Nightjar 6.0.0
Nightjar 6.0.0 is a major release, and a lot happened since 5.0.0: it covers everything from 5.0.1 to 5.10.0 and a full round of new work. Variable refresh rate became real VRR, with each picture shown when the game drew it, tear-free on Windows and one setting to pick. Balanced pacing now shows one frame per refresh on Android, and Fractional V-Sync keeps every frame for the same number of refreshes. You can play over the internet without port forwarding, join a game another of your devices plays, and now invite a friend with one link. Frame generation on the PC turns on from a game's menu, Console mode opens straight into your games, and Nightjar runs natively on Windows on ARM. Version 6 matches the host: Nightjar 6.0.0 comes with Rubylight 6.0.0. MacOS Clients now support MetalFX thanks to @chakib-belgaid
Highlights since 5.0
- Real VRR. With Variable refresh rate on, each picture is shown at the time the game drew it, so a G-Sync, FreeSync or adaptive-refresh screen refreshes in step with the game, not the network. It is tear-free on Windows, its delay is sized from how your frames arrive, and it is one setting: Off, On or Fastest.
- Even frames. Balanced shows one frame per refresh on Android: on a Retroid Pocket 6 at 120 fps on a 120 Hz screen, 7.7% of refreshes were off the expected one before, 0.10% after. Fractional V-Sync keeps a 60 fps stream even on a 120 Hz screen, and with a Rubylight PC each frame is captured to arrive just before your screen refreshes.
- Play over the internet, with friends. Reach your PC from anywhere without port forwarding, join the game another of your devices plays as its guest, and, new in 6.0.0, send a friend a link from Guests in the stream menu: their Nightjar joins your game as a guest without a PIN.
- Frame generation from the couch. With a Rubylight PC that offers it and Host control for the device, a game's Frame generation entry turns the PC's frame generation on and off, and says before any try why a game can't have it.
- Console mode and Recommended settings. Nightjar can open straight into your games, full screen, for a controller or a remote. Settings start with Recommended, Controls, Audio and App, a Light theme joins the dark one, and with your own SteamGridDB and IGDB keys games get covers and facts.
- More places to play. A native Windows on ARM build, moonlight-qt's command line on Windows and Linux, PyroWave 4:4:4, jumbo video packets on a 9000-byte wired network, and new in 6.0.0, MetalFX upscaling on the Mac and GPU PyroWave decoding on Apple silicon.
- Controls your way. Gyroscope mapping per controller, and new in 6.0.0, modern on-screen controls with a pointer touchpad, Xbox, PlayStation or Nintendo glyphs, presets and a layout per orientation.
The sections below list what is new since 5.10.0; the earlier releases each have their own notes.
Play over the internet
- Invite a friend over the internet: Guests in the stream menu makes a link to share. A friend's Nightjar opens it, or takes it pasted under Add PC, and joins your game as a guest without a PIN or port forwarding.
- An invite that names a PC already in your list is refused before anything is sent, so the invite is not used up and the listed PC keeps its pairing and addresses.
- Nightjar no longer asks to pair again when another program or PC answers in your PC's place, such as a second streaming app on the same ports or a device that took the PC's old address. The PC shows as unavailable with the reason, and its pairing is kept.
- Nightjar no longer asks to pair again when your PC comes back at a new address after a reboot, an update or a wake.
Settings and Home
- Settings list four sections first: Recommended, Controls, Audio and App. More settings unfolds the rest in place and stays the way you left it. No setting changed.
- More settings stays open or closed across restarts.
- The HDR row shows what the stream does. A fresh install reads Off because the stream is SDR until HDR is chosen; it reads Auto once HDR streams. Auto is still the recommended choice, and a pick in another Recommended row no longer turns HDR on or off.
- A Recommended choice applies when you tap it, even if it is the choice the row last remembered, and the row's value always matches the settings behind it.
- The Console mode switch follows "When Nightjar opens" as soon as you change it on the same screen.
- After the first PC is paired, Home shows once what the automatic settings use with it.
- A game's page sits on the game's own backdrop: a sheet under the cover on a phone held upright, Home's hero as a page held sideways.
- Interface layout set back from TV to Automatic or Handheld shows the status and navigation bars again at once.
Controls
- The modern on-screen controller gains a pointer touchpad that moves the mouse or the camera, with tap, two-finger right-click and two-finger scroll.
- Choose Xbox, PlayStation or Nintendo button glyphs, apply a control preset, and keep a separate layout for each orientation.
- On-screen controls now hide while a controller is connected and return when it leaves; Only L3/R3 and on-screen controls as their own player keep them.
- The classic on-screen layout you arranged is carried over once to the modern controls, so they start roughly where you had them.
- The controller test shows the device's own motion sensors for a controller without any, as a stream uses them when Use device motion sensors is on.
- Rumble no longer restarts an old level after a pause, and a new controller in a slot starts silent.
- Controllers beyond the number the PC takes are refused with "This PC takes N controllers", still work in Nightjar's own menus, and get a slot when one is freed.
- A key or button release is no longer lost when the input queue is full, so the PC no longer sees a key or button stuck down.
- A slow trackpad scroll is no longer lost.
Streaming and video
- PyroWave warns when the link cannot carry its rate. At 4K120 on Wi-Fi it asks for 1493 Mbps; that may be more than the link carries, and the notice suggests a lower resolution or frame rate, or HEVC/AV1. A chosen rate below the level where the project's test scenes kept detail gets its own warning, and the stream still starts.
- PyroWave: when the decoder can't keep up and keeps skipping frames, the stream says so and what to lower.
- A Temporal upscaler that cannot keep up now falls back to SGSR while the stream keeps upscaling, instead of turning upscaling off and restarting the decoder.
- Snapdragon GPU driver: when a custom driver such as Turnip falls back to the system driver, Nightjar now says why: the driver library did not load, it is not an Android Vulkan driver, it did not start Vulkan, it found no GPU it supports on this phone, or it lacks features PyroWave needs. The reason shows in the driver settings and the stream's GPU line, and the problem report's log names it, with the system's message for a library that did not load, such as a library the driver needs that this phone lacks.
- Fractional V-Sync now gives each held picture to the display just after the refresh that opens its turn, with the PC timing its frames to the same point, so pictures keep the cadence you chose instead of racing the refresh.
- On Windows the picture's colour now sits on the pixels the PC gave it to: Nightjar drew it half a pixel to the right of where the stream puts it, which left coloured fringes on fine text and edges.
- Streams pace at the display's refresh rate only when the display reports one, so a faster panel is no longer held to 60 frames a second.
- Changing only the frame rate in the stream menu now takes effect, and stays off with a message when the PC does not apply it.
- An automatic reconnect keeps the packet size the running stream asked for instead of testing jumbo packets against a PC that already runs it, and goes back to normal packets when the network changed under the stream; a manual resume of a running game still tests the path as before.
- Linux and macOS: a PyroWave stream at another resolution than the display no longer comes out darker or brighter. A picture the display scales is converted first and then scaled, as on Windows since 5.9.0.
macOS
- macOS: MetalFX is a new Upscaling choice on Macs whose GPU supports it (macOS 13 or later). It enlarges hardware-decoded SDR video with Apple's spatial scaler and adds a few milliseconds of delay; the overlay says what keeps it off for a stream. @@chakib-belgaid
- macOS: PyroWave can decode on the GPU on Apple silicon Macs with macOS 26 or later; turn it on with PyroWave decoder in Settings. Other Macs decode on the processor, and the stream says why.
- macOS: scrolling follows the system's natural scrolling setting, in the launcher and in a stream; Linux Wayland now follows it too.
- macOS: the Debug setting VideoToolbox recovery (off by default) repairs a lost frame without waiting for a keyframe.
Android TV
- Android TV: the cards Nightjar adds to the home screen's channel show the game's cover again, and a game without a cover shows its title, instead of an empty grey card.
Fixes
- A game's page now waits while it starts a game or wakes the PC, instead of cancelling when you turn the device.
- A PC's game library opens from its saved copy without reading it on the UI thread, so the first paint no longer waits for a large library.
- The PC list no longer reads each PC's stored game library on the UI thread, so the list stays smooth with large libraries.
- The PC list no longer stalls while it republishes launcher shortcuts after the screen returns.
- A PC that a poll just reached no longer shows Offline because a network change arrived late.
- A failed settings or PC-list save is now told to you, with the folder Nightjar could not write to, instead of reverting silently at the next start.
- A settings, identity or PC list file Nightjar cannot read is kept as it is, with a copy beside it where its contents can still be read, instead of being replaced by defaults or a new pairing key.
- The first-run page says why the pairing key cannot be read instead of waiting for one.
- A game you start right after a stream no longer begins before the previous stream has finished ending.
- Quitting or reconnecting while a stream ends waits for its decoder and audio threads before the window and its GPU device go, so the exit no longer races them.
- Nightjar lets the screen sleep while no stream runs. It keeps the screen awake during a stream, and for 5 minutes after a stream or after controller input in Nightjar's menus, because the desktop does not count controller input as activity. Before, it kept the screen on for as long as Nightjar was open.
Tested. A 60-second stream from this release's source on a Retroid Pocket 6 at 120 fps on its 120 Hz screen showed 3205 frames, no dropped frames, no gap over 100 ms and two over 25 ms, the fewest of our release runs; the median time from a frame's arrival to its display was 2.8 ms.