Savage Wind Alpha 6: the upscaler update.
Important
No game files are included. You need your own legally obtained copy of the game, updated to version 1.9.0
(and the DLC, version 3.0, if you want it), extracted from your own Nintendo Switch. Savage Wind provides no game
files, keys, firmware, dumping or decryption tools, or instructions to obtain any of them, and it never decrypts
anything. The game code is recompiled on your machine, from your files, for your own use only: don't share it.
Respect the copyright laws of your country. This is a fan project, not affiliated with or endorsed by Nintendo.
Downloads
| File | For | Status |
|---|---|---|
SavageWind-0.6.0-alpha.6-windows.zip
| Windows 10 or later, x86-64 | Supported |
Savage_Wind-0.6.0-alpha.6-x86_64.AppImage
| Linux x86-64 with glibc 2.35 or newer (Ubuntu 22.04, Debian 12, Fedora 36, Arch, SteamOS...) | Supported |
Savage_Wind-0.6.0-alpha.6-aarch64.AppImage
| Linux on ARM64 with a Vulkan 1.3 driver | Highly experimental |
The .sig files next to them are what Savage Wind checks before it installs an update: you don't need them.
Updating to Alpha 6
From 0.5.1, 0.5.2 or 0.5.3: Savage Wind Configuration offers it: press Update. On the first start the game code
is built again for this version (a few minutes). Your game files, saves and settings stay.
From 0.5.0 or older: by hand, once: extract the zip over your old folder (Windows), or use the new AppImage (Linux).
NVIDIA DLSS: Savage Wind doesn't ship NVIDIA's library. Savage Wind Configuration downloads it from NVIDIA's own
repository on your PC. Without internet, copy nvngx_dlss.dll next to savagewind.exe.
Upscalers and graphics
- NVIDIA DLSS in Video > Upscaler, on RTX graphics cards on Windows (#602 by Yiozolm). Savage Wind doesn't
ship NVIDIA's library: Savage Wind Configuration downloads it from NVIDIA's own repository on your PC (offline:
copynvngx_dlss.dllnext tosavagewind.exe). RTX 20 and 30 cards get DLSS's CNN model and RTX 40 and later its
transformer model: left to NVIDIA's choice, the transformer cost an RTX 3060 more than DLSS saved. RTX 3060, 4K,
Savage preset at 100%: 94 fps without an upscaler, 123 with DLSS Performance.SAVAGEWIND_DLSS_PRESET=<n>picks
another model. - Native mode for FSR 3 and FSR 4: their anti-aliasing at the window's resolution (#820 by jfpaardoo).
- Render scale changes only the 3D scene: the HUD and menus stay sharp at any scale, and above 100% the menus no
longer shrink inside black bands (#835 by jfpaardoo, #764, #746). - HDR options have a page of their own under Video > Advanced options, with a RenoDX extended tone mapper,
PsychoV, live presets and an Advanced fold (#572 by EthanBlazkowicz). - Ultrawide: the pause menu, the loading screen and the start screen keep their 16:9 layout (#805).
- Gerudo Desert terrain no longer comes out as huge spikes or dark patches around Molduga and Molduking
(#855, #872, #797, #816). - Waterfall bases on GPUs without attachment feedback loops (older NVIDIA, Intel, older AMD) (#848, #868
by jfpaardoo). - Frame generation while riding: the horse and the Master Cycle Zero no longer go back and forth in the
generated frames. - The performance overlay (F10) names DLSS when it is the upscaler.
Performance
- A faster build: the release runtime is built with profile-guided optimisation and ThinLTO (#801 by
Fayberr). RTX 3060 and a Ryzen 5 5600X, 1080p: Kakariko with FSR 3 Quality from 106 to 118 fps, the Central tower
from 174 to 187. - FSR 3 and DLSS cost fewer frames where the CPU is the limit: draws without motion of their own send less to the
GPU, and DLSS and FSR 3 frame generation are recorded on the recorder thread (#825 by jfpaardoo). Playing at
1080p (camera turning), FSR 3 and DLSS now match or beat no upscaler: Kakariko 112 / 111 fps against 110. - Fewer first-time stutters: 11,615 pipelines are prepared before you play (Alpha 5: 3,993), from tours of every
region with every graphics option. Problem reports now carry your pipeline list, so the next versions can prepare
the ones you met too. - Frame drops after long sessions or fast travel that came with 0.5.3's particle fix (#815).
- Less video memory held: blocks of 64 MB instead of 256 MB, about 230 MB less in a short session (on AMD's
Windows driver and integrated GPUs this is RAM too).SAVAGEWIND_VRAM_BLOCK_MB=<n>sets another size. - A pass's opening clear is folded into how the pass starts (#803 by Dgmtnz).
- AMD FSR 3 and FSR 4 upscaling are back in Video > Upscaler. They were held back in Alpha 5 because they ran
slower than native where the CPU was the limit; with the changes below they gain. RTX 3060 and a Ryzen 5 5600X,
1440p, Savage preset at 100% render scale, FSR 3 Quality over native: Great Plateau 106 / 102 fps, Kakariko
106 / 88, Korok Forest 67 / 40.SAVAGEWIND_FSR3=0hides them. - FSR 3, FSR 4 and TAA cost the CPU much less: their motion vectors are worked out on a thread of their own
instead of the thread that translates the game's drawing, every scene draw uses one motion program, and FSR 3 is
dispatched by the recorder thread. RTX 3060 and a Ryzen 5 5600X, Great Plateau, uncapped, 1440p, where the CPU is
the limit: FSR 3 Quality went from 101 to 119 fps (native 130). CPUs with fewer than 6 logical processors keep
the work on the translating thread. - TAA is a single pass: about 0.5 ms of GPU time at 1440p instead of 2.5 ms (same PC: 104 to 122 fps at 1440p;
with the Savage preset, 150% render scale, 54 to 71 fps, SMAA 77). The image is a little softer in motion than
before;SAVAGEWIND_TAA=fullbrings the old seven passes back. - Frame generation with no frame limit no longer lowers the frame rate: its two presents per game frame are
paced on a thread of their own instead of holding the thread that translates the game's drawing. Same PC, Savage
preset at 100% render scale, 1440p, presented frames per second without frame generation / with it before / with it
now: Great Plateau 102 / 47 / 125, Kakariko 88 / 48 / 116, Korok Forest 40 / 29 / 66. - Shadow resolution follows FSR 3, FSR 4 and DLSS: with one of them on, shadow maps above the console's size are
made smaller by the upscaler mode's factor (Savage at Quality: 5440 instead of 8192), the same shadow detail per
rendered pixel. Where shadows were most of the frame the upscaler gained nothing (Korok Forest, FSR 3 Quality:
41 to 67 fps, native 40).SAVAGEWIND_SHADOW_FOLLOW=0keeps the setting's size. - Ultra Performance with FSR 3, FSR 4 or DLSS needs a 4K window: below that it rendered a third of the window on
each side (853 x 480 at 1440p) and the whole image came out blurred. It is greyed there, and a stored Ultra
Performance runs as Performance. FSR 1 keeps it at any size.
Options and menus
- Cheats tab: items by category from a dropdown (critters and fairies included, #834 by jfpaardoo), and an
exact rupee count (#821 by jfpaardoo). Weather is a dropdown too. - Dialogue text speed (#678 by jfpaardoo) and menu cursor speed (#833 by jfpaardoo) options.
- HUD size Off hides the HUD, hearts included, while you play (#804 by jfpaardoo).
- Menus wrap around with the controller (#742 by SeveX).
- A custom save folder in the settings and the start screen (#673 by generalpooria).
- Discord Rich Presence (Options > Gameplay, off by default): where you are in Hyrule on your Discord profile, with
place names read from your own game files (#680 by Eyeffect). - Xbox controller page: callout lines end on their buttons, and a button swaps A and B (#795 by gangg111).
- Turkish letters in the start screen and menus (#827 by jfpaardoo).
- Voice language plays the overlay folder's files of the chosen language (#819 by leonardo-spy).
- RecompLauncher: Savage Wind can be set up from it (#736 by Xarishark).
- New guides: Cheats and assists (assists, cheats, the teleport and the amiibo
reader) and Teleport places, every placetpknows.
Gyro
The gyro reports are gathered on #136; please test your
controller and post there.
- Sensitivity and inversion turn the aim, however the controller is held: they act on left / right about gravity
and on up / down, not on the controller's own axes. Held upright (a handheld, the Steam Deck), "Invert left and
right" did nothing, "Invert up and down" flipped both, and the sensitivity only changed up and down. - Vertical motion sensitivity and Lean to turn (tilting the controller like a steering wheel also turns the
aim) in Options > Controls. - Shrine tilt puzzles follow the controller as it is held, whatever the sensitivity and inversion.
- Controllers polled faster than their sensor (a DualSense at 1000-8000 Hz, some that pass for one): each repeated
report turned the aim again, so it ran off on its own (#759). - The same controller seen twice (DS4Windows, DSX or Handheld Companion beside the real one): the gyro stays on
the real controller instead of following whichever of the two was pressed last. - Steam Input: the controller it hides behind its virtual gamepad (DualSense, DualShock 4, Switch Pro...) is opened
for its gyro, so motion works with Steam Input on. Valve's own controllers stay with Steam (the Deck already reads
its own sensors);SAVAGEWIND_STEAM_SENSORS=0turns this off. - DSU servers on Windows too (DS4Windows, BetterJoy, Handheld Companion for the ROG Ally, Legion Go and others,
SteamControllerDSU): at 127.0.0.1:26760 when the controller has no gyro, nothing to set up.motion_dsu_axesin
savagewind.inisets right a server that sends its axes in another order or sign ("pitch roll -yaw"). A DSU server
that answers also comes before the sensor SDL lends a handheld's gamepad with no data rate, which stalls on the ROG
Ally (#860 by uzuki-P). - PC handhelds' own sensors when Windows shows them (through SDL), if nothing else gives motion.
- Linux handhelds under InputPlumber (its virtual Steam Deck controller) read like the Deck.
- Options > Controls > Motion source: Automatic, Controller, DSU server or Off; its description says where the
motion comes from right now, or why there is none. - The sticks tilt a shrine apparatus with any controller once pushed past half way (a gyro lying still, a handheld
on its dock); R3 gives it back to the gyro.
Accessibility
- Colour vision for colour-blind players, the first rows of Options > Accessibility: Protanopia, Deuteranopia or
Tritanopia shifts the colours of the whole picture, HUD and menus included, so colours that look alike come apart
(a red Chuchu from a green one, the stamina wheel running out). Correction strength goes from 10% to 100%. It
works in HDR too, costs no extra pass, and leaves the Savage Wind menu and the camera rune's photos as they are.
More in Cheats and assists.
Fixes
- Crash using the Sheikah Slate in Zora's Domain and elsewhere: a stale actor is checked before it's read
(#873, #874 by jfpaardoo). - Black or missing sky on AMD cards (#359, #665).
- The opening cutscene's walk keeps the console's pace at high frame rates (#364).
- Particles stretched across the screen for a frame with the GPU overlap (#629).
- 1366x768 and similar sizes render 1:1 instead of being resampled (#770, #802 by jfpaardoo).
- Rebinding a menu row no longer moves gameplay actions (#608, #642 by jfpaardoo), and keyboard Jump and
Sprint keep their keys when the game's jump controls are swapped (#798, #822 by jfpaardoo). - SW Update leaves launcher installs and other programs' AppImages alone (#677 by devall96).
- Water drawn transparent where a new image was read before its clear finished
(#649, by jfpaardoo). - Bluetooth controllers (DualSense on Windows): vibration no longer stalls input; it runs on a thread of its own
(#730, by jfpaardoo). - Game files folder on Linux without a working file dialog: the error is shown and the path can be typed in
(#724, by jfpaardoo). - Stutter while pipelines were linked (#591, by jfpaardoo).
- Hybrid CPUs (Intel 12th gen and later): every logical processor is kept, and the game's critical threads run at a
higher priority (#639, by jfpaardoo). - Refresh rate: the monitor's real refresh rate is detected, and higher-Hz display modes are picked
(#623, by jfpaardoo). - Video > Haze keeps to 75 % or more: lower values turned the picture teal (by devall96).
- Taller windows (16:10 and others) with Fill wide screens: the HUD, dialogue, pause menu, title screen and world map
keep their layout (by sabeliam). - Keyboard on horseback: W with A or D steers without speeding forward
(#290, by rvsting). - Chinese and Korean text showed Japanese glyphs, blank boxes or
?: the game's Chinese and Korean shared fonts
were filled with the Japanese Standard font, which has no hanzi or hangul. They now load a CJK font —
SAVAGEWIND_CJK_FONT, or a TrueType one installed on the system (Microsoft YaHei / SimSun for Chinese, Malgun
Gothic for Korean, PingFang, WenQuanYi…) — and the menus' CJK fallback also acceptsSAVAGEWIND_CJK_FONT, a font
in the data folder'sfonts/, and more system paths (fonts/README.md).
Found a bug?
Read the FAQ first, then open a bug report with savagewind.log, or make one zip with Options > Problem report (it now carries your pipeline list, so future versions prepare those pipelines too). If an update fails, SW Update.log in the Savage Wind folder says why.
Thanks
To everyone who sent code this round: Yiozolm (DLSS), Fayberr (the faster build), jfpaardoo (a long list of fixes and options), uzuki-P, EthanBlazkowicz, Eyeffect, generalpooria, SeveX, gangg111, Dgmtnz, leonardo-spy, jcleng, Xarishark and devall96. Thanks also to everyone who reported bugs with logs, saves and videos, and to the testers who checked the AMD builds.
This release was made almost entirely with AI (Anthropic's Claude, through Claude Code), directed, tested and
reviewed by a human.
SHA-256
9bfc05217ed7e69001e02dee7ae9a6070a23b68cfbf946f23727f0767d4c28f8 SavageWind-0.6.0-alpha.6-windows.zip
4201a160ef2e8c20eb6871786fea3ab0ee69af57a58ed2b3ee48b54a85ad086f Savage_Wind-0.6.0-alpha.6-aarch64.AppImage
b063116f5ee57515ebbcad12aa276b194a8e349bb44d507ced8417df4b6d8fd7 Savage_Wind-0.6.0-alpha.6-x86_64.AppImage