RROrg/rr 25.12.0

on GitHub

1. 修复 custom sa6400 默认内核为 24 核心, 修复 iSCSI panic 导致的VMM不可用等一系列题.
2. 修复 custom sa6400 支持 virtio GPU 和 AMD GPU.
3. 添加 5.10 内核的型号的 Chelsio 网络设备驱动支持.
4. 添加 vfio_mdev, binder_linux, ashmem_linux 驱动支持.
5. 更新 vmtools addon, 调整日志级别和最大日志文件设置.
6. 修复 virtiofs addon, 可用卷检查逻辑，确保卷存在.
7. 修复 cpuinfo addon, 修复概率性导致 WEBUI 不可访问的问题.
8. 修复 intel wifi 网卡加载失败的问题.
9. 更新 hdddb addon 至 v3.6.116 版本, thanks to @007revad.
10. 修复 sa6400 从 custom 切换 official 内核后失联问题.
11. 其他.

PS:

1. 关于 DSM 7.3:

• 当前不支持 DSM 7.3, 由于官方尚未发布 DSM 7.3 toolkit, 故无法为 DSM 7.3 编译驱动.
• 因为 4.4 内核型号的 7.2版本的驱动 在 7.3 下运行正常，故 4.4 内核型号可升 DSM 7.3+。
• 因 custom sa6400 为自编译内核, 不存在兼容性问题, 故 custom sa6400 可升 DSM 7.3+。
• virtio-net, r8168/r8125/ixgbe/mlx/atlantic/bnx ..官方存在驱动的网卡 可升 DSM 7.3+（需手动切换为官方驱动）.

1. 正式声明:

• 生活所迫, 官方发布 DSM 7.3 toolkit 之前, 该库暂时停止更新。

1. Fix custom sa6400 default kernel is 24 cores, fix iSCSI panic caused VMM unavailable, etc.
2. Fix custom sa6400 support virtio GPU and AMD GPU.
3. Add Chelsio network device driver support for 5.10 kernel models.
4. Add vfio_mdev, binder_linux, ashmem_linux driver support.
5. Update vmtools addon, adjust log level and max log file settings.
6. Fix virtiofs addon, available volume check logic, ensure volume exists.
7. Fix cpuinfo addon, fix probability causing WEBUI unavailability.
8. Fix intel wifi card loading failure issue.
9. Update hdddb addon to v3.6.116 version, thanks to @007revad.
10. Fix sa6400 lost connection issue after switching from custom to official kernel.
11. Other.

PS:

1. About DSM 7.3:

• Currently, DSM 7.3 is not supported. Because the official has not yet released DSM 7.3 toolkit, we cannot compile the driver for DSM 7.3.
• Because the 4.4 kernel model has a 7.2 version driver that runs normally on 7.3, 4.4 kernel models can be upgraded to DSM 7.3+.
• Since custom sa6400 is self-compiled kernel, there is no compatibility issue. Custom sa6400 can be upgraded to DSM 7.3+.
• Official drivers for virtio-net, r8168/r8125/ixgbe/mlx/atlantic/bnx .. exist official drivers for these network cards, which can be upgraded to DSM 7.3+ (need to manually switch to official driver).

1. Official statement:

• Due to life pressure, this repo will be temporarily suspended before the official release of DSM 7.3 toolkit.

Full Changelog: 25.9.7...25.12.0