OmniCam now works when an iPhone is the hotspot, with both the camera and the microphone. You can also
send apps an upright 9:16 picture.
Fixed: no video when an iPhone is the hotspot
- What happened: with the computer joined to an iPhone's Personal Hotspot, the phone page opened and the
camera started, but OmniCam stayed on "connecting" and no picture ever arrived. It looked like a firewall
problem, but it wasn't. - Why: OmniCam normally sends video the most direct way a browser offers, WebRTC. When an iPhone is the
hotspot itself, Safari offers WebRTC only the iPhone's mobile data address and never its hotspot address, so
the iPhone's WebRTC traffic never reached the computer. Ordinary page requests still did, which is why the
page loaded. - How it's fixed: OmniCam now spots this straight away and sends the video and microphone over the page's
own encrypted connection instead. The iPhone compresses the video itself, and the computer feeds it to the
OmniCam camera and microphone as usual. Zoom, torch and the other controls work the same, and nothing leaves
your own devices or goes through a server. It also takes over if WebRTC can't connect on any other network. - What wasn't affected: an Android phone as the hotspot, with the iPhone and the computer both joined to it,
already worked and hasn't changed, because the iPhone is then an ordinary Wi-Fi device. Only an iPhone that is
itself the hotspot failed. Home and office Wi-Fi keep using WebRTC as before. - The trade-off: the bar shows Hotspot mode while this is in use. It takes more CPU on the computer and
more battery on the phone, and can add a little delay, so regular Wi-Fi is still the better choice when you
have it. Sending video this way needs iOS 16.4 or newer.
Tested with an iPhone (Safari 26.3) as the hotspot on Fedora 44.
New
- Portrait output: Settings → Camera → Output shape sends apps a 9:16 picture, such as 1080×1920, for a
phone held upright. Video call apps may crop it or add bars. - The bar shows how the phone is connected: Wi-Fi the usual way, or Hotspot mode, which explains itself
when you click it.
New install: download OmniCam-Setup-2.4.0.exe below and run it.
Windows SmartScreen may show "Windows protected your PC" (not code-signed yet): click More info -> Run anyway.
Already running OmniCam? Settings -> About -> Check now installs this version for you;
the installer below does the same thing by hand.
Setup, usage and troubleshooting: README.txt below, or the project README.
Linux (x64): OmniCam-2.4.0.AppImage runs on any distribution (chmod +x it, then run it;
it updates itself like the Windows app), or install OmniCam-2.4.0.rpm (Fedora:
sudo dnf install ./OmniCam-2.4.0.rpm) or OmniCam-2.4.0.deb (Debian, Ubuntu:
sudo apt install ./OmniCam-2.4.0.deb) and get new versions here. The camera needs the
v4l2loopback kernel module; OmniCam sets it up with one click once it is installed. See
Linux in the README.
Verify the download (optional):
- SHA-256 of
OmniCam-Setup-2.4.0.exe:eea4dd7733fe9fa4f8eb30d19e748167a1acbcfdf2443271fd038846807672c7
PowerShell:Get-FileHash .\OmniCam-Setup-2.4.0.exe - Built by this repository's GitHub Actions from the tagged commit, with a signed provenance attestation:
gh attestation verify OmniCam-Setup-2.4.0.exe --repo Orest-Z/OmniCam