GR Mod 0.8.13

改动

• 只需设定一种语言。 设定中只保留[界面语言]（简体中文 / English / 跟随系统），不再单独选择照相机语言：照相机菜单的语言跟随界面语言，影像控制中更改的名称将应用于这一语言；跟随系统时，使用与系统相同的照相机语言。
• 影像控制的引导逐项介绍附加功能。 原来一步中的全部说明，改为先概览，再逐项介绍柔焦、拍摄时间戳、黑白风格、直闪模式、HDR 增益图、曝光预览开关、ADJ 栏目数和显示屏自动亮度。
• 手机版并入同一版本发布。 桌面版、Android 版和 iPhone / iPad 版的代码现在都在同一个 main 分支中。

注意

• 恢复官方固件前，请先重置照相机的设定。 GR Mod 固件在照相机中保存了官方固件无法识别的设定（例如选中的新增影像控制或长宽比），直接写入官方固件后，照相机可能在开机时自动关闭。请在仍使用 GR Mod 固件时，在照相机菜单 › [设定]（扳手）› [重设]中执行[重设为出厂默认设置]，然后再写入官方固件。影像控制页面的[写入原厂固件]会在写入前提示这一步。
• 本版未修改固件的内容；已写入 0.8.12 固件的照相机无需重新写入。

手机版（Android / iPhone / iPad）

• Android：下载 GRMod-Android-0.3.8.apk 并安装（Android 10 及以上）。
  • 从 0.3.8 起，App 内即可更新：有新版本时会提示，点[更新]即可下载并安装（首次需要在系统设定中允许 GR Mod 安装应用）。
  • 0.3.8 改用 GR Mod 的正式签名。如果手机上装过 0.3.7 或更早的测试版，请先卸载再安装 0.3.8（卸载会清除 App 中的设定）；之后的版本可直接在 App 内更新。
• iPhone / iPad：在 App Store 下载「GR Mod - For Ricoh GR IV/III」：https://apps.apple.com/app/id6834232648
• 手机版的页面与桌面版相同；可将固件存储到设备，或通过 Bluetooth® 和无线局域网直接推送至 GR IV 系列照相机，无需存储卡。

Mac 版

GRMod-0.8.13-mac.dmg（或 GRMod-0.8.13-mac.zip）：Intel 芯片 macOS 10.13 及以上，Apple 芯片 macOS 11 及以上。打开 dmg（或解压 zip）后，将 GR Mod 拖入[应用程序]文件夹；首次打开时如果被系统阻止，请在[系统设置] › [隐私与安全性]中单击[仍要打开]。

English

Changes

• One language setting. The settings keep only App language (简体中文 / English / Follow system); the camera language is no longer chosen on its own. The camera menu follows the app language, and the names changed under Image Control are for that language; following the system, for the camera language matching the system's.
• The Image Control guide introduces the additions one by one. What was one step is now an overview followed by a step each for soft focus, date imprint, B&W looks, Direct Flash, the HDR gain map, the exposure preview switch, the ADJ lever items and auto screen brightness.
• The phone and tablet app ships with the same release. The desktop, Android and iPhone / iPad apps now live on the same main branch.

Notes

• Before going back to the official firmware, reset the camera's settings. GR Mod's firmware keeps settings in the camera that the official firmware does not know (for example an added Image Control look or aspect ratio being selected); written straight over them, the official firmware can switch the camera off while it starts. While still on GR Mod's firmware, run Camera menu › Setup (wrench) › Reset › Reset to Factory Default, then write the official firmware. "Write factory firmware" on the Image Control page asks about this before it writes.
• The firmware itself is unchanged; cameras with the 0.8.12 firmware need not be written again.

Phone and tablet app (Android / iPhone / iPad)

• Android: download GRMod-Android-0.3.8.apk and install it (Android 10 or later).
  • From 0.3.8 the app updates itself: a new version is offered, and Update downloads and installs it (the first time, allow GR Mod to install apps in the system settings).
  • 0.3.8 is signed with GR Mod's own key. If 0.3.7 or an earlier test version is on the device, uninstall it before installing 0.3.8 (uninstalling clears the app's settings); later versions update from inside the app.
• iPhone / iPad: "GR Mod - For Ricoh GR IV/III" on the App Store: https://apps.apple.com/app/id6834232648
• The same pages as the desktop app; it saves the firmware to the device, or sends it to a GR IV family camera over Bluetooth and Wi-Fi, no card needed.

Mac

GRMod-0.8.13-mac.dmg (or GRMod-0.8.13-mac.zip): Intel Macs with macOS 10.13 or later, Apple silicon with macOS 11 or later. Open the dmg (or unzip the zip) and drag GR Mod into Applications; if macOS blocks it the first time, click "Open Anyway" in System Settings → Privacy & Security.

SHA-256

• GRMod-0.8.13.exe：0f6c6b415ebffdceee0fc0397c4ebf28da5f0279084961ceaa43b4bc82a469d4
• GRMod-0.8.13-mac.zip：d0a4869b51cc172b15b6ef823fa4aa0c016091b70f0e27590a33da84635df76e
• GRMod-0.8.13-mac.dmg：66ac76e468df0028bcc49df7a9d28e9f316c113136fb0fa2baa058ec350f9905
• GRMod-Android-0.3.8.apk：f648aa4476996dd7a1aa7e1ab9e970f1d1e9fd7ce7a266c88bc1c50ccfcbfd23