ChoralRoot 0.42 brings progressions (GitHub issue 64), the way the Ripchord plug-in does them: a key plays a whole
chord stored for it. Sixteen progressions live on the FM-1, each up to 48 keys of chords of up to 8 notes; six of
ChoralRoot's own come with it, and the device manager imports Ripchord presets and lets you write your own. Your
settings, sounds, loops and favorites come through the update.
Keyboard: Prog
Hold KEY, SELECT to page 2 and turn KNOB 2 past Full to Prog. Prog lies over the Chords keyboard:
- The root keys from C4 up play the progression: C4 its first chord, C#4 its second, up to G5, the 20th. A root
key with no chord is silent. - The chord keys F3 to B3 keep their jobs: a root pressed while a chord key is held, or latched by LOCK, plays your
own chord as ever; a root pressed alone plays the progression's. So one hand plays the progression and drops into
chords of its own. - OCT- and OCT+ slide the root keys 12 chords along a longer progression (keys 13 to 32, 25 to 44, 37 to 48);
they do not change the octave there. The Chord view's top right shows where you are (keys 13-32). - Tap KEY to put the progression aside (the plain Chords keyboard) and tap again to bring it back. With Keyboard
on Chords or Full, the tap is Key Mode's on / off as before. - The Chord view names each progression chord from its notes (
Em9,C7/E,Gdim7/B), lists all of them with the
bass in orange, and its top line says which progression and key, in purple (Neo Soul · 5). The Keyboard view is
unchanged. - The bass part, the performance modes (Strum, Arp, Pattern ..), glide and MIDI out play the progression's chords as
any chord; the voicing (KNOB 1) turns them and Transpose moves them.
KEY layer page 3
A third page (SELECT): KNOB 1 picks the progression (its name big, the ones before and after above and below),
KNOB 2 Velocity (50 to 150 % of your touch), KNOB 3 Humanize (a random spread on each note's velocity, up to
40 either side at 100 %), KNOB 4 Transpose (-24 to +24 semitones, the progression alone, on top of page 1's). The
KEY layer now opens on the page you left it on.
The progressions on the unit
- Slots 1 to 6: Pop Four, Jazz ii-V-I, Neo Soul, Gospel Walk, Minor Epic, Dorian Days, eight
chords each. Slots 7 to 16 are empty. - Prog, the progression, Velocity, Humanize and Transpose are kept as the unit is left (no SAVE needed).
- Loops keep which progression and key a chord came from: edit the progression and the loop plays the new chord.
A loop keeps a Transpose of -7 to +7 as it is; beyond, the notes' names and not the octave. - MIDI Keys (Options): its notes play the keys they press with the same rule (note 60 is the first chord), and
notes 80 to 107 reach chords 21 to 48 directly.
In the device manager
The Progressions view (beside Sounds & Loops) reads the unit's sixteen, shows how full they are (3.7 KB in all),
and sends them back with undo:
- Import Ripchord presets: drop
.rpcfiles (many at once). Gaps stay silent keys, keys past 48 are left out, and
a chord of more than 8 notes loses its doubled notes first, then middle ones; each preset's notes say what changed. - Edit and create: the name, the chord on the top keyboard (click notes, at most 8), the keybed below (the FM-1's
or the SMK-37's) to pick a key, Listen, Copy / Paste / Clear, and Export as.rpc. - Factory set puts the six back. A backup holds the progressions; Options > Flash Data erases them.
Also
- In the KEY layer with its keys on pick, C4 and C#4 set the tonic (C and C#) as the other roots do; on the FM-1
layout they did nothing there.
Installing
- The web installer's default is 0.42: press Install. Options > System > Version reads
ChoralRoot 0.42. - From 0.27 to 0.41, nothing needs doing: your sounds, loops, favorites and settings are all there, and the six
progressions are waiting. - From 0.21 or older: install 0.29.2 first and switch the FM-1 on once to keep 0.21's sounds (the installer asks;
0.30.md). - A Single core package: the web installer's Advanced > Hardware fallback. Options > System > Version then
readsChoralRoot 0.42 1-core. - From another firmware: M-Flasher with the M-Bootloader and
choralroot-0.42.fwsc. M-Flasher writes the firmware alone: the unit starts with PRESETS MISSING until ChoralRoot's
own installer has run once. - On the SMK-37 (0.42-smk37): everything above on its 37 keys from C3, its pads as the chord keys; MIDI Keys is
not on the SMK-37. SMK37.md "What to test". - Signed builds: GitHub built these packages from the tag's source and signed them; 0.26.1.md
"Checking a package" says how to check one (choralroot-0.42.fwsc).
Going back
- To 0.41: the installer offers it under Other versions. Your settings, sounds, loops and favorites stay; 0.41
has no progressions (it leaves them stored for 0.42), and a loop slot holding a progression chord reads as empty
there (it is still there for 0.42, unless 0.41 records into that slot). - To another firmware: M-Flasher with the M-Bootloader (MANUAL.md
"Switching firmwares"); back up ChoralRoot's data in the installer first. - To the stock firmware completely: M-VAVE's own updater, M-Updater.
ChoralRoot 0.42 for the M-VAVE FM-1 (identity FM-1_920).
Install from the browser at https://quixotic7.github.io/ChoralRootFM1/ (Chrome or Edge, the FM-1 connected by USB), or with the command-line installer: python3 tools/fm1_install.py choralroot-0.42.fwsc.
choralroot-0.42-1core.fwsc is the same firmware on one processor core, for an FM-1 that crashes or freezes with the standard package (the installer offers it under Advanced > Hardware fallback). Settings, sounds and loops stay when you switch between the two.
SHA256SUMS lists both packages and their apps. GitHub built and signed each from this tag's source (The Firmware Hub's shared workflow); check one with gh attestation verify choralroot-0.42.fwsc --repo Quixotic7/ChoralRootFM1 --signer-workflow zvenson/fm1-build/.github/workflows/build.yml. The package holds three JieLi AC79 SDK files (Apache-2.0); LICENSE, LICENSING.md and LICENSES.zip carry every licence. Installing firmware is at your own risk.
Full Changelog: v0.41...v0.42