What's new
- When a controller is connected but Controllers is Off, the stream says so once, as it starts or when the first controller connects during it, so a controller that does nothing on the PC is no longer a mystery. On desktop it also names where Controllers was turned off: Settings, a profile, this PC or this game.
- A custom resolution, the screen size avoiding the camera cutout and the screen's lower resolutions keep their size during the stream: automatic quality no longer raises them to the screen's resolution, and a fold or split screen no longer resizes them.
- The stream menu shows the stream's current resolution after it changed during the stream.
- When the video decoder freezes with the chipset low-latency mode and a reset does not bring it back, the stream now goes on without that mode instead of ending with a decoder error. Later streams start that decoder without it until the app or Android is updated.
- On phones without Android's window blur, a dialog opened in Settings or another of the app's screens no longer leaves a dark bar on the blurred page where the row you tapped was. The page behind the dialog stays evenly blurred.
- Why did my stream stutter? no longer counts a frame toward Bursts when the PC's own timing report for it shows the PC sent it that much later, for example after a slower encode, a wait for its turn or slower sending after a loss. Frames the network held back still count.
- Why did my stream stutter? words Bursts as frames arriving bunched together, and says that the Host finding measures the PC from the frame to its last packet sent, waiting and sending included, not only encoding.
- Full color range moved from Debug to Display & image, under Image, on Android and desktop. It keeps its value.
- When the video decoder keeps failing, Nightjar asks the PC for a fresh picture a few times a second instead of with every frame, so a failing decoder no longer floods the network.
- Lower bitrate is one setting with three choices: The PC decides, Lower it sooner and Never: keep my bitrate. When the network is busy is now part of Lower it sooner. Your earlier choice carries over, also for each PC, game and profile: if this device never lowered the bitrate itself, the PC still decides.
- While the game buttons from Controls for this game are shown, the modern on-screen controller no longer ignores every touch, and it steps aside while those buttons are moved. While game buttons are shown, the stream screen no longer lays itself out again on every frame.
- One on-screen controller: the classic controller and the Controller style setting are gone. A classic layout is carried over the first time the controls appear, with each control's place, size and opacity, face buttons you had moved apart as separate buttons, and the buttons the Nintendo layout sent; if you had picked Modern, your layouts stay as they are.
- With the Steam Controller controls on, the on-screen sticks send stick touch while a finger is on them.
- Split screen: a stream started from a shortcut or a frontend keeps its pane when it comes back after the screen was off or reconnects, instead of closing split screen without a stream.
- Steam Controller controls no longer make the PC pick a PlayStation controller, which some games cannot see. On a PC that does not turn them into a Steam Controller, they do nothing and the rest of the controller works as usual.
- A tap on an on-screen Steam Controller trackpad now clicks that pad on the PC, as pressing the real pad does; a drag or a long press still only moves.
- On-screen triggers keep their full-pull click on a PC that turns the controls into a Steam Controller.
- Tell the PC about this device's network is one switch: if an earlier version had only one of its two parts turned off (Wi-Fi or link speed), both are now off, as the switch showed.
- The Temporal, Snapdragon (SGSR 2) upscaling choice is gone on Android and desktop: it looked softer than SGSR at several times the GPU work. If you had it set, SGSR is used now.
- With Lower refresh rate off, Smoothest video and Balanced with FPS limit ask for the screen's top refresh rate where the frame rate divides it evenly: a 60 FPS stream on a 120 Hz screen asks for 120 Hz instead of dropping the screen to 60 Hz.
- With VRR off, on a screen at 2 to 4 times the frame rate, Smoothest video and Balanced with FPS limit hold a frame that comes early for its turn, to keep frames evenly paced, instead of showing it at the next refresh; this can add up to a frame of delay.
- On a TV, Home's grid and list views keep a selected game whole below the header, its highlight included, and bring a section's title back with its first row.
- No dark strip flashes under TV Home's header while the list scrolls.
- Up after Down on Home returns to the game you came from, also from a list line to the Continue playing row.
- Up and Down in the stream menu play the selection sound, as Left and Right do.
- A TV remote's Back, and a handheld's Back set to open the stream menu, close the system keyboard during a stream. Before, Back opened the stream menu and the keyboard came back each time the menu closed.
- The stream menu's Keyboard tile (Y) closes the system keyboard when it was open, instead of opening it again.
- On the PC keyboard, Up from the top row selects the close button, so a remote or controller can close it with OK as well as with Back or B.
- Vibration is one row with Off as its first choice (Off, Subtle, Standard, Strong) on Android and desktop; Trackpad acceleration (Off, Gentle, Medium, Strong) and Glide after a flick (Off, Short, Medium, Long) are one row each on Android. Your earlier choices carry over: a switch that was off becomes Off, and one that was on keeps its strength.
- On desktop, V-Sync and Fractional V-Sync are one row: V-Sync is Off, On, or On, even cadence. Your earlier choices carry over.
- The connection log no longer reports "link 0 Mbps" on Wi-Fi: it gives the adapter's rate and says that it is not used as the link speed on a wireless route.
- On macOS, the Borderless window mode and the fullscreen shortcut now cover the whole screen of a MacBook with a notch, including the strip beside the camera, so the stream is no longer shrunk below it. A fullscreen Nightjar window no longer gets a Space of its own, and the green button of its window zooms it instead of making it fullscreen.
- On macOS, hardware video decoding now hands the Metal renderer pictures made for Metal instead of OpenGL-compatible ones the app never used.
Tested. Before the tag, release candidates built from this release's code were streamed from a laptop with Radeon 780M graphics running Rubylight 6.2.0's candidate to desktop Nightjar on a Windows PC: HEVC at 30 Mbps and PyroWave at 150 Mbps at 1080p and 120 fps showed 74.6 and 77.1 fps, against 77.9 and 75.7 fps with 6.1.0 on both sides. On a handheld, the release-signed Android candidate installed over Nightjar 6.0.0, kept both paired PCs and opened Settings without a crash.
The APKs are signed by CI with the Nightjar release key; the Windows installers and nightjar.exe are signed by Ramazan Kara (Certum open-source code signing certificate); the other desktop packages (Linux .deb, .rpm, AppImage, Flatpak and tar.gz; macOS zip with an ad-hoc signature, not notarized) are not signed. SHA-256 hashes of everything are in SHA256SUMS-6.2.0.txt.