github RetroGFX/UnofficialOS 20250829

6 days ago

This release of UnofficialOS brings new and updated cores and emulators, several bug fixes, and updated graphics packages.

New Cores

  • bsnes-mercury-accuracy - SNES/SFC
  • bsnes-mercury-balanced - SNES/SFC
  • doublecherrygb - GB/GBC
  • melonds-ds - NDS
  • wasm4 - Fantasy Console
  • geolith - NEOGEO (all units except x86)
  • Play! - PS2 (x86)

Graphic Driver Updates

  • SDL2 - 2.32.8
  • glslang - 15.1.0
  • vulkan-headers/loader/tools - 1.4.317
  • spirv-headers/tools
  • Mesa - 24.3.4
  • libdrm - 2.4.125
  • wayland-protocols - 1.44

Bug Fixes

  • Fixed RK3399 (rg552) controls
  • Patched RK3326/RK3326-CLONE for Moonlight and Hardware/Suspend options in ES
  • Fixed Hypseus-Singe controller detection issues
  • X86 broken emus seem fixed, but only the gui was tested
  • Portmaster compatibility is way better then before, on mainline units especially
  • Bumped meson and various build fixes (setenv/device-root related)

Installation

Fresh Install

  1. Download the proper *.img.gz for your device.
  2. Extract the .img and flash the image to your microSD card using your favorite image writing tool (Balena Etcher, Raspberry Pi Imager, Win32 Disk Imager, dd etc.)

Installation Image Downloads

Device/Platform Install Image
Anbernic Win600, AOKZOE A1 PRO, AYANEO 2/2S/AIR/PRO/PLUS, Atari VCS, Ayn Loki Zero/Max, GPD Win4/Max2 AMD64
Anbernic 351P/V/M/MP, Hardkernel Odroid Go Advance/Super, Powkiddy RGB10/RGB20S/V10, Magicx XU10 RK3326
BatleXP G350, GameConsole R33S/R35S/R36S, Kinhank K36, Clones These Units Must Follow Wiki Install Instructions RK3326-CLONE
Anbernic 353P/PS/V/VS/M/RG503, Powkiddy RGB10 Max 3/RGB20 Pro/RGB30/RK2023 RK3566-BSP
Powkiddy X55 RK3566-BSP-X55
Anbernic RG552 RK3399
Gameforce Ace, Orange Pi 5, Radxa Rock 5b, Indiedroid Nova (must set dtb in extlinux.conf) RK3588
Hardkernel Odroid Go Ultra, Powkiddy RGB10 Max 3 Pro S922X-Odroid_GOU
Hardkernel Odroid N2 S922X-Odroid_N2
Hardkernel Odroid N2L S922X-Odroid_N2L

Upgrading Over the Air (OTA)

If your device has access to the internet you can update UnofficialOS directly from EmulationStation.

  1. In EmulationStation open the main menu by pressing the "Start" button on your controller.
  2. Select System Settings
  3. Scroll to the System Update header and select Start Update

Upgrading Manually

If you device does not have access to the internet you can still update manually

  1. Download the latest update (.tar) of UnofficialOS for your device from below or the releases page.
    • Make sure to download the correct .tar file for your device. For example; if you are installing UnofficialOS on a RG351P you would download the UnofficialOS-RK3326 file.
    • If you have any questions you can check the Device Support section to confirm which .tar you should download for your specific device.
  2. Copy the update to your device's update share.
    • via SCP to /storage/.update
    • via Samba to "update"
  3. Reboot the device, and the update will begin automatically.

Update Package Downloads

Device/Platform Update Package
Anbernic Win600, AOKZOE A1 PRO, AYANEO 2/2S/AIR/PRO/PLUS, Atari VCS, Ayn Loki Zero/Max, GPD Win4/Max2 AMD64
Anbernic 351P/V/M/MP, Hardkernel Odroid Go Advance/Super, Powkiddy RGB10/RGB20S/V10, Magicx XU10 RK3326
BatleXP G350, GameConsole R33S/R35S/R36S, Kinhank K36, Clone units RK3326-CLONE
Anbernic 353P/PS/V/VS/M/RG503, Powkiddy RGB10 Max 3/RGB20 Pro/RGB30/RK2023 RK3566-BSP
Powkiddy X55 RK3566-BSP-X55
Anbernic RG552 RK3399
Gameforce Ace, Orange Pi 5, Radxa Rock 5b, Indiedroid Nova (must set dtb in extlinux.conf) RK3588
Hardkernel Odroid Go Ultra/N2/N2L, Powkiddy RGB10 Max 3 Pro S922X

IMPORTANT Known Bugs/Issues

Clone Devices With Single Sticks

Right now there are issues with single stick units, we are working to fix this while we wait for our development units to arrive.

Powkiddy RGB20 Pro and Clones

Currently there are no leds working when uOS is running. Charging led works if the unit is powered off. We are working to fix this.

Powkiddy X55

This device has a few known issues.

  1. Charge the unit while its turned on, not while its powered off or sleeping.
  2. Plugging the power cable in with the unit off causes it to boot. This is normal right now for the unit to charge.
  3. Powering down fully for more then a few minutes at a time resets the battery meter. This IS NOT drain, its a bad meter reading.
  4. And last, sleeping the unit breaks sound.

What I have been doing currently is charging the unit to 100%, sleeping the unit when not in use, then I'll wake it and reboot when I want to use it. It still has very good battery life when sleeping, as I only lose between 5% and 10% battery daily. Not ideal I know, I'm working towards a fix.

Odroid Go Advance

There is currently hotkey issues with this unit, specifically with PortMaster. Ports require a hard shutdown (not recommended).

Working for fixes on all mentioned issues and bugs. Please report bugs/issues to the uOS discord here.

Changelog

The commits and changes can be viewed here in the pull request for this release.

Donate

Love this project? Please consider supporting us on Ko-Fi

Don't miss a new UnofficialOS release

NewReleases is sending notifications on new releases.