Install GitHub Version With WEB INSTALLER
Thank you so much to our RM Pro/Extreme Patreon supporters! Because of people like you, we are able to offer the best and most up-to-date Flipper Zero Firmware!
Supporters also get SD Card Assets zip file with extra NFC Assets such as Infrared remotes, NFC files, SubGHz files and 86 RM Pro Trained Level 50 Sm@sh Amiib0 (By RogueMaster)
- Keep Your Flipper Up To Date With PATREON membership
- PATREON for frequent compiled releases for nearly ALL updates. GitHub releases will occur monthly.
- Contact me on Discord/Patreon to RENAME your Flipper or for GIF conversion for Flipper Zero
- 🔥 PATREON ASSET PACKS AVAILABLE: ALL (For Preview Only), Android, 420, 420+18, Anime Only, Anime+420, Anime+420+18, BMO, CHERRY 18+, CyberPunk77, DBZ, Dolphin, GTA, HACKZ, MARIO, MARVEL, NoAnim, ONE PIECE, P0KEMON, Pwnagotchi, RM 18PLUS, RM SELECT, RM SELECT + 18PLUS, RM MINIMAL (default on GitHub), SAO, SCIENCE, SCIFI, SJUMP, SQUATCH, VIRUS, WATCHDOGS AND STOCK with assets updated to look like stock. Anime and RM Select builds are very large and can slow down F0.
- VIDEO PREVIEW FOR ALL ANIMATIONS
- Supporters also get SD Card Assets zip file with extra NFC Assets such as Infrared remotes, NFC files, SubGHz files and 86 RM Pro Trained Level 50 Sm@sh Amiib0 (By RogueMaster)
- We are open to PRs, suggestions and advice if you feel you need anything that has been left out. Contact me on Discord
Latest Updates - PATREON: Latest Release RM1117-1242-df1096c5-Patreon
- Last Synced/Checked OFW, changes in commits:
2026-11-17 12:42 EST - Last Synced/Checked CFW, changes in changelog:
2026-11-17 12:42 EST - Added: Keylogger v1.0 (By dagnazty)
- Updated: SigRoam Wardriving v0.9.1 (By pingequalab)
Req: ESP32 - Sub-GHz: Fix a received Nice O-Code frame being saved as if its installer code were FFFF - opening it from the list decoded the remote to nonsense instead of pointing at the Nice O-Code app, and offered to send it. Affected both the 72bit and the 112bit frames (By xMasterX)
- Updated: Seed Capturer v1.2 (By xMasterX) Can decode a saved RAW
.subfile instead of capturing over the air, and uses an external CC1101 module when one is plugged in (By xMasterX) Now supports BFT Mitto remotes on 433.92 MHz, the same way as Erreka - capture the hops and recover the Seed in qUnleashed (By xMasterX) - Updated: Flipper Lotto v1.0 (By molykima)
- Updated: BLE Beacon v1.1 (By steanlab)
Nice O-Code-New remotenow mints a serial the gate is certain to enrol, picking from the 1024 that keep the captured remote's certificate consistent instead of any of 2^28 (By xMasterX)- Updated: InfraFi v2.0 (By amd989)
- Added: Key Copier Italia v1.0 (By Torron / Maranello89)
- Added: WiFi Census v0.1.31 (By Endika)
Req: ESP32 - Added: NRF24 Tool v1.0 (By S. Terrier)
Req: NRF24L01 module - Added: Bible [BSB] v1.1 (By dpshde)
- Added: BME680 v1.2 (By Dr.Mosfet)
Req: BME680 sensor - Added: CAN-FD-HS v0.1 (By SERMA Safety and Security)
Req: SERMA CAN FD board - Added: CFS Tag Writer+ v1.4 (By BaniMun)
- Added: Debug Mode v0.5 (By Alex Dean)
- Added: Embraco Starter v1.0.0 (By Adam Gray (Expert Hub))
Req: External PWM-controlled compressor interface - Added: FastJS v1.3 (By JBlanked)
- Added: FliPort v0.3 (By FliPort)
Req: ICM42688P IMU - Added: Flipper Poser v1.0 (By mrnullone)
- Added: FlipperHTTP v1.1 (By JBlanked)
Req: ESP32 with FlipperHTTP firmware - Added: HAM v0.6 (By lumen-rot)
- Added: Knit Counter v1.0.2 (By fridgepoet)
- Added: Morse Beacon v1.0 (By jdmills)
- Added: Morse Trainer v1.0 (By Baris Mert)
- Added: Onkyo Remote v1.0 (By gergely-xyz)
- Added: Persian Calendar v1.1 (By amir)
- Added: Pet Your Dolphin v1.1 (By David White)
- Added: Roku App v1.0 (By Sifi11)
- Added: Serial Chat v1.0 (By Osman Gokce)
- Added: Smack My Dolphin Up! v1.0 (By siberianbot)
- Added: Spectre v0.1 (By rseufert)
- Added: Talk Timer v1.0 (By Manoah Ruiz Rodriguez)
- Added: Tower Defense v2.1 (By apfxtech)
- Added: Wanbo RC v1.0 (By Yuri Monteiro)
- Added: Zoom Remote v1.0 (By Manoah Ruiz Rodriguez)
- Updated: Marauder GUI v1.1 (By mel4mi)
- Updated: Key Wizard v1.3 (By Vazgen Grigoryan)
- Added: Bleepsentry v1.0 (By hdyrawan)
- Added: Grimoire v0.1 (By rseufert)
- Added: USB CD-ROM v0.1.2 (By piersroberts)
- Added: USB Floppy v0.1.3 (By piersroberts)
- OFW: NFC: Add MIFARE Classic 1K EV1 support #4480 (By MickaelBergem)
- Added: FM Radio RDS v0.1 (By victormico) Si4703 volume control and RDS station names/radio text (By victormico)
- Added: CLI-GUI Bridge v0.2 (By ranchordo) Ported to RM’s current CLI with resumable background sessions (By RogueMaster)
- Updated: Nice O-Code v2.0 (By zero-mega & xMasterX) UL remote creation and certificate encoder updates
- Updated: Bleepsentry v1.1 (By hdyrawan) Calibration prompt, RSSI scale/readout and screen-layout fixes (By hdyrawan)
- Updated: Sub-GHz RAW Edit v1.8 (By Lechnio)
- Added: Portal Putt v0.1 (By rseufert)
- Updated: Hanzi Cards v0.5 (By rseufert)
- Added: Servo Tester+ v0.5 (By Enlighten Tech)
- Added: Varta v1.0 (By mishamyte)
- Updated: Delete-dialog layout and text-box line spacing (By xMasterX)
- Updated: Varta v1.1 (By mishamyte)
- Updated: Nyx v1.2 (By at0m-b0mb)
- Updated: Dooya custom buttons (By Lechnio; ported by xMasterX)
- Added: Telecrane Control v1.1 (By nmatt0)
- Updated: Archive and file-browser icon copy, sorting, and selection fixes (By xMasterX)
- ESP Flasher: Comes with Marauder v1.20.0 (By justcallmekoko)
- Updated: FlipBIP Crypto Wallet v2.1 (By xtruan)
- Updated: Networking NFC + QR v2.0 filename conflict handling and URL validation (By DonJulve)
- Added: Tea Timer v1.0 (By igordanilov)
- Added: Pokemon Battle [GBC] v0.1 (By cycalo)
Req: Link Cable/Adaptor - Updated: RF Survey v1.3 - Cadence, Hunt and signal analysis (By tbelbek)
- Updated: WiFi Marauder v0.8.0 (By 0xchocolate & tcpassos)
- Added: SSH Runner v0.2 (By SeanChangX)
Req: ESP32-S3 + W5500 with SSH Runner firmware - Updated: RF Survey v1.3 - optional lab source maintenance; RX build unchanged (By tbelbek)
- Updated: Grimoire v0.1 - region-aware wand refusal feedback (By rseufert)
- Updated: Yulias Cats v0.8 - version and catalog documentation refresh (By rseufert)
- Updated: NW Crawl v0.4 - version and catalog documentation refresh (By rseufert)
- Updated: Step Seq v0.3 - version and catalog documentation refresh (By rseufert)
- Updated: CatDriver v1.0 - author settings, ESP32 info and GPS status updates (By EVL87)
- OFW: NFC: Fixed: Ultralight READ/WRITE now reject a starting page equal to the page count (By Kostya4ki)
- Updated: PicoPass (iClass) v1.23 (By Bettse)
- Added: Hazke v1.0 - wireframe space trading and combat (By REZOR)
- Updated: Taiko Player v0.5.1 (By ZeroNinx)
- Added: Pet Thermometer v0.3 - NTAG5/BeUno and FDX-B temperature reader (By Manawyrm)
Req: TI TMP117 - Updated: Ansonic Nice FLO false-positive rejection and CAME TWEE parcel-counter bounds check (By xMasterX)
- Updated: FlipFlash v1.0 - Fix path to lowercase (By Mushi0)
- Added: Lettercade v1.0 - Letters Rain, Snake Letters and Tennis Letters (By andreimagic)
- Updated: GameBoy Emu / FlipGB v5.1 - author emulator core, save states, RTC and display/input improvements (By D4C1-Labs & jgilchrist)
- Updated: ESP32 Gravity v1.0.1 - author scene-based companion, settings and synchronization (By chris-bc)
- Updated: CFS Tag Writer+ v1.5 - reusable spool templates, save-type chooser and template deletion (By BaniMun)
- Updated: TagTinker v2.1 (By i12bp8) Preserve saved target IDs (By bey0ne)
- Updated: Image Viewer v0.2 (By polioan) Bounded bitmap reads and corrected rendering (By B0L1V3RS)
- Updated: Sub-GHz Scheduler v3.4 (By shalebridge) Timed playlist files and on-device playlist management (By justinwlin)
- Updated: Air Stats v1.0 (By thevan4) SCD40/41 CO2 selection, readiness checks and corrected I2C wiring (By ZeroNinx)
- Updated: Hermes v1.3 (By at0m-b0mb) Release expansion UART ownership before baud detection (By jamisonderek)
- Updated: Morse Flipper v0.3.0 (By yo3gnd) Type decoded Morse over USB HID (By SoTypicalNoob)
- Updated: FlipPass v3.1 - cached KDF for launch arguments and nested Auto-Type tags (By Arckanos)
- Added: BadUSB MSC v0.1 - BadUSB scripts with isolated USB mass storage (By ZombieDolphin)
- SubGHz: KeeLoq mode 7 counter-pair pack and on-demand encoder buffer (By xMasterX)
- SubGHz: Encoder buffer bounds for CAME Atomo, Dooya, Power Smart and Somfy (By xMasterX)
- SubGHz: Allocate BinRAW capture buffers on demand and fix receiver deletion bounds (By xMasterX)
- Added: Clock LED v1.0 (RGB LED RTC Clock) (By TONYIVCZ1)
- Added: DropDetect Live v0.1 (By TheRealLuro)
Req: ICM42688P IMU - Added: SH1106 Test v0.5 (By gbhobbytech & martinbogo)
Req: SH1106 OLED - SubGHz: Receiver memory reservations and fragmentation-aware history/TX checks (By xMasterX) Adapted for extended history with live history/menu growth checks; GPS, repeater, long hashes and RAW safeguards retained.
- Updated: Sub-GHz WarDriving v0.2 - defer autosave SD writes off the decoder callback (By xMasterX) Heap reservations, history deduplication and menu bounds (By xMasterX) Retains queued payloads across row deletion/reset, bounds the backlog and drains it before exit.
- Added: Flipper Blinker v1.0 (By T3chieJack)
Req: external LED on PC3 - Added: U2F over NFC v1.0 (By asalde_le1)
- Updated: Apps list return (By mishamyte) - retain the browser while an app runs and return without rebuilding the list; suppress covered-browser scroll redraws while preserving RM JS Runner routing.
- Updated: Covered-view redraw suppression (By mishamyte) - stop covered viewports repainting the foreground, run settings/button-menu scroll timers only while entered, and explicitly refresh Bluetooth/SD icons; supersedes the local FileBrowser draw flag.
- Added: Ducobox v0.1 (By Martin Elsner) - learned Sub-GHz ventilation remote.
- SubGHz: Complete Prastel shared allocation and layout checks (By xMasterX) and Nord Ice shared encoder allocation (By xMasterX).
- SubGHz: CLI chat initializes and validates the radio before rejection cleanup (By xMasterX) Preserves settings/region checks.
- Storage: Restore UL/OFW directory-name buffer sizes for recursive removal and CLI listings (By Flipper Devices) Preserves virtual mounts, fast rename and migration.
- SubGHz: External module LED/amp control (By xMasterX) Restored in Radio Settings, saved with the other options and passed through the existing driver configuration.
- SubGHz: Complete TX rejection feedback and keep a failed send out of TX-wait on button release (By xMasterX).
- SubGHz: Complete Honeywell shared hash/serialization handlers while retaining RM 32-bit hashes (By mishamyte).
- Updated: Bible [BSB] v1.2 (By dpshde) Author adds chapter/book continuation, genre filtering and section headers, and reduces reader buffer memory.
- Updated: Infrared projector database unit test (By mishamyte) Use the shipped projectors.ir filename and register its Play/Pause buttons. UL #1199.
- Added: FN Tester v0.6.2 (By Igor Danilov)
Req: FN/FN-M fiscal drive over UART - Dev: Remove the unreachable native JavaScript test plugin and its test-only module/types; document release-mode unit-test builds (By mishamyte) The previous test plugin required four private functions unavailable to the resident test runner.
- Dev: Add the two Telcoma/Cardin EDGE capture tests (By half2me / Benjamin Tamasi) and align native Sub-GHz tests with its protocol registry; weather-station tests use their separate app.
- Sub-GHz: Nero Radio dynamic fixed-trailer capture/replay (By xMasterX)
- Added: Reaction Time Stats v1.0 (By luvrltop)
- Added: Dooya Remote v1.0 (By Lechnio)
- Updated: Flipper Suite shared UART driver, view teardown and common helpers across all 13 apps (By barkandbite) Additional runtime cleanup (By barkandbite) Shit Show Fixes (By RogueMaster)
- Updated: BLE Scanner log lifetime, teardown ordering and refresh allocations (By barkandbite)
- Updated: Evil BLE close-time cleanup and memory bounds (By barkandbite)
- Updated: Rogue AP Detector close-time cleanup and SSID bounds (By barkandbite)
- Updated: FlipperPwn WiFi status display ownership and synchronization (By barkandbite)
- Updated: NFC Fuzzer reader-frame bounds and bit-buffer writes (By barkandbite) Preallocated anomaly buffers and listener reuse (By barkandbite)
- Updated: Sub-GHz Jammer Detect hardware-error cleanup and removal of the inactive TX selector (By barkandbite)
- Updated: CCID Emulator, Ray Hunter Client, SPI Flash Dump, Sub-GHz Spectrum, HID Exfil and UART Sniff runtime cleanup (By barkandbite)
- Added: Cube Timer v0.1 (By navarr393)
- OFW: PR: BadUSB Ducky Script 3.0 core interpreter (By josaum)
- OFW: PR: BadUSB Ducky 3.0 functions and randomization (By josaum)
- OFW: PR: BadUSB Ducky 3.0 ELSE IF and DEFINE support (By josaum)
- OFW: PR: BadUSB Ducky 3.0 internal variables (By josaum)
- OFW: PR: BadUSB attack mode switching and restoration (By josaum)
- OFW: PR: BadUSB EXFIL and host keyboard lock-state support (By josaum)
- Sub-GHz: Fix the 6 test_subghz failures (By mishamyte)
- Unit Test Updates (By mishamyte)
- Updated: Reaction Time Stats fast-result visual feedback, Continue label and text positioning (By luvrltop)
- Updated: Sub Duplicate Finder v1.3.1 duplicate candidates retain byte-for-byte verification at deletion, with comparator tests (By squazaryu)
- Updated: SSH Runner v0.3 author version, changelog and status-text documentation (By SeanChangX)
- Dev: Add NFC supported-card parser load checks and synthetic Bambu Lab parser tests (By mishamyte)
- Sub-GHz: Marantec24 gap timing, Linear Delta 3 repeat/reset handling, Holtek HT12X reset and radio-faithful unit tests (By mishamyte)
- Added: BLE Clipboard v0.5.2 - authenticated BLE clipboard and macro transfer to USB keyboard/mouse, with SD snapshots (By otcan)
- OFW: PR: BadUSB scroll-change wait and EXFIL LED debug flag (By josaum)
- Added: Remote Analyzer v1.0 (By xMasterX)
- Sub-GHz: Freezer protocol, CAME TWEE false-positive filtering, per-signal Nero Radio icons, frequency analyzer last-reading selection, and RAW capture validation in Nice O-Code/Seed Capturer (By xMasterX)
- API: 88.24 - export subghz_protocol_decoder_base_get_type (By xMasterX)
- Updated: PINGEQUA RF Lab v0.5.5 (By pingequalab) (Version Only)
- Updated: Reaction Time Stats completed About screen and repeatable fast-result sound/LED feedback (By luvrltop)
- Added: PayTo Wallets v0.1 (By Rastislav Core)
- Added: Controller Ducky v1.0 (By eric-m-holub)
- Added: Super Sniffer Card v0.2 (By mishamyte)
- Fixed: Controller Ducky truncated USB subcommand handling and Super Sniffer Card oversized debug responses, logger signedness and unsupported UID lengths (RM corrections)
- Updated: GPIO Controller pin indexing and unused-slot crash checks (By Lokno; fixes by xMasterX)
- Updated: Temp Sensors Reader one-wire allocation and invalid GPIO checks (By quen0n; fixes by xMasterX)
- Updated: BLE Clipboard v0.5.3 SD initialization for saved snapshots and transfers larger than 4 KiB (By otcan)
- Sub-GHz: KeeLoq remotes that send at half the usual rate (Te 200us) are now decoded, and sent back at the rate they were received at & Hormann HSM remotes whose frame starts with seven preamble ones instead of eight are now decoded (By xMasterX)
- Added: IDentity v0.22 - NFC eID/ePassport reader with document authentication and photo display (By Dani)
- Updated: NFC/RFID Detector v1.5 precise LF frequency measurement and crystal calibration (By mfcarroll)
- Updated: T5577 v1.3 (By mishamyte)
- SubGHz: KeeLoq
CounterMode7, 8 and 9 each reproduce a DoorHan Smart clone resync pack, one per board family (whatCounterMode: 7used to send is now mode 8) (By xMasterX) - Added: FliBuddy v1.0 - Bambu Lab spool NFC reader with USB/Bluetooth sync to Bambuddy via the FliBuddy companion app (By Gennady Sokolachko)
- Updated: PC Health Remote v1.1 (By ataman-lab) Req: Backend
- Added: VaultFlipper v0.1 - Offline Bitwarden/Vaultwarden vault with PIN unlock, USB login typing and TOTP codes (By Sven Würth / its-sven)
- Added: Phantom/Hiland KeeLoq support and discriminator preservation (By xMasterX)
- Added: FAAC TM 12-bit Sub-GHz protocol and manual generation at 433/868 MHz (By xMasterX)
- Added: TM01x Cyfral/Metakom write support with parity checks and write-error feedback (By Leptopt1los) / UL integration
- Updated: StroboMeter v2.0 (By LeanderJDev)
- OFW: Archive stability improvements (By xMasterX)
- Updated: FN Tester v0.7.0 with English/Russian UI and saved language selection (By Igor Danilov)
- Updated: Tea Timer release builds omit the debug CLI test command (By igordanilov)
- UL: CLI command source separation and Bluetooth CLI source exclusion (By xMasterX)
- UL: Expose KeeLoq counter modes 8 and 9 in signal settings (By xMasterX)
- UL: Allow writing Dallas keys with a bad CRC while retaining invalid-frame write refusals; check TM01x finalize-mode coverage at compile time (By xMasterX) Report refused iButton writes before starting the worker (By xMasterX)
- Added: Claude Remote v0.1 - Bluetooth keyboard controls for Claude Code (By Petr Korobeinikov)
- Updated: InfraFi v2.0 NFC scan Left/Back handling (By amd989)
- OFW: iButton TM01x refactor, bit utilities and write-refusal notifications (By Leptopt1los)
- Updated: FliBuddy v1.0 starts on the reader screen, including first launch, and preserves existing settings (By Gennady Sokolachko)
- OFW: Complete iButton Dallas and misc-protocol writability callbacks while retaining RM blank selection (By Leptopt1los)
- Added: Loteria Zero v1.0 - Mexican Loteria caller with 54 cards and original rhymes (By databrainsco)
- Updated: IR Jammer v1.0 (By Clawzman)
- Updated: Disn3y Toolbox v0.2 (By Nathaniel.Belles)
- UL: iButton write-error feedback for disabled blanks, protocol writability check before starting the bus, and removal of obsolete can_write_id interfaces (By Leptopt1los and xMasterX)
- UL: Removed obsolete registry includes from Bluetooth and Crypto CLI commands (By xMasterX)
- OFW: Case-only file renames and filename validator initialization (By Leptopt1los)
- UL: Archive case-only rename collision handling (By xMasterX and Leptopt1los)
- Updated: Minesweeper Redux v1.7 author board-generation and solver optimizations (By squee72564)
- Updated: ProtoView v1.5 VW/Audi TPMS decoder, 125 kHz sensor wake and bounded history copies (By arthurdurlesteanu)
- Updated: Metroflip v2.1-beta.1 Santo Domingo and BIP Piemonte support, additional DESFire AIDs, Calypso ticketing dumps and Suica plugin assets (By luu176, filippo-ferrando, DIVIADAR and ry4000)
- Updated: Remote Analyzer adds Life Fido, Crypt and Crypt Lite detection (By xMasterX)
- Updated: KeeLoq mode 10 Phantom/Hiland resync and Crypt Key identification (By xMasterX)
- Updated: Sub-GHz Add Manually list sorted by remote name (By xMasterX)
- Added: Amiibo Browser v1.0 (By AzureSky)
- Added: GPS NMEA Marauder v1.6 (By ezod & xMasterX & AzureSky)
- Added: Theme Player v1.0 (By AzureSky)
- Added: DigiPet v1.0 (By AzureSky)
- UL: Sub-GHz Add Manually remembers the selected protocol (By xMasterX)
- Updated: Loteria Zero v1.1 full called-card history browsing, complete history lists and shuffle validation (By databrainsco)
- Updated: ListEM v1.5 compact menus, selected-row scrolling and generation progress with recent UID previews (By Clawzman)
- Updated: Amiibo Browser v1.0 compact About layout and refreshed screenshot (By AzureSky)
- Updated: Sub-GHz RAW Edit preserves long gap durations when cutting a capture (By Hugo-Gomez-Sanchez-01101)
- Updated: Restaurant Pager buffer bounds, writable settings storage, allocation checks and transmission error handling (By Bosiux)
- Updated: Flipper Wedge NDEF URI record decoding and prefix expansion (By omar711)
- Updated: wM-Buster Techem meter routing, heat-reading scale, water details and smoke detector status (By dixonbg)
- Updated: Servo Tester precise manual adjustment, full automatic sweep endpoints and PWM shutdown ordering (By ELynx)
- Updated: MeshCore Config worker shutdown cleanup, persistent sound/vibration/LED settings, connection feedback and logger status display (By hleserg)
- Updated: BadUSB MSC v0.1 resource cleanup, callback initialization and file-browser icon (By ZombieDolphin)
- Updated: Theme Player with 13 author-added Zelda tune files (By AzureSky)
- Updated: BLE Clipboard v0.5.4 persistent keyboard settings, desktop sync and typing pace (By otcan)
- Updated: Sub-GHz Proteco MOVER 433MHz decoding, encoding, custom buttons and Add Manually support (By dkorunic & xMasterX)
- Updated: Tesla Mod v2.17.0b6 (By hypery11)
- Updated: GPIO Controller v1.1: nonblocking drawing and input, guarded pin selection and responsive Back handling (By Lokno; fixes by mishamyte)
- Infrared: Validate universal database signals, skip unregistered names and reject empty raw timings (By mishamyte)
- GUI/API: Report unreadable folders, complete failed file-browser loads and export the optional error callback (API 88.26) (By mishamyte)
- Updated: T5577 v1.4: measure symbol classes from addressed commands and bound the complete histogram (By mishamyte)
- Added: USB PurpleCheck v0.3 (By RogerF5)
- Updated: Dooya Remote v1.2 restored to author main (By Lechnio)
- Added: Badge Wallet v1.0 (By lewisQ17)
- Added: GPIO Frequency Counter v1.0 (By lewisQ17)
- Added: IR Remote Maker v1.0 (By lewisQ17)
- Added: NFC Compare v1.0 - saved versus physical card UID comparison (By lewisQ17)
- GPIO: GPIO Logic Monitor for eight external pins (By lewisQ17)
- CFW Settings: System Info with heap, uptime and battery snapshot; reopen to refresh (By lewisQ17) - snapshot update
- BadUSB: MASS_STORAGE_MOUNT and MASS_STORAGE_UMOUNT commands for switching between HID and a disk image (By lewisQ17)
- CFW Settings: Separate Name, BLE MAC and Serial/UID spoofing with bounded UID storage (By lewisQ17)
- Fixed: CFW Settings spoofing reload use-after-free and stale BLE MAC/UID overrides (By RogueMaster)
- SubGHz: Frequency Analyzer live/last RSSI in dBm with corrected placement (By lewisQ17) - layout fix
- U2F: NFC transport with USB/NFC mode selection (By lewisQ17)
- Power: Percentage and combined timer/percentage shutdown, estimated remaining runtime and optional critical cutoff (By lewisQ17)
- NFC: Plantain card-number bounds, Type 4 Tag APDU length guard and FeliCa zero-block MAC guard (By lewisQ17)
- Added: Ham Cram v1.0 offline US amateur-radio license study and practice exams (By NicPWNs)
- Optimized: Read-only handler, pointer and UI tables made const (By lewisQ17)
- Archive: TAR/TGZ extraction with destination and path checks (By RogueMaster; upstream by lewisQ17)
- Updater: Explicit initialization of optional cleanup pointers (By RogueMaster; upstream by lewisQ17)
- RPC: Expose mounted storage in root directory listings (By RogueMaster; upstream by lewisQ17)
- BadUSB: Work-screen LED indicators for typing and button waits (By RogueMaster; upstream by lewisQ17)
- JavaScript: Per-file __filename and __dirname during load() with caller restoration (By RogueMaster; upstream by lewisQ17)
- CFW Settings: RM credits screen with upstream acknowledgments (By RogueMaster; upstream by lewisQ17)
- Optimized: CRC calculations and per-tick cached power/analyzer values (By lewisQ17)
- Memory: Explicit asset-pack initialization (By lewisQ17)
- Optimized: Read-only CLI, desktop and protocol tables; shared archive, infrared and USB definitions; smaller CAME Twee and Gallagher lookup storage (By lewisQ17)
- Desktop: Pause dolphin animation frames while the backlight is off, with RM backlight-state and timer-lifetime corrections (By lewisQ17; RM integration by RogueMaster)
- BLE: Require 16-byte encryption keys for pairing (By lewisQ17)
- NFC: Save eligible NFC-A reads as UID-only files with corrected 10-byte UID metadata (By lewisQ17; RM integration by RogueMaster)
- NFC: Reversed and decimal NFC-A UID information and reserved SmartRider concession-token handling (By lewisQ17)
- Core: Log-handler, event-flag and allocator guards with a per-device heap canary (By lewisQ17)
- SubGHz: Empty RAW progress guard and explicit TX/RX worker initialization (By lewisQ17)
- RGB Backlight: Restore configured colors after vibration stops (By lewisQ17; RM integration by RogueMaster)
- Infrared: Encoder allocation size, pre-write decoder timing bounds and signal initialization guards (By lewisQ17)
- SubGHz: POCSAG completed-message replacement (By lewisQ17)
- Optimized: Pause the desktop clock during foreground apps and reduce archive preview buffer size (By lewisQ17)
- Fixed: Archive extraction short-write comparison signedness (By RogueMaster)
- NFC: EMV short-field bounds and explicit application initialization while retaining RM length validation (By lewisQ17) - initialization follow-up
- Compress: Correct uncompressed payload length and handle malformed compressed icons (By lewisQ17; RM integration by RogueMaster)
- NFC: NTAG21x unprotected-page handling and partial ISO15693 block-status bounds (By lewisQ17)
- GUI/NFC: Empty-line and cursor-buffer bounds, truncated Classic blocks and empty Plus security levels (By lewisQ17)
- Assets: Icon frame and dimension validation, animation bubble bounds and defensive region allocation handling (By lewisQ17; RM integration by RogueMaster) - frame validation source
- Core: Semaphore release atomicity and conditional freed-memory diagnostics (By lewisQ17)
- JS/HID: Host keyboard LED state, USB disk load/eject handling and short-Back media mute (By lewisQ17; RM integration by RogueMaster)
- SubGHz: Signal Inspector capture metadata, protocol code type and Save action (By lewisQ17; RM integration by RogueMaster) - Save extension
- NFC: Expanded read-only EMV Full Info metadata (By lewisQ17)
- CLI: Keyboard modifier and Home/End handling for device input (By lewisQ17)
- Archive: Display each exact favorite path once while preserving first-occurrence order (By lewisQ17)
- Build: Scope the DWARF line-section workaround to unit-test builds (By lewisQ17)
- Added: A/C Master v0.3 multi-profile infrared air-conditioner remote (By Enlighten Tech)
- Fixed: Archive extension-table linkage for firmware and file-browser builds (By RogueMaster)
- Updated: UHF Expansion v1.8 reader-frequency settings, draft Save/Discard flow and verified persistence (By MTools Tec)
- Added: eReader v1.0 - Streaming plain-text book reader with word wrap, saved positions and two font sizes (By Daniel Baker)
- Fixed: BadUSB Usage Overflow caused by PR #4501 BadUSB Ducky Script 3.0 code changes (By RogueMaster)
- Updated: Sub-GHz RAW Edit v1.8 (By Lechnio)
- Updated: Network Defender v1.2.1 (By w84death)
- Updated: Moon Phases v1.2 (By w84death)
- Added: ULCFKey Recovery v2.3 (By rohanday3; based on ULCFKey By noproto)
- NFC: Fix third-party NFC apps reading the wrong NTAG/Ultralight pages (Weebo Wrong password on every amiibo) - the Ultralight AES fields no longer sit in the middle of
MfUltralightData(By xMasterX) - Sub-GHz: DEA Mio discriminator preservation and Advanced Add Manually discriminator/TE input; restore full-history receive feedback (By xMasterX)
- Updated: AmiiTool: add the Zelda & Loftwing name alias (By Firefox2100)
- Sub-GHz: Add Manually system list with frequency/modulation selection and protocol-sized Advanced key input (By xMasterX)
- Fixed: NFC eInk, NFC Login, NFC Magic, Passy, PicoPass, Metroflip and Saflip buffer and input bounds (By lewisQ17)
- Fixed: FlipSocial, FlipWorld, Web Crawler and FlipStore HTTP marker and JSON token bounds (By lewisQ17)
- Fixed: Flipper Wedge NDEF length checks, Pokémon Trader party-index bounds and TOTP buffer validation (By lewisQ17)
- Fixed: WiFi Marauder log-path bounds and Mayhem Marauder script JSON allocation checks (By lewisQ17)
- Fixed: UHF RFID and Simultaneous RFID Reader buffer bounds and allocation sizes; Wardriver access-point bounds and low-memory guards (By lewisQ17)
- Fixed: POCSAG message-length bounds, ProtoPirate version range validation and Cross Remote, Quac and SubGHz Remote input bounds (By lewisQ17)
- SubGHz: BelKorn protocol with 36-bit serial, unified Add Manually support and custom buttons (By xMasterX)
- SubGHz: History displays decoded system names for CAME, Nice FloR-S, Faac SLH and KeeLoq (By xMasterX)
- Remote Analyzer: Remove standalone BelGate decoder now provided by firmware and list app-specific protocols in How to use (By xMasterX)
- SubGHz: Advanced Add Manually guard-time input for Princeton and ZKTeco and fix FAAC TM generation without Guard_time (By xMasterX)
- SubGHz: Fix internal-radio CLI rx, tx and tx_from_file failing to start and add regression test (By GodKimba)
- Added: Universal TPMS Dashboard v0.3 (By Marcopiiit)
- Added: E6B Flight Computer v1.0 (By Marcopiiit)
- Added: FlipWind v1.0 (By Marcopiiit)
- Added: FuseZero v1.0 (By Marcopiiit)
- Added: Haier AC YR-HE2 v2.0 (By Marcopiiit)
- Added: IR Identifier v1.0 (By Marcopiiit)
- Added: KeyRecoveryTool v1.0 (By Marcopiiit)
- Added: MDC1200 v0.2.2beta (By Marcopiiit)
- Added: MorseTX v2.0 (By Marcopiiit)
- Added: Nissan TPMS Dashboard v1.2beta (By Marcopiiit)
- Added: RFIDduplicates v1.0 (By Marcopiiit)
- Added: RFidentifier v1.0 (By Marcopiiit)
- Added: Solar Compass v1.0 (By Marcopiiit)
- Added: TagDuplicate v1.0 (By Marcopiiit)
- Added: Tone TX v1.1 (By Marcopiiit)
- Updated: PwnPal v3.0.1 (By mrq1911) - ESP32 Pwnagotchi companion
Req: ESP32 - Updated: NFC Magic v2.4 ISO15693 gen1/gen2 support (By mfcarroll)
- Fixed: PVS-Studio warnings in Archive and NFC (By Project516)
- Updated: Ghost ESP v1.9.1 (By jaylikesbunda & Spooks4576)
Req: ESP32with Ghost ESP Firmware - OFW: Bound CLI startup waits in host test scripts (By Project516)
- Added: TV Off v1.0 (By ryanneufeld)
- Added: DrMosfetCan v1.1 (By Dr Mosfet) - GVRET USB-CAN bridge
Req: MCP2515 with 16 MHz oscillator and CAN transceiver - Added: Amiibo Emulator v1.0 (By Soap-n-Cartridge) with file handling and crypto safety fixes Scan, favorites and graphical menus (By Soap-n-Cartridge)
- Updated: DFC v1.1.1 with dfc-core v2.0.0, faster DES and chained reads, lower-memory credential loading and teardown cleanup (By cindersocket)
- Added: USB I2S Audio v1.0 (By xMasterX) - USB sound card to I2S DAC
Req: External I2S DAC - Updated: Claude Remote v0.4 (By Petr Korobeinikov)
- Updated: IDentity v0.22 - load photo decoding, document authentication, anthems and elliptic-curve routines as plugins when used (By Dani)
- Updated: eReader v1.1 - per-book bookmarks, bookmark list and hold-OK menu (By Daniel Baker)
- Updated: Sub-GHz Keystore Decryptor v1.1 - selectable factory key slots, validated decrypted entries and app-data output (By Lechnio)
- Updated: Amiibo Emulator v1.1 (By Soap-n-Cartridge)
- Added: Codex Monitor v1.4 (By Dr. Mosfet) - Codex quota and reset timers over Bluetooth or USB
- Added: IR RAW Edit v1.0 (By Lechnio) - Trim, decode and merge infrared signal files
- Added: Keilerei v1.0 (By JB) - LCD brawler with enemy waves, weapon crates and changing arenas




