New

• Add slow down layers
  Before specifying the number of layers, the printing speed increases linearly to normal printing speed.
  
  

• Add elefant foot compensation layers
  Improved the error of ABS filament on the Z-axis.
  
  
  
  

• Add precise z height
  If enabled, accurate Z-height will be obtained after slicing the model.
  
  

• Add max bridge length
  Generating equidistant tree shaped supports under the bridge reduces the contact area of the supports and reduces material waste.Thanks Bambulab for this idea.
  
  

• Add ironing pattern "Concentric"
  Add an ironing pattern from BambuStudio.
  

• Add top and bottom infill flow ratio
  Used to control the extrusion flow rate of the top and bottom surfaces.
  

• Add infill pattern "Cross Hatch"
  
  

• Add only one wall first layer
  
  

Improvements

• Optimized xy compensation.

• Optimized 3DHoneyComb infill for high-speed printing.
  
  

• Optimized solid filling and improved fit of filling overlap rate.

Bug Fix

• Fixed first layer infill areas.
• Fixed classic's top gap infill.
• Fixed top surface detection, incorrectly anchoring the top surface as a bridge connection.
• Fixed the issue of tool exceeding the exclusion zone detection in some models.

Misc

• Change the default value of "support_material_style" to "Snug".
• Change the default value of "filament_max_volumetric_speed" to 12.