This is release 3.89.14.20261121 of OpenCCU which is a MAJOR release with the following comprehensive bugfixes and feature changes:
Note
IMPORTANT: 🇺🇸 This is a very extensive update. Since the last release, all CCU components (ReGaHss, rfd, hs485d, HMIPServer, WebUI, …) and the operating system received a large number of bugfixes, improvements and general changes. In addition, all former OpenCCU patches of the WebUI and the eQ-3 components were migrated to OpenCCU-Base. Before applying this update, download a recent system backup (*.sbk) so you can restore your configuration if something goes wrong. If you run OpenCCU as a virtual machine or container, also create a snapshot.
HINWEIS: 🇩🇪 Bei diesem Release handelt es sich um ein sehr umfangreiches Update. Seit dem letzten Release haben alle CCU-Komponenten (ReGaHss, rfd, hs485d, HMIPServer, WebUI, …) und das Betriebssystem eine Vielzahl an Fehlerbehebungen, Verbesserungen und allgemeinen Änderungen erhalten. Zudem wurden alle bisherigen OpenCCU-Patches der WebUI und der eQ-3-Komponenten nach OpenCCU-Base überführt. Laden Sie vor dem Einspielen dieses Updates daher unbedingt ein aktuelles System-Backup (*.sbk) herunter, damit Sie Ihre Konfiguration im Fehlerfall wiederherstellen können. Wenn Sie OpenCCU als virtuelle Maschine oder Container betreiben, legen Sie zusätzlich einen Snapshot an.
Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag
🚧 Changes:
For all changes, see the full commit log.
🧩 OpenCCU-Base Changes
crypttool 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
devicetypes
- fix the error messages
Unknown paramset/GetAESMasterOperation()of rfd and ReGaHss when opening the device list … (OpenCCU-Base#335, @jens-maus) - fix the limits of
SET_TEMPERATUREof the HM-CC-RT-DN-BoM, as in the HM-CC-RT-DN … (OpenCCU-Base#221, @jhoos70) - fix the long-press action of the CFM-TW LED profile writing the short-press register (OpenCCU-Base#63, @jens-maus)
eq3_char_loop 1.6
- hang up the connections of rfd and the HmIP server when multimacd exits (OpenCCU-Base#112, @jens-maus)
eq3configcmd 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
eq3configd 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
hmipserver
- update
HMIPServer.jarto the build of 2026-11-19 (1.5.2-SNAPSHOT) from eQ-3 (OpenCCU-Base#399) HmIP-RFnow removes a registered XML-RPC client after 3 failed calls in a row … (OpenCCU-Base#360)- a registration on
VirtualDevicesis no longer kept for ever after it was replaced … (OpenCCU-Base#360) - lower
Legacy.Client.Socket.Timeoutin thecrRFD.conftemplate from 600 s to 30 s (OpenCCU-Base#359) HmIP-RFnow retries thelistDevicescall to a newly registered client every 30 s while it fails … (homematicip/OpenCCU-Base#16, OpenCCU-Base#180)- a client that registers again on
HmIP-RFwithinitno longer leaves its HTTP client with one thread and two file … (homematicip/OpenCCU-Base#16, OpenCCU-Base#36) - lower
Legacy.Client.Connection.Timeoutin thecrRFD.conftemplate from 600 s to 30 s (OpenCCU-Base#361)
hs485d 1.3.0 – 1.5.0
- add the option
-v/--version, which prints the version of hs485d and the versions of the OpenCCU-Base libraries it … (OpenCCU-Base#294, @jens-maus) - add the RPC method
restoreConfigToDevice, which writes the configuration stored on the CCU to a device again … (OpenCCU-Base#217, @jens-maus) - fix a logic layer that registers after a device replacement getting
deleteDevicesfor the old device instead of … (OpenCCU-Base#283, @jens-maus) - fix a replaced device that is added again still being reported as replaced … (OpenCCU-Base#287, @jens-maus)
- handle SIGTERM and SIGINT with a clean shutdown (OpenCCU-Base#255, @hobbyquaker)
- fix the RPC server no longer answering, or hs485d aborting, once one of its sockets got a file descriptor of 1024 or … (OpenCCU-Base#285, @jens-maus)
- an interrupted
select()is no longer logged as an error (OpenCCU-Base#281, @jens-maus) - fix a possible use of freed memory when hs485d reconnected to a LAN gateway while a value was sent or received (OpenCCU-Base#265, @hobbyquaker)
- fix an RPC call with fewer arguments than the method expects reading freed memory and possibly crashing hs485d (OpenCCU-Base#271, @jens-maus)
- fix hs485d crashing after every restart when a firmware file of a device type had no data (OpenCCU-Base#267, @jens-maus)
- fix a use of freed memory after the channels of a device were rebuilt (OpenCCU-Base#257, @jens-maus)
- fix the channels of a newly learned device being created without their channel class until hs485d was restarted … (OpenCCU-Base#209, @hobbyquaker)
- fix a logic layer that accepts a connection but never answers freezing hs485d or making it grow by a thread and a … (OpenCCU-Base#207, OpenCCU-Base#208, @hobbyquaker)
- fix a wrong conversion of long strings to unsigned integers in libhsscomm (OpenCCU-Base#268, @jens-maus)
- fix hs485d hanging at start at 100 % CPU when a line of
hs485d.confhad 256 characters or more (OpenCCU-Base#263, @jens-maus) - fix the event dispatcher thread of a receiver being joined twice when the receiver was removed … (OpenCCU-Base#269, @jens-maus)
- fix crashes of the RPC server on a nested
system.multicall… (OpenCCU-Base#138, OpenCCU-Base#140, OpenCCU-Base#189, @jens-maus) - fix a crash of the RPC client when a reconnect to a logic layer failed (OpenCCU-Base#27, @jens-maus)
- fix unsafe array handling and missing read checks in libxmlparser (OpenCCU-Base#29, @jens-maus)
hs485dLoader 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
hss_led 2.3.0 – 2.3.1
- the radio LED takes any color as
'#RRGGBB'besides the eight names and a brightness of 1-100 % for all its patterns (OpenCCU-Base#350, @jens-maus) - first version kept in
version.sh(OpenCCU-Base#294, @jens-maus) - fix the UDP channel no longer working once its socket got a file descriptor of 1024 or more (OpenCCU-Base#285, @jens-maus)
- report an active
/etc/config/disableLEDlock in the radio LED status and mention it in thehss_ledctlhelp (OpenCCU-Base#203, @jens-maus) - run the LED controller and the status calculation in one process, with
hss_ledctlas its client invocation … (OpenCCU-Base#59, @jens-maus)
libelvutils 1.0.0
- first version with a version string, returned by
elvutils_version()(OpenCCU-Base#294, @jens-maus) - fix the multicast sender failing once a descriptor was 1024 or more (OpenCCU-Base#285, @jens-maus)
- fix the thread of an actor being joined twice, and a hang when an actor was stopped right after it was started (OpenCCU-Base#269, @jens-maus)
- refuse a hex file without data instead of crashing the reader (OpenCCU-Base#267, @jens-maus)
- read configuration lines of any length (OpenCCU-Base#263, @jens-maus)
libeq3config 1.0.0
- first version with a version string, returned by
eq3config_version()(OpenCCU-Base#294, @jens-maus) - fix the serial port wrapper failing once a descriptor was 1024 or more (OpenCCU-Base#285, @jens-maus)
libhsscomm 1.0.0
- first version with a version string, returned by
hsscomm_version()(OpenCCU-Base#294, @jens-maus) - fix the TCP and serial port wrappers failing once a descriptor was 1024 or more (OpenCCU-Base#285, @jens-maus)
- send
replaceDeviceat the init of a receiver only to that receiver … (OpenCCU-Base#283, @jens-maus) - fix a wrong conversion of long strings to unsigned integers (OpenCCU-Base#268, @jens-maus)
- add
UnregisterInternalValueEvents(), so a channel can remove its event registration before it is deleted (OpenCCU-Base#257, @jens-maus) - bound the init callbacks and the asynchronous callbacks to a receiver with a 30 s timeout (OpenCCU-Base#207, OpenCCU-Base#208, @hobbyquaker)
libLanDeviceUtils 1.0.0
- first version with a version string, returned by
landeviceutils_version()(OpenCCU-Base#294, @jens-maus) - fix the UDP datagram sender failing once a descriptor was 1024 or more (OpenCCU-Base#285, @jens-maus)
libUnifiedLanComm 1.0.0 – 1.1.0
- add
UnifiedLanCommController::setConnectTimeout(), which limits the TCP connect to a gateway (OpenCCU-Base#383, @hobbyquaker) - first version with a version string, returned by
unifiedlancomm_version()(OpenCCU-Base#294, @jens-maus)
libxmlparser 1.15
- add
xmlparser_version(), which returns the version of the loaded library (OpenCCU-Base#294, @jens-maus)
libXmlRpc 0.11 – 0.13
- add
xmlrpc_version(), which returns the version of the loaded library (OpenCCU-Base#294, @jens-maus) - fix the RPC server no longer answering, or the process aborting, once a socket got a file descriptor of 1024 or more (OpenCCU-Base#285, @jens-maus)
- an interrupted
select()is no longer logged as an error (OpenCCU-Base#281, @jens-maus) - fix an RPC method reading freed memory when a call has fewer arguments than the method reads (OpenCCU-Base#271, @jens-maus)
- fix a crash of the server on a deeply nested value, reachable with a single unauthenticated request (OpenCCU-Base#189, @jens-maus)
- fix out-of-bounds reads of the BIN-RPC deserializer on invalid length fields (OpenCCU-Base#140, @jens-maus)
- fix a crash of the server on a
system.multicallnested in another one (OpenCCU-Base#138, @jens-maus)
multimacd 1.3.0
- add the option
-v/--version, which prints the version of multimacd and of the libelvutils it uses (OpenCCU-Base#294, @jens-maus)
ReGaHss R1.00.0388.0256 – R1.00.0388.0269
- fix the setters BreakOnRestart(value) of a rule destination and system.LogLevel(value) / system.SyslogIPAddress(value) … (OpenCCU#4722)
- add the option
-v/--version, which prints the version of ReGaHss and the versions of the OpenCCU-Base libraries … (OpenCCU-Base#294) - fix State(true) of a program called by a script not evaluating the program (OpenCCU#228)
- fix a program being executed when it is activated, e.g. a new program at its first save in the WebUI or a program … (OpenCCU#228)
- add the setting ExecuteOnStartup() of a program, whether it is executed at the start of ReGaHss (OpenCCU#223)
- add the option "ScriptVariableScope=local" which makes the variables of the script of a program local to its execution (OpenCCU#84)
- fix delays of programs between 2 and 3 hours being shifted by an hour on the day of the change to daylight saving time (OpenCCU#584)
- fix the script of a program ending with a script runtime error after setting an alarm which has an expression … (OpenCCU#84)
- log a warning if the script of a program uses a variable it does not declare before … (OpenCCU#84)
- fix the script of a program with a syntax error being executed partially (OpenCCU#84)
- fix the next time of monthly time modules repeated every n months (OpenCCU#886)
- fix Next() of a time module which was not active since the start of ReGaHss logging "interface pointer are not … (OpenCCU#889)
- fix calling a method on the result of a method call whose last parameter is a method call without parameters … (OpenCCU#983)
- fix LastValue() of the number of active alarms and service messages always returning the current value (OpenCCU#467)
- fix the WebUI showing alarms or service messages after a restart of ReGaHss which did not exist (OpenCCU#1016)
- fix ReGaHss crashing if a script created a very long string, e.g. by doubling a string in a loop (OpenCCU#1420)
- fix the error page of the web server showing its message and link on the same line when embedded into the WebUI (OpenCCU#1598)
- fix programs not reacting to an update of a device datapoint or system variable although their condition was met (OpenCCU#1734, OpenCCU#1278)
- fix URL encoded characters in the URL parameters of remote script calls (e.g. … (OpenCCU#2216)
- fix foreach() silently skipping the loop if the loop variable was not declared as string, e.g. 'var x (OpenCCU#2612)
- fix the WebUI showing wrong, incomplete or duplicated content or not loading at all, and ReGaHss crashing … (OpenCCU#2638, OpenCCU#1467)
- fix undefined behaviour when loading and saving the parameter sets of devices, channels and UI data in the DOM file
- fix ReGaHss aborting with "pure virtual method called" / "terminate called without an active exception" at the end of a …
- fix the shutdown of the authentication service when ReGaHss is stopped
- fix enumerations of the type etUserPages not being accessible (OpenCCU#2640)
- fix sporadic crashes and hangs of ReGaHss when it is stopped with SIGTERM (ReGaHss-Test#196)
- fix an out-of-bounds read when a new object (e.g. dom.CreateObject()) was added to the internal object map while the …
- fix .ToString() and .Format() of UTC time values (OpenCCU#2670)
- fix .Format() of time values without format raising a script runtime error (OpenCCU#2669)
- fix foreach() over an integer count when the script assigns a value of another type to the loop variable (OpenCCU#2613, OpenCCU#2614, OpenCCU#2615, OpenCCU#2616, OpenCCU#2617, OpenCCU#2619, OpenCCU#2620, OpenCCU#2622)
- fix ReGaHss crashing after system.SyslogIPAddress() was set to -1, "" or "255.255.255.255" (OpenCCU#2692)
- fix IsTypeOf() of enumerations (OpenCCU#2950)
- fix ReGaHss sporadically aborting when stopped with SIGTERM/SIGINT
- fix ReGaHss aborting when its web server cannot accept a connection, e.g. because no file descriptors are left
- fix out-of-bounds access of the DayProfileEntry() script method (OpenCCU#3179)
- fix ChnNumber() logging an "invalid Address" error for channels without an address (OpenCCU#3156)
- fix State() of IP data points without value type rejecting or changing the text to send (OpenCCU#3048)
- fix ProgramExecute() keeping the trigger object/value of the previous program execution in the conditions … (OpenCCU#2978)
- fix a NULL pointer dereference in the web server when an HTTP request without a parseable method is received (OpenCCU#4388)
rfd 2.6.1 – 2.7.1
- fix a LAN gateway that is not reachable when rfd starts being given up for good (OpenCCU-Base#383, @hobbyquaker)
- fix rfd's RPC server hanging for about two minutes at a time while a LAN gateway does not answer at all … (OpenCCU-Base#375, @hobbyquaker)
- add the option
-v/--version, which prints the version of rfd and the versions of the OpenCCU-Base libraries it … (OpenCCU-Base#294, @jens-maus) - fix a request to the radio module getting the answer of another one (OpenCCU-Base#282, @jens-maus)
- fix a logic layer that registers after a device replacement getting
deleteDevicesfor the old device instead of … (OpenCCU-Base#283, @jens-maus) - handle SIGTERM and SIGINT with a clean shutdown (OpenCCU-Base#255, @hobbyquaker)
- fix the RPC server no longer answering, or rfd aborting, once one of its sockets got a file descriptor of 1024 or more (OpenCCU-Base#285, @jens-maus)
- an interrupted
select()is no longer logged as an error (OpenCCU-Base#281, @jens-maus) - fix the RSSI of a device's acknowledgement being wrong, e.g. -216 instead of -40 dBm on ARM and +40 on x86_64 (OpenCCU-Base#254, @hobbyquaker)
- fix rfd using a full CPU core and still reporting the interface as connected when the serial device of the radio module … (OpenCCU-Base#264, @hobbyquaker)
- fix an RPC call with fewer arguments than the method expects (e.g.
setVolatileMetadata("x")) reading freed memory and … (OpenCCU-Base#271, @jens-maus) - correct the list of log levels in the sample
rfd.conf(OpenCCU-Base#277, @jens-maus) - fix
setBidcosInterface()with an interface that is not configured storing that interface for the device while using … (OpenCCU-Base#272, @jens-maus) - fix events getting lost under load (OpenCCU-Base#274, @hobbyquaker)
- fix the event dispatcher thread of a receiver being joined twice when the receiver was removed … (OpenCCU-Base#269, @jens-maus)
- fix a read past the end of the duty cycle threshold map when the radio module reported a duty cycle of 100 % (OpenCCU-Base#266, @jens-maus)
- fix rfd hanging at start at 100 % CPU when a line of
rfd.confor of the key and address files had 256 characters or … (OpenCCU-Base#263, @jens-maus) - fix a wrong conversion of long strings to unsigned integers in libhsscomm (OpenCCU-Base#268, @jens-maus)
- fix rfd terminating on a JSON value whose last member is empty … (OpenCCU-Base#260, @jens-maus)
- remove the RPC method
exitfrom normal builds (OpenCCU-Base#258, @jens-maus) - fix the AES policy of the channels not being restored after a coprocessor re-init … (OpenCCU-Base#211, @hobbyquaker)
- fix a logic layer that accepts a connection but never answers freezing rfd or making it grow by a thread and a socket … (OpenCCU-Base#207, OpenCCU-Base#208, @hobbyquaker)
- fix crashes of the RPC server on a nested
system.multicall… (OpenCCU-Base#138, OpenCCU-Base#140, OpenCCU-Base#189, @jens-maus) - report a serial device with a persistent read error as not connected in
listBidcosInterfaces()(OpenCCU-Base#116, @jens-maus) - fix rfd crashing on every restart of multimacd (OpenCCU-Base#115, @jens-maus)
- fix a crash of the RPC client when a reconnect to a logic layer failed (OpenCCU-Base#27, @jens-maus)
- fix unsafe array handling and missing read checks in libxmlparser (OpenCCU-Base#29, @jens-maus)
SetInterfaceClock 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
ssdpd 1.0.0
- first version with a version string (OpenCCU-Base#294, @jens-maus)
- fix ssdpd failing once its socket got a file descriptor of 1024 or more (OpenCCU-Base#285, @jens-maus)
tcl_homematic 1.1
- add
RemoveConfigPage, so an add-on can remove its own configuration page from/etc/config/hm_addons.cfg(OpenCCU-Base#48, @jens-maus)
webui
- the date, time and name filters of the system protocol are applied with Enter … (OpenCCU-Base#385, @MichaelN0815)
- system variable values with HTML are shown with their layout again (OpenCCU-Base#374, @jens-maus)
- changing a program condition from a device selection to a system state … (OpenCCU-Base#371, @MichaelN0815)
- the help page shows in the HomeMatic-RF block whether a BidCos-RF security key is set ("Security Key" (OpenCCU-Base#365, @MichaelN0815)
- a firmware update now needs 1.8 GB instead of 2.8 GB of free user space if the recovery system unpacks the disk image … (OpenCCU-Base#366, @jens-maus)
- the teach-in dialog shows below the teach-in counter of HmIP-RF and HmIP-Wired whether the eQ-3 key server … (OpenCCU-Base#355, @MichaelN0815, @jens-maus)
- "Inbox" in the teach-in dialog now also stops the BidCos-RF and HmIP-RF teach-in mode when the interface was only found … (OpenCCU-Base#355, @MichaelN0815, @jens-maus)
- a page that is opened or reloaded while another page is still loading is now loaded afterwards (OpenCCU-Base#353, @jens-maus)
- the hints and errors below the system variable dialog are shown as plain text again (OpenCCU-Base#354, @jens-maus)
- the value dialog of a system variable sets only the value (OpenCCU-Base#352, @jens-maus)
- the system variable dialog shows the text of a string variable as it is stored (OpenCCU-Base#351, @jens-maus)
- a text with several translation placeholders without a space in between is now translated completely … (OpenCCU-Base#349, @jens-maus)
- the values of the system variables shown on the start page keep only simple text formatting (OpenCCU-Base#348, @jens-maus)
- controls that are only clickable texts or images can be used with the keyboard (OpenCCU-Base#347, @jens-maus)
- when the location is transferred to the Homematic IP devices, a message now lists the devices whose update failed (OpenCCU-Base#345, @jens-maus)
- the heating control of "Status and control" shows an actual temperature of 0 °C and a battery voltage of 0 V instead of … (OpenCCU-Base#344, @jens-maus)
- a number input of the device settings that is checked in place no longer rewrites an unchanged value with more decimal … (OpenCCU-Base#346, @jens-maus)
- the JSON API escapes all control characters in strings as JSON requires (OpenCCU-Base#343, @jens-maus)
- the WebUI is branded as OpenCCU (OpenCCU-Base#341, @jens-maus)
- the date, time and name filters of the system protocol put the keyboard focus into their input field when they are … (OpenCCU-Base#298, @MichaelN0815)
- the script editor of programs and the "Execute script" dialog use CodeMirror 6 with syntax highlighting of HomeMatic … (OpenCCU-Base#340, @jens-maus)
- deleting the last action of the terminal "else" branch of a program no longer leaves an empty "else" rule behind in the … (OpenCCU-Base#303, @MichaelN0815)
hm_startupno longer tries to name an object it failed to create while creating the default rooms and functions of an … (OpenCCU-Base#339, @jens-maus)- the size of the WebUI follows the browser window with CSS instead of JavaScript (OpenCCU-Base#338, @jens-maus)
- a system language can be chosen under "Settings" > "User management" (OpenCCU-Base#336, @jens-maus)
- the buttons of the control panel are no longer laid out in a fixed table of four columns but wrap according to the … (OpenCCU-Base#324, @jens-maus)
- the file selection of the software update, the certificate upload, the backup restore … (OpenCCU-Base#323, @jens-maus)
- the error pages shown while the CCU is starting center the logo and the hint to wait in the middle of the window and no … (OpenCCU-Base#322, @jens-maus)
- style fixes across the WebUI (OpenCCU-Base#321, @jens-maus)
- fix the time settings reporting that the position was transferred to the Homematic IP devices when reading the position … (OpenCCU-Base#320, @jens-maus)
- fix saving a system variable in its dialog when its name or description contains characters the dialog does not allow … (OpenCCU-Base#319, @jens-maus)
- HTML-escape the names of devices, channels, rooms, functions, programs … (OpenCCU-Base#315)
- fix the translation of pages decoding %-escapes like
%3Cin names and other texts next to a translation placeholder … (OpenCCU-Base#316, @jens-maus) - more countries, cities and time zones in the time settings (OpenCCU-Base#318, @jens-maus)
- advanced editing of a system variable (OpenCCU-Base#317, @jens-maus)
- change the value of a system variable directly (OpenCCU-Base#313, @jens-maus)
- fix the program list, the device, channel, room and function lists, the inbox … (OpenCCU-Base#312, @jens-maus)
- show the value of the presence variable in "Status and control" … (OpenCCU-Base#314, @jens-maus)
- fix the program chooser, the system protocol and the value input of number variables in the program editor failing … (OpenCCU-Base#306, @jens-maus)
- sort the entries of the main menu's submenus alphabetically and show an icon before each entry (OpenCCU-Base#308, @jens-maus)
- remove the unused Expect-based multipart reader from
cgi.tcl(OpenCCU-Base#307, @jens-maus) - upload firmware, add-on, backup and certificate files through a small shell CGI that writes the file directly to … (OpenCCU-Base#301, @jens-maus)
- fix the system variable chooser of the program editor staying empty … (OpenCCU-Base#304, @jens-maus)
- show the duty cycle and carrier sense of every gateway as one row each on the start page (OpenCCU-Base#293, @jens-maus)
- group the device firmware update dialog of the start page by device type and current version … (OpenCCU-Base#292, @jens-maus)
- show available add-on updates on the start page (OpenCCU-Base#290, @jens-maus)
- fix the switching thresholds of HmIP power meters failing to save for values like 1.1, and round decimal ties correctly (OpenCCU-Base#286, @jens-maus)
- validate and round parameter values in the device settings with the decimal places of their range instead of a fixed … (OpenCCU-Base#276, @jens-maus)
- add a "Service messages" checkbox to the device settings to switch off the service messages of a device (OpenCCU-Base#275, @jens-maus)
- keep the list filters in the browser and restore them when a list is shown again (OpenCCU-Base#273, @jens-maus)
- separate values and units consistently with a space and show ESI energy values with two decimals (OpenCCU-Base#262, @jens-maus)
- show humidity, battery voltage and valve state in the heating controls of the control pages (OpenCCU-Base#261, @jens-maus)
- remove the field test option (OpenCCU-Base#259, @jens-maus)
- place the channel highlights onto the buttons of the device images of HmIP-WRC6, HmIP-BSL and HmIPW-DRAP/-DRS4/-DRS8 (OpenCCU-Base#256, @jens-maus)
- let the text filters of the WebUI lists match regular expressions (OpenCCU-Base#253, @jens-maus)
- add "Rename channels" to the device configuration dialog to name all channels "" (OpenCCU-Base#252, @jens-maus)
- fix the system protocol logging event-only boolean datapoints by their label regardless of value (OpenCCU-Base#251, @jens-maus)
- add a Homematic IP log level to the logging settings and start, stop and restart the HMIPServer via monit (OpenCCU-Base#250, @jens-maus)
- add the Tailscale VPN switch and authentication button to the network settings (OpenCCU-Base#249, @jens-maus)
- add up/down arrows to reorder the shared system variables of a user (OpenCCU-Base#247, @jens-maus)
- allow assigning rooms and functions to channel 0 of devices and show maintenance channels in the device list (OpenCCU-Base#246, @jens-maus)
- let administrators open the channel settings and the program editor directly from the status and control pages … (OpenCCU-Base#245, @jens-maus)
- add a "when"/"not when" selection to negate single program conditions (OpenCCU-Base#244, @jens-maus)
- show the free user space on the maintenance page and disable the update buttons if it is below the 2.8 GB an update … (OpenCCU-Base#242, @jens-maus)
- add "Activate"/"Deactivate" buttons to the channel configuration dialog to forward button events of a channel to the … (OpenCCU-Base#240, @jens-maus)
- fix the device, room and function control pages jumping to the first entry when a column header is clicked or a stored … (OpenCCU-Base#239, @jens-maus)
- speed up the translation of WebUI pages by caching translations (OpenCCU-Base#237, @jens-maus)
- fix descending sorts of the device list and channel chooser swapping entries that compare as equal … (OpenCCU-Base#236, @jens-maus)
- fix the simplified device view showing the wrong virtual channels when channels are named (OpenCCU-Base#235, @jens-maus)
- sort WebUI lists naturally, ignoring case and accents (OpenCCU-Base#234, @jens-maus)
- fix the device list showing old gateway names after renaming, adding or removing a LAN gateway (OpenCCU-Base#233, @jens-maus)
- fix gateway names with markup or quotes being inserted unescaped into the interface filter of the device list … (OpenCCU-Base#232, @jens-maus)
- show the assigned HM-LGW-O-TW-W-EU gateway of BidCos-RF devices in the device list and device settings … (OpenCCU-Base#230, @jens-maus)
- show the duty cycle and firmware of a HM-LGW-O-TW-W-EU only while it is connected, not next to a connection error (OpenCCU-Base#229, @jens-maus)
- fix LAN gateways keeping an old connection state when the state request fails or reports another gateway (OpenCCU-Base#228, @jens-maus)
- add an "Advanced Settings" dialog to the control panel for OpenCCU options and the system name … (OpenCCU-Base#227, @jens-maus)
- fix the LAN gateway table showing "undefined%" or "undefined" when the duty cycle or firmware is missing (OpenCCU-Base#226, @jens-maus)
- show the duty cycle and firmware version of the LAN gateways in the LAN gateway configuration (OpenCCU-Base#225, @jens-maus)
- add the program option "Bei Zentralenstart ausführen" to the program editor (OpenCCU-Base#223, OpenCCU-Base#231, @jens-maus)
- sort favorites manually with up/down buttons in the favorites overview, per user list (OpenCCU-Base#220, @jens-maus)
- improve the system variable selection dialog (OpenCCU-Base#218, @jens-maus)
- fix the alarm messages page leaving the message column empty when the alarm was triggered by a system variable or a … (OpenCCU-Base#215, @jens-maus)
- add a "Restore Config" button to the device settings page to send the stored configuration back to a BidCos-RF or BidCos-Wired device (OpenCCU-Base#214, OpenCCU-Base#216, OpenCCU-Base#217, @jens-maus)
- name the object in the delete confirmation dialogs of system variables, users, favorites and direct links (OpenCCU-Base#213, @jens-maus)
- support the HmIP-RFUSB stick as central radio module, named "Homematic IP Central Control Unit" like the HmIP-CCU3 and … (OpenCCU-Base#210, @jens-maus)
- fix a control panel popup that fails to load staying empty and blocking the WebUI (OpenCCU-Base#205, @jens-maus)
- use the common thermostat settings page for HmIP-eTRV-B, -B1, -C, -C-2 and -CL, with window-open temperature, valve … (OpenCCU-Base#200, @jens-maus)
- show the maintenance datapoints of a device, such as battery, signal strength, error flags and operating time … (OpenCCU-Base#199, @jens-maus)
- add a "Restart in recovery mode" button to the maintenance page (OpenCCU-Base#194, @jens-maus)
- remove the ineffective ReGa version selection from the maintenance page (OpenCCU-Base#193, @jens-maus)
- add an offset and an optional duration in minutes to the daytime and nighttime astro options of the time module in … (OpenCCU-Base#188, @jens-maus)
- keep the right column of the status and control pages by device … (OpenCCU-Base#186, @jens-maus)
- add favicons, an Apple touch icon and a web app manifest, so browsers and mobile devices show a high-resolution icon … (OpenCCU-Base#158, @jens-maus)
- fix the type label of the HmIP-PS-A, which was shown as "HMIP-PS-A" (homematicip/OpenCCU-Base#15, @cn-eq3)
- show HTML system variable values in the user favorites on the start page as HTML also after they are updated … (OpenCCU-Base#136, @jens-maus)
- add a button to the system variable list to show or hide internal system variables, show them with a grey background … (OpenCCU-Base#132, @jens-maus)
- fix system variables with a line break in their description or value list … (OpenCCU-Base#130, @jens-maus)
- show the LED colour of the HM-OU-LED16 keys next to the keys on the control page (OpenCCU-Base#129, @jens-maus)
- store install wizard and firewall hint acknowledgements per user ID … (OpenCCU-Base#128, @jens-maus)
- show the role and UI mode of the logged-on user in the header (OpenCCU-Base#127, @jens-maus)
- stop the install wizard or the firewall hint from appearing on every login for user names with several blanks … (OpenCCU-Base#126, @jens-maus)
- add a "Save changes" button to the header that saves the configuration permanently (OpenCCU-Base#125, @jens-maus)
- allow device firmware updates on systems with HmIP-RF only, by checking the duty cycle of the HmIP-RF interface when … (OpenCCU-Base#124, @jens-maus)
- report failed add-on operations such as an uninstall correctly instead of "Failure Success", point to an error log … (OpenCCU-Base#123, @jens-maus)
- show the extended channel descriptions of HmIP channels again, for example in the device settings (OpenCCU-Base#121, @jens-maus)
- keep the arrow, page and space keys scrolling the page after a page change, without clicking into the page first (OpenCCU-Base#118, @jens-maus)
- allow renaming and deleting the built-in Admin user in the user management (OpenCCU-Base#114, @jens-maus)
- include all log files in /var/log in the log file download of the maintenance page … (OpenCCU-Base#108, @jens-maus)
- sort the add-ons in the additional software dialog by their name, ignoring case (OpenCCU-Base#105, @jens-maus)
- show a progress bar and disable the logout button while logging out … (OpenCCU-Base#93, @jens-maus)
- fix the script error logged when the general channel settings are closed with "OK" … (OpenCCU-Base#85, @jens-maus)
- add German and English descriptions for 51 channel types that had none (OpenCCU-Base#68, @jens-maus)
- fix the comfort/eco temperature check of HM-CC-RT-DN, HM-TC-IT-WM-W-EU and HM-CC-VG-1 ignoring decimals and … (OpenCCU-Base#66, @jens-maus)
- fix the system protocol breaking when a string system variable value contains a single quote (OpenCCU-Base#58, @jens-maus)
- show the currently assigned IP address, netmask, gateway and DNS servers in the network settings when DHCP is used (OpenCCU-Base#54, @jens-maus)
- fix ReGa script injection through crafted favorite IDs in the PDA favorites pages and repair their broken "execute … (OpenCCU-Base#46, @jens-maus)
🏠 CCU/homematicIP Service Changes
- all remaining OCCU/WebUI patches of OpenCCU were migrated to OpenCCU-Base, so OpenCCU no longer patches the OCCU/WebUI sources itself (188 pull requests #4205 – #4723, list, @jens-maus)
- bump openccu-base to 3.89.14 (#4771, @jens-maus)
- bump neoserver to 2.21.2 (#4769, @jens-maus)
- feat(recovery): unpack firmware images as sparse files (#4741, @jens-maus)
- build(generic_raw_uart): bump generic_raw_uart to 89489c3 (#4742, @jens-maus)
- feat(rpi-rf-mod): drive the RPI-RF-MOD LED by software PWM on Raspberry Pi and Tinkerboard 2 (#4715, @jens-maus)
- perf(rf): probe the GPIO header's radio module with a time limit (#4713, @jens-maus)
- feat(recovery): append hardware diagnostics to the kept install log (#4711, @jens-maus)
- perf(network): check the Ethernet carrier every 0.2 s instead of every 2 s (#4699, @jens-maus)
- feat(hmipserver): optional loopback binding for the HmIP XML-RPC port (#4698, @jens-maus)
- feat(multimacd): optional log level of its own (#4697, @jens-maus)
- fix(recovery): remove a refused firmware upload from the userfs (#4692, @jens-maus)
- refactor(overlay): move S50lighttpd from the WebUI overlay to the base (#4701, @jens-maus)
- fix(init): replace /var/hm_mode in one step (#4700, @jens-maus)
- fix(init): take the board serial fallback from the board's MAC address (#4693, @jens-maus)
- fix(init): do not report a factory reset whose mkfs failed (#4569, @hobbyquaker)
- fix(network): read the IPv4 address from the word after src (#4684, @jens-maus)
- fix(recovery): userfs growth (#4566, @hobbyquaker)
- fix(rpi-rf-mod): point the vRTC alias to rtc@a8 on ODROID-C4/N2 (#4660, @jens-maus)
- fix(rpi-rf-mod): use pin 35 as RPI-RF-MOD reset on ODROID-N2 (#4659, @jens-maus)
- Document RPI-RF-MOD radio LED support and limitations (#4658, @jens-maus)
- build(packages): download single files for rpi-eeprom and eq3_char_loop (#4627, @jens-maus)
- fix(rpi3): reset the LAN9514 through LAN_RUN when the kernel boots (#4596, @jens-maus)
- fix(monit): restart HMIPServer before it runs out of file descriptors (#4614, @jens-maus)
- fix(init): wait for rfd and hs485d to exit when stopping them (#4611, @jens-maus)
- fix(recovery): apply the board kernel patches to the recovery kernel (#4598, @jens-maus)
- fix(monit): avoid a readlink fork per fd in checkStaleDevice.sh (#4547, @jens-maus)
- fix(rf): restart the RF stack after an HB-RF-ETH session reset (#4527, @jens-maus)
- fix(rf): wait for raw-uart device access before RF module detection (#4525, @jens-maus)
- fix(package): add missing hash files for eq3_char_loop and hardkernel-boot (#4517, @jens-maus)
- fix(monit): restart rfd and HMIPServer if a multimacd restart left them with a stale device (#4329, @jens-maus)
- fix(HMIPServer): add checkHmIPsecurityCounter.sh to protect HmIP security counter against 32 bit overflow (#4317, @jens-maus)
- switch generic_raw_uart/detect_radio_module to OpenCCU/piVCCU fork (#4302, @jens-maus)
- fix(ntp): ensure valid system time before HMIPServer starts (#4276, @jens-maus)
- build(openccu-base): disable default components in minimal builds (#4246, @jens-maus)
- fix(recovery): share runtime state between /run and /var/run (#4235, @jens-maus)
- Remove multilib32 from all recovery-system platform configs (#4224, @jens-maus)
🌐 WebUI Changes
- fix(webui): show script errors and fix popup size check in script editor (#4689, @jens-maus)
- fix(lighttpd): create the certificate without an IP address when there is none, leave a managed server.pem alone (#4567, @hobbyquaker)
- fix(webui): accept only de and en as system language (#4683, @jens-maus)
- fix(webui): keep the file upload buttons usable with the keyboard (#4678, @jens-maus)
- fix(webui): fix the layout and empty selection of the file upload buttons (#4677, @jens-maus)
- fix(webui): keep the error pages hidden without JavaScript (#4674, @jens-maus)
- fix(webui): keep the value field of the light dialogs inside its box (#4672, @jens-maus)
- fix(webui): keep the filter buttons of the room and function list working (#4666, @jens-maus)
- fix(webui): translate only the start page favorites after a rendered control (#4663, @jens-maus)
- fix(webui): translate updated controls in the favorites view (#4662, @jens-maus)
- fix(webui): use current time zone names in the location list (#4657, @jens-maus)
- fix(webui): keep the order of duplicate value list entries (#4655, @jens-maus)
- fix(webui): keep the selected value list entry when it is unchanged (#4654, @jens-maus)
- fix(webui): define svEscapeHtml only once in the system variable dialog (#4653, @jens-maus)
- fix(webui): clear the channel assignment when the channel chooser is cancelled (#4650, @jens-maus)
- fix(webui): skip the presence variable and reject empty numbers in the value dialog (#4648, @jens-maus)
- fix(webui): keep text values and units intact in the system variable value dialog (#4646, @jens-maus)
- fix(webui): give the submenu icons an empty alt text (#4643, @jens-maus)
- fix(webui): restore the certificate check and harden the upload helper (#4636, @jens-maus)
- fix(webui): accept only uploaded files and known parameters in the upload flow (#4633, @jens-maus)
- fix(webui): hide duty cycle rows of interfaces missing from the update (#4629, @jens-maus)
- fix(webui): keep the serial number column of the firmware dialog in the table (#4625, @jens-maus)
- fix(webui): load the addon update notice asynchronously with a time limit (#4621, @jens-maus)
- fix(webui): escape the addon update notice on the start page (#4619, @jens-maus)
- fix(webui): round threshold values and decimal ties in ProofAndSetValue (#4615, @jens-maus)
- fix(webui): keep the BidCos-RF input and the integer precision in ProofAndSetValue (#4613, @jens-maus)
- fix(webui): drop METER_CONSTANT_ENERGY from the three decimal branches (#4606, @jens-maus)
- fix(webui): drop floating point residue from converted parameter values (#4602, @jens-maus)
- fix(webui): report success of setEnabledServiceMsg once the setting is stored (#4600, @jens-maus)
- WebUI: Improve system variable editing (#4413, @MichaelN0815)
- fix(webui): skip absent list filters and keep firmware filter order on restore (#4595, @jens-maus)
- fix(webui): restore sticky filters of slowly loading popups and tolerate blocked storage (#4592, @jens-maus)
- fix(webui): restore the string filters without an error when none are stored (#4590, @jens-maus)
- fix(webui): calculate the ESI energy cost from the unrounded kWh value (#4585, @jens-maus)
- fix(webui): correct two unit strings of the unit display patch (#4584, @jens-maus)
- fix(webui): show a humidity of 0 % and hide an invalid valve level in the heating control (#4582, @jens-maus)
- fix(webui): show the valve state of the heating control only when it exists (#4579, @jens-maus)
- fix(webui): remove the leftovers of the field test option in the storage settings (#4574, @jens-maus)
- fix(webui): use the corrected channel highlights in the device database too (#4571, @jens-maus)
- fix(webui): correct the channel highlights of all WRC6 variants (#4565, @jens-maus)
- fix(webui): show the device list filters as entered when reopened (#4561, @jens-maus)
- fix(webui): keep plain text and case in the regex device list filters (#4560, @jens-maus)
- fix(webui): validate the new channel names before renaming all channels (#4558, @jens-maus)
- fix(webui): translate the rename channels confirmation and fix its tooltip (#4552, @jens-maus)
- fix(webui): default the Homematic IP log level to ERROR when it is not set (#4549, @jens-maus)
- fix(webui): mention the Tailscale relays in the VPN help text (#4545, @jens-maus)
- fix(webui): tell that changed network settings need a reboot (#4543, @jens-maus)
- fix(webui): show the system variable move arrows only for existing users (#4538, @jens-maus)
- fix(webui): report internal channels as not writable and keep the empty channel chooser hint (#4533, @jens-maus)
- fix(webui): open the device and channel settings only once the device list is loaded (#4530, @jens-maus)
- fix(webui): keep the program editor origin and require admin rights for the device picture link (#4528, @jens-maus)
- fix(webui): show negated value range conditions in the program list (#4524, @jens-maus)
- fix(webui): pass the session of SendPOSTRequest under its own name (#4520, @jens-maus)
- fix(webui): do not block updates when the free space is unknown (#4513, @jens-maus)
- fix(webui): write the central link template of 0171 like the generated webui.js (#4508, @jens-maus)
- fix(webui): fix the button event to CCU setting of the channel dialog (#4507, @jens-maus)
- fix(webui): keep the translation cache in sync with reloaded texts (#4503, @jens-maus)
- fix(webui): sort missing values first and keep equal rows in natural sorting (#4499, @jens-maus)
- fix(webui): handle zero and southern hemisphere UTC offsets in getPositionData (#4498, @jens-maus)
- fix(webui): fix gateway assignment results and display names of patch 0161 (#4495, @jens-maus)
- fix(webui): fix escaping and roaming state of the gateway assignment (#4493, @jens-maus)
- fix(webui): fix tweaks, response and texts of the advanced settings (#4488, @jens-maus)
- fix(webui): escape the system name and harden the advanced settings (#4484, @jens-maus)
- fix(webui): clear the gateway duty cycle and firmware without status (#4482, @jens-maus)
- fix(webui): translate and harden the gateway duty cycle and firmware columns (#4481, @jens-maus)
- fix(webui): skip devices of interfaces without URL in hm_autoconf (#4477, @jens-maus)
- fix(webui): fix duplicate code and function mapping of hm_autoconf (#4476, @jens-maus)
- fix(webui): fix favorite escaping, user assignment and position sorting (#4473, @jens-maus)
- fix(webui): select system variables in the popup by keyboard (#4468, @jens-maus)
- fix(webui): add the missing row tag of the string variable filter (#4467, @jens-maus)
- fix(webui): correct grouping details of the device firmware dialog (#4465, @jens-maus)
- fix(webui): show the restore config button only to administrators (#4462, @jens-maus)
- fix(webui): use unique row IDs for favorites in several user lists (#4461, @jens-maus)
- fix(webui): escape the object names in the delete confirmation dialogs (#4458, @jens-maus)
- fix(webui): show an error when a control panel popup fails with status 0 (#4453, @jens-maus)
- fix(webui): select the valve positions of the eTRV settings page correctly (#4444, @jens-maus)
- fix(webui): correct the sabotage, heating/cooling and fine dust labels of the maintenance tile (#4441, @jens-maus)
- fix(webui): reject recovery mode when the platform is unknown (#4435, @jens-maus)
- fix(webui): harden the recovery mode API of rootfs patch 0012 (#4434, @jens-maus)
- refactor(webui): remove the remaining ReGa version selection (#4431, @jens-maus)
- fix(webui): show the end of time ranges in program conditions again (#4426, @jens-maus)
- fix(webui): clear the channel list when the control filter matches nothing (#4424, @jens-maus)
- fix(webui): declare the web app manifest icons for general use (#4409, @jens-maus)
- fix(webui): escape single backslashes in user favorite system variables (#4383, @jens-maus)
- fix(webui): reload the system variable list after saving the internal flag (#4376, @jens-maus)
- fix(webui): escape system variable descriptions before adding line breaks (#4368, @jens-maus)
- fix(webui): keep the filler cell of short-press-only keys (#4366, @jens-maus)
- fix(webui): build the install wizard acknowledgement name like the backend (#4362, @jens-maus)
- fix(webui): keep the plain user name for install wizard acknowledgements (#4360, @jens-maus)
- fix(webui): correct spelling of the Tailscale authentication button (#4358, @jens-maus)
- fix(webui): do not fail the UI update for guests without a ReGa save button (#4354, @jens-maus)
- fix(webui): match the serial number filter fallback against the serial number (#4355, @jens-maus)
- fix(webui): check the HmIP-RF duty cycle when BidCos-RF lists no interface (#4349, @jens-maus)
- fix(webui): do not treat add-on warnings on stderr as a failed operation (#4348, @jens-maus)
- fix(webui): keep failed add-on uninstall scripts and survive log errors (#4347, @jens-maus)
- fix(webui): keep extended descriptions working for unknown WGT/WGTC channels (#4343, @jens-maus)
- fix(webui): keep the page content out of the keyboard tab order (#4337, @jens-maus)
- fix(webui): only let administrators change the access level of users (#4332, @jens-maus)
- fix(webui): keep the built-in Admin user an administrator (#4331, @jens-maus)
- fix(webui): include hidden log files in the log file download (#4323, @jens-maus)
- fix(webui): show add-ons with the same name in the sorted add-on list (#4319, @jens-maus)
- fix(webui): save the object model before ending the session on logout (#4297, @jens-maus)
- fix(webui): only resolve a channel ID in setVisible() for the channel dialog (#4283, @jens-maus)
- fix(webui): preserve multiple spaces in string system variable values again (#4280, @jens-maus)
- build(openccu-base): update WebUI Bootstrap from 5.2.3 to 5.3.8 (#4256, @jens-maus)
- Migrate WebUI Script Editor from CodeMirror 5 to bundled CodeMirror 6 (#4207, @jens-maus)
🖥️ Operating System Changes
- bump java-azul to 21.54.201-ca-jre21.0.13.1 (#4762, @jens-maus)
- bump kernel-upstream to 6.18.64 (#4757, @jens-maus)
- bump tailscale to 1.104.7 (#4732, @jens-maus)
- build: do not restore file owners from source archives (#4702, @jens-maus)
- rpi: Update rpi-kernel (stable_20261103) and rpi-firmware (ab5c7f86) to 6.18.60 (#4644, @jens-maus)
- fix(addons): write the addon update list atomically (#4622, @jens-maus)
- fix(firewall): propagate errors from setfirewall.tcl (#4489, @jens-maus)
- refactor(ntp): simplify plausibility check in restoreSystemTime.sh (#4292, @jens-maus)
- refactor(base): select components and consolidate recovery services (#4237, @jens-maus)
- add multi-color LED support for RPI-RF-MOD (#4204, @jens-maus)
🔄 Other Changes
- bump rpi-eeprom to 2026-11-17 (RPi4) and 2026-11-16 (RPi5) (#4760, #4750, @jens-maus)
- bump buildroot to 2026.08.2 (#4758, @jens-maus)
- build(libopenssl): switch to OpenSSL 3.5 LTS and fix lighttpd's EOL check (#4746, @jens-maus)
- fix(install-proxmox): avoid RAM-backed tmpfs and explain failures (#4740, @jens-maus)
- docs(hss_led): document free colors and brightness of the radio LED (#4718, @jens-maus)
- feat(rpi): light the RPI-RF-MOD status LED yellow from power-on (#4714, @jens-maus)
- fix(rpi5): enable CONFIG_BCM2712 in U-Boot (#4712, @jens-maus)
- fix(rpi-eeprom): report a bootloader update only for a newer image (#4710, @jens-maus)
- feat(rpi): enable the memory cgroup controller on the Raspberry Pis (#4703, @jens-maus)
- fix(xe-guest-utilities): add the files the systemd install step refers to (#4694, @jens-maus)
- build(ova): select host-qemu explicitly for qemu-img (#4695, @jens-maus)
- ci(release): add the OpenCCU-Base component changes to the release notes (#4641, @jens-maus)
- docs: forbid AI attribution in issue and pull request comments (#4610, @jens-maus)
- fix(rpi3): do not start USB in U-Boot on every boot (#4597, @jens-maus)
- build: drop init scripts of deselected optional packages (#4568, @hobbyquaker)
- bump qemu-guest-agent to 11.1.3 (#4580, @jens-maus)
- fix(rpi): bounce dwc_otg IN transfers of a length not a multiple of 4 (#4572, @hobbyquaker)
- build(deps): bump body-parser from 2.3.0 to 2.4.0 in /home-assistant-addon-proxy (#4534, @dependabot[bot])
- docs(led): describe the disabled= field of the hss_ledctl status (#4451, @jens-maus)
- build(deps): bump proxy-addr from 2.0.7 to 2.0.8 in /home-assistant-addon-proxy (#4400, @dependabot[bot])
- docs: add AGENTS.md as single source of agent instructions (#4393, @jens-maus)
- docs: report bugs in eQ-3 CCU components in the OpenCCU issue tracker (#4359, @jens-maus)
- Update wiki links and use the term App for Home Assistant (#4356, @jens-maus)
- Add generator and workflow for the supported devices wiki pages (#4345, @jens-maus)
- Sync RPi usb-storage UAS quirks with HAOS (#4313, @jens-maus)
- Use real upstream versions in dependency update PR titles (#4308, @jens-maus)
- chore: disable automatic attribution in commits and pull requests (#4267, @jens-maus)
- recovery(rpi3): cap initrd relocation for Pi Zero 2 W recovery boot (#4220, @jens-maus)
📝 Support:
For support on installation and help please visit the following web pages:
OpenCCU - Documentation 🇺🇸
OpenCCU - Discussions 🇺🇸
OpenCCU - Dokumentation 🇩🇪
OpenCCU - Forum 🇩🇪
📦 Download:
The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):
-
RaspberryPi5 Model B – (installation):
📦 OpenCCU-3.89.14.20261121-rpi5.zip
SHA256: 7a96d3dc1241b7a362cab6f0651b66dad8868572eb3ccc3eb73913b10cd1bec6 -
RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
📦 OpenCCU-3.89.14.20261121-rpi4.zip
SHA256: 01211c87ce26416b79250c5fd7e3dbdecc349de64349ad9c5b035d3ad3f7e87f -
CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
📦 OpenCCU-3.89.14.20261121-rpi3.zip
SHA256: ee90c964b23ab555996a6e6ceb6b1cfaf4bebf1220a71c19eee7a3355029663d
📦 OpenCCU-3.89.14.20261121-ccu3.tgz (only for initial CCU3 Firmware -> OpenCCU Upgrade)
SHA256: d30b54087eac010b52a7099160fa70e23cdba54839eb2abca5e494868b4c82d1 -
ODROID-N2/N2+/C4/C2 – (installation):
📦 OpenCCU-3.89.14.20261121-odroid-n2.zip
SHA256: a490c5616d0826435a99c805e49198759adbe5e73e5a7bebccf61e8316a476ba
📦 OpenCCU-3.89.14.20261121-odroid-c4.zip
SHA256: cf11333e4b9fb7d0932e30613dacf5a899c87b2a8efc7dd1408d88095007324b
📦 OpenCCU-3.89.14.20261121-odroid-c2.zip
SHA256: b244d497a0b2b2a7a832e4dcbfa319d765a2273bb2dd768476d6755561517ab1 -
ASUS Tinkerboard 2/2S – (installation):
📦 OpenCCU-3.89.14.20261121-tinkerboard2.zip
SHA256: 43bf93eaaf23d49af9dc8381b8b26be8a6df771e9f52b5dc6f6d24874f2a84ad -
Generic-x86_64 – (installation):
📦 OpenCCU-3.89.14.20261121-generic-x86_64.zip
SHA256: 379c5c1e8ddfa83e6f8e27721803836bebf486bbdcec188bf40e558c596e2f99 -
Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
📦 OpenCCU-3.89.14.20261121-ova.zip
SHA256: 594440932645363fa173b5de3f6aa5c1f291125c3eeca8d89167333bf706107e
📦 OpenCCU-3.89.14.20261121.ova (only for initial OVA installation)
SHA256: 1b147626bb8b0271f94e0e3efdb829db3982fb5c2ebf551bfa4c556e821a3044 -
Docker / Open Container Initiative (OCI) – virtual appliance (installation):
📦 OpenCCU-3.89.14.20261121-oci_amd64.tgz (amd64/x86_64)
SHA256: ec5180d167e61509b82938152453229304ba75350cfdd754e6cce27d4f4e297d
📦 OpenCCU-3.89.14.20261121-oci_arm64.tgz (arm64/aarch64)
SHA256: 879fc4a04cd67de0273684e36cb23f66f33c2cc33d9a2e24de5f82af41cadfe4 -
LXC Container – virtual appliance (installation):
📦 OpenCCU-3.89.14.20261121-lxc_amd64.tar.xz (amd64/x86_64)
SHA256: 721bf798e79120a19731cc9bb2a73631d2ebf1bf17a65d3d1353f2d50651007c
📦 OpenCCU-3.89.14.20261121-lxc_arm64.tar.xz (arm64/aarch64)
SHA256: f9737c3b077a5f82ad80508825dcf307605d42ed6b1017190be0dd5b7e15fb9f -
Generic-aarch64 Appliance – (ProxmoxVE):
📦 OpenCCU-3.89.14.20261121-generic-aarch64.zip
SHA256: d45cb5d082eb3a28dfdd1287bec42ed1f22d5ab6ab7e1ca8241fdbfb61247862 -
Kubernetes / K8s – virtual appliance:
see install documentation -
Home Assistant App – virtual appliance:
see install documentation