github RamazanKara/Rubylight 2.0.0-rc.22
Butterpollo 2.0.0-rc.22

latest releases: v6.3.2-rc.4, v6.3.1, v6.3.1-rc.14...
pre-releaseone month ago

Windows game streaming, written in Rust. Built for Radeon and Moonlight.

Download Windows x64 installer · Portable ZIP

Watch the 60-second Butterpollo demo

Watch the film with sound · 60 seconds

New in rc.22

  • PyroWave holds 60 fps at high bitrates. The sender's pacer counted every send call and late wake-up on top of the paced wire time, and PyroWave's automatic rate left no room for headers and error correction. A frame that filled its budget took 20-22 ms to send, so 1080p60 at 400 Mbps, 1440p and 4K dropped to about 57 fps. Pacing now credits up to 0.5 ms of send time per batch, and PyroWave paces at 1.25× its demand when the link speed is unknown. The same frames now take 12.8-13.1 ms, about 78% of a 60 fps frame period, at 1080p, 1440p and 4K. The release check now also fails PyroWave streams that replace more than 1% of frames.
  • No more silent "no codec" host after a GPU reset. If the host started before the graphics driver was ready, after a crash or a driver timeout, its encoder check gave up after six tries and every stream failed without saying why. It now keeps retrying until an encoder works, checks again when a client asks, and the console shows "No video encoder available … Retrying" in the meantime. Retries never run while a stream is starting.
  • Stream display problems:
    • VRR streams no longer settle at 60 Hz: the virtual display gets the stream's resolution and refresh after it is created and after every recovery. Before, Windows picked a saved mode, and for some 4K VRR streams that was 60 Hz, so a 116 fps game streamed at about 60 fps. The log now shows virtual display mode applied requested=… actual=…, and the stream card warns if Windows kept a different mode.
    • The stream no longer silently shows your physical desktop: when Windows switched the virtual display off mid-stream (for example when a game reset display settings on exit), capture fell back to the main monitor, so the stream showed the host's desktop at its own resolution. Capture now waits for the stream's display to come back. A temporary "display busy" error no longer rebuilds the display, and a display Windows switched off is switched back on with the exclusive layout and HDR.
    • Saved 60 Hz modes no longer cap VRR: a 60 Hz mode saved for a device also limited the game to 60 fps under VRR. The frame limiter now follows the stream rate, and a VRR stream never reuses a display prepared without VRR.
  • No silent downgrades:
    • Automatic picks the encoder by GPU vendor (AMD → AMF, NVIDIA → NVENC). If it can't start, it tries other hardware encoders and says so on the stream card; it never falls back to software.
    • The console's stream card shows the encoder in use, plus warnings for capture fallback, display modes or frame limits that weren't applied, audio route changes and loss, network limits, and missing input features.
    • The console no longer shows NVENC settings on AMD hosts under Automatic.
  • Install and update safety:
    • A failed update keeps the previous installation working and keeps its backup for a retry.
    • Manual reinstalls and upgrades use the same rollback as in-app updates.
    • Incomplete packages are rejected before anything changes, and downgrades are refused.
    • Migrating from Vibepollo, Apollo or Sunshine checks the old profile before replacing the old host.
    • Driver setup works with non-ASCII user folders and treats "reboot needed" as success.
    • A setup interrupted earlier can't run driver tasks later.
  • Controllers:
    • DualShock 4 rumble and lightbar now work on ViGEmBus.
    • Repeated feedback failures show up in the log.
  • Fewer ways for a stream to end:
    • A PyroWave frame that can't be prepared drops that frame instead of ending the session.
    • A handle leak in the capture threads is fixed.
  • Wi-Fi pacing only where it helps: 2× pacing now applies only to confirmed wireless routes. Wired hosts behind a Hyper-V switch, VPN or Tailscale keep full-speed pacing again.
  • Playnite plugin installed as you: the plugin is installed and removed as the signed-in user instead of SYSTEM, so a link in a user folder can't redirect a SYSTEM write or delete.

Install or upgrade

Disconnect your stream and close host-launched games, then run the installer. Your settings, paired devices and game library are preserved. Open the console at https://localhost:47990.

Full release notes · Validation results

Don't miss a new Rubylight release

NewReleases is sending notifications on new releases.