github RamazanKara/Rubylight v6.0.1
Rubylight 6.0.1

2 hours ago

Windows game streaming, written in Rust. Built for Radeon and NVIDIA. Made for Moonlight.

Download Windows x64 installer · Portable ZIP

New in 6.0.1

Rubylight 6.0.1 is a release for steadier streams: a game that sets its own display mode no longer stutters under the automatic frame limit, lost packets in a menu no longer halve the bitrate, and error correction keeps its percentage unless you ask it to adapt. It comes with Nightjar 6.0.1.

  • A game that sets its own display mode no longer stutters every few seconds. A game in exclusive fullscreen can switch the stream's virtual display from the fast mode Rubylight gives it to its own, often the stream's rate. Rubylight's automatic frame limit then ran at the same rate as the display, and each time the two drifted across each other every other frame was shown twice for a second or two. The automatic limit now switches off whenever the stream's display refreshes at less than one and a half times the limit, so the display's own refresh paces the game, and comes back when the display is fast again. A limit you asked for with "Limit every stream" stays. The host log says when the display changes its refresh rate.
  • Lost packets in a menu no longer halve the bitrate. Rubylight lowers the bitrate when frames are lost that error correction cannot repair. A menu or a calm scene sends a fraction of the stream's bitrate, so loss there is not the bitrate's doing, yet the bitrate was halved, met the game when the picture moved again and climbed back in steps. Such a cut is now held back while it would not lower what is sent. Loss that goes on, and loss around a large frame, still lower the bitrate.
  • Congestion control no longer collapses the bitrate on a clean link. With "Congestion control" on, a still picture, a menu or a light scene sends far less than the stream's bitrate. A moment of Wi-Fi jitter was then read as a full link, the bitrate was cut to what that light picture needed, and it could take up to 30 seconds to return when the picture got busy. A stream that sends far below its rate is now cut only when a queue stands on the link. The setting stays off by default.
  • Error correction stays at its percentage. "Adapt error correction" is now off unless you turn it on. It lowered error correction to 5 % on a link that reported no loss, which sent less data but never raised the picture's bitrate, and the first packets lost after a quiet stretch then cost a frame more easily. Its description now says so.
  • A send-buffer entry at stream start is explained. Help & diagnostics now says that a single "The network adapter dropped packets" entry from the moment a stream starts costs only the first picture, and that entries which keep coming during play are the ones to fix.
  • The host log says why the tray icon is missing, and when a display comes back at another scale. A host with no signed-in user, or whose tray icon Windows refused, now logs the reason once and logs the icon going in. After a stream that switched monitors off, each monitor's scale is read as it comes back and logged when it differs from the saved one.

Tested. On the RX 7900 XT at 1080p60 with RTSS as the frame limit, the stream's display was set to 60 Hz mid-stream, as a game in exclusive fullscreen does: 14.8 % of the frame intervals were more than 4 ms off on 6.0.0 and 0.3 % in each of two runs of a test build of this change, and RTSS had its own settings back after every stream. The switch-off has not yet run on a GeForce card, where RTSS limits in its NVIDIA Reflex mode, nor with a game setting the mode itself; the next reports in #133 settle that. The two bitrate rules are checked in the controllers' own models and have not run on a device: for a 33 Mbps stream whose picture needs a tenth of that, three lost frames cut the bitrate to 16 Mbps before and change nothing now. Rubylight's builds, tests, clippy and the console's checks pass in CI on the tagged commit.

Install or upgrade

Disconnect your stream and close host-launched games, then run the installer. Your settings, paired devices and game library are preserved. Open the console at https://localhost:47990.

Full release notes · Build and tests · Code signing policy

Don't miss a new Rubylight release

NewReleases is sending notifications on new releases.