CEC wake, the G12B
CEC clock, CEC transmit retries, boot-logo crashes, the AM9 Pro USB probe, and
device-tree updates for the AM9 Pro and Ugoos. - Security point releases: OpenSSH, systemd, wpa_supplicant, expat, rsync,
nghttp2, libarchive.
AM9 Pro owners: upstream now cuts USB power when the box is off or
suspended. USB drives power down, and a USB-dongle remote can't wake the
box. You can turn this off in the CoreELEC settings.
Some upstream changes are deliberately left out, because this build has its
own tested versions of the same features: upstream's new SDR-white / HDR GUI
series, its Blu-ray navigation and menu-overlay changes, its audio start-sync
changes, and its larger player-queue change (this build keeps its 16-second
queue). Dolby Vision above 60 Hz with refresh-rate multiples is held back until it
is adapted to this build's VS10 path.
✨ From ce-canary (matthane)
- Dolby Vision FEL: an FEL film no longer flashes to HDR10 for a moment at
start and after a seek. The first base-layer picture now waits for its
enhancement layer. - Dolby Vision purple: Dolby Vision no longer turns purple when playback
starts from a refresh rate the TV can't show in Dolby Vision (for example
right after a 120 Hz menu). - G12B audio clocks (Ugoos AM6B class): the audio clocks now run from the
same high-precision clock for both rate families, and the reported audio delay
includes the output FIFO. Includes the fix that keeps another output at the
right speed when an S/PDIF output closes after 44.1 kHz. - Faster 4K Blu-ray clip joins: an FFmpeg backport saves about half a second
at each UHD clip join. - VC-1: smoother VC-1 playback, and no more stale blocks (short horizontal
lines) on moving pictures. - Blu-ray library fixes (libbluray): a hang at the end of a BD-J playlist,
out-of-bounds reads, Spears & Munsil menu keys, a menu left on screen, BD-J
screen setup, and the Java runtime no longer intercepting Kodi's signals. - Audio offset add-ons see an audio track change made by a disc's own menu
right away. - DVD menus: a set of libdvdnav fixes.
- Small race, null-pointer and double mode-set fixes.
✨ From CB1 (CroqueMr)
- HDR10+ → Dolby Vision brightness: each scene's average brightness is now
estimated correctly for every HDR10+ metadata layout. Common HDR10+ titles look
the same; titles with less common metadata were converted too bright and now
look right. - Blu-ray menus without a 1-second freeze: on discs whose menus have no audio
(and on video-only files), every page change or loop froze the picture for one
second. Fixed. - Blu-ray pop-up menus stay above subtitles: subtitles that arrived while a
pop-up menu was open could draw over it, and a forced subtitle could remove the
menu (or the menu the forced subtitle). Fixed for HDMV menus. - Player Information: during playback, Alt+O (keyboard) now shows what the box
is doing: the source (codec, resolution, HDR / Dolby Vision profile, FEL/MEL),
the processing (Dolby Vision core, VS10, CMv4.0, L5, VSVDB) and the HDMI output
(mode, colour format, bit depth, Dolby Vision TV-led or HDR10). Map
PlayerDebugVideoto a remote key in Keymap Editor to use it from the couch.
No skin changes.
🛠️ Fixed in this build
- Stopping during a Dolby Vision start with L5 set to Auto no longer hangs for
half a second. - BD-J titles: a playlist stop with no stream open now releases the disc's
held events, so a Java menu can't wait forever; a stop during a BD-J title ends
the event loop at once.
Credits
This release stands on other people's work. Thank you:
- CoreELEC (CoreELEC/CoreELEC,
CoreELEC/xbmc): Portisch, matthane, afl1,
Rudi Heitbaum, Matthias Reichl, Jernej Skrabec, Christian Hewitt, Pro-me3us, CvH,
Shigeaki Asai, Peter, Chris, Óscar Villas Pazos, vpeter4, and everyone else in
RC2. - Kodi mainline (via CoreELEC's merges): 78andyp, Kel Modderman, olympia,
Garrett Brown, Chris, Arthur Liberman, ksooo, ldzhjn, Sam Nazarko, Dom Cobley,
Keith Herrington, Clément Péron, thexai, popcornmix, and many more. - ce-canary (ce-canary/canary):
matthane, for the FEL, Dolby Vision purple, G12B audio clock, VC-1, DVD,
libbluray and small fixes in this release. Inherited libbluray patch authors:
Portisch, Petri Hintukainen, Hendrik Leppkes, tanio99, Peter Vicman. - CB1 (CroqueMr/libreelec-CB1):
CroqueMr, for the HDR10+ mean-brightness estimator, the Blu-ray flush fix and
the Player Information idea. Menu-above-subtitles follows Kodi PR #30272 by
78andyp. - FFmpeg: Michael Niedermayer (HEVC stream parameters without a frame decode).
Under the hood
- Rebase: CoreELEC onto
8ecded83ba(22.0-Piers RC2), Kodi ontoba4113f0d4
(upstream force-rewrote again; rebased with--onto). Rejected upstream series
are explicit reverts on the new base, ahead of this build's own stack. - common_drivers now pinned to
cc0e6659with 9 upstream Dolby Vision / HDR /
OSD commits reverted as patches 0000a–0000i, so this build's Dolby Vision,
colour, CRTC and HDMI driver files are byte-identical to the previous release.
A new assertion guards theFLAG_USE_SINK_MIN_MAXdefault. - New patches: common_drivers 0023–0027 (ce-canary DV purple, G12B audio
clocks), media_modules 0005–0007 (VC-1, FEL first picture), libbluray 40–50
(ce-canary), ffmpeg 0004 (HEVC parameters backport). Upstream's
libbluray-04-seek-start-at-dual-layer-video-entry-pointis dropped.
Source
- CoreELEC (distro):
SamuriHL/CoreELECtagv22.0-samurihl-20261121201259 - Kodi:
SamuriHL/coreelec-xbmctagv22.0-samurihl-20261121201259
Checksums (SHA256)
27004ea78154e603f80d65b759aafca0f8f5cda83184c465ffde8c3b9228dcf0 CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261121201259.tar
05a99404cf55cff326d8d12deb6b70226189b822ed360dc711fd24f64fc9df4e CoreELEC-Amlogic-no.aarch64-22.0-Piers-samurihl-EXPERIMENTAL_20261121201259-Generic.img.gz