github MaxGramser/homeassistant_espscreen screens-v0.4.99
Tessera 0.4.99 · firmware 0.62.0

one hour ago

Tessera 0.4.99 · firmware 0.62.0

A fix first: the large ESP32-P4 screens draw every change whole again. Also builds with ESPHome 2026.11, an alarm keypad you can hit while the siren goes, and sensors that start as a meter.

Fixed

  • A screen draws every change whole again. On the ESP32-P4 boards (the Guition and Waveshare 10.1 and 7 inch, the reTerminal D1001, the Tab5) a card that opened, a change of Dark mode or a page could reach the glass only in part since 0.4.98: the frame or a few blocks turned while the rest stayed as it was. The pictures of whole pages these screens kept to show a page sooner read the screen's memory in a way that could throw away what had just been drawn. They are gone. A page turn is drawn as before 0.4.98, which takes a moment longer on a 10-inch, and the memory they held goes to covers and cameras again.
  • Screens build with ESPHome 2026.11. ESPHome Device Builder's newest ESPHome, with LVGL 9.6, stopped every screen's build. The firmware now builds with it as with the older ones. The ESP32-P4 boards with echo cancelling still wait for their audio library to build there: build those with ESPHome 2026.10 or older, as the app does.
  • Echo cancelling builds with ESPHome 2026.10 (#434), and an icon of your own that a board with sound already has no longer breaks the build (#432).
  • Wi-Fi secrets shared with Home Assistant are found (#351), and an Android TV remote that reports no state keeps its keys (#387).
  • A plugin built elsewhere no longer shows as not running.

New

  • A keypad you can hit while the siren goes. The keys for an alarm's code take all the room of the card, the screen opens the keypad at once on red when the alarm goes off, and a Delete key takes back the last digit.
  • Your alarm has its own place under Events: which screens open the keypad by themselves, and a code that sends itself after 4 to 8 digits.
  • Sensors start as a meter, in the look that suits them, with a tip to choose the graph or a plain value instead.
  • Layoutbot restructures your own tiles into sections by room and kind, keeping your names, icons and looks.
  • Plugins in the library, as a kind of their own right under All.
  • Clean up build files in Settings, about 1 GB per screen (#410).

Tested

The fix was found and proven on a Guition 10.1 and a 4-inch Guition on a test Home Assistant, with plugins, a screensaver, live cameras, covers, sections and Home Assistant frozen and restarted, by reading the glass back after every change, and checked by hand on both screens after the change. The firmware was built for those two boards with ESPHome 2026.9.0, for a 4-inch Guition with ESPHome 2026.6.2 and 2026.11.0, and the project's C++ and Python tests pass. The build of every board on both ESPHome versions runs after this release went out.

How to get it

Update Tessera Screen Manager in Home Assistant, then use Update on each screen in Tessera for the new firmware.

Don't miss a new homeassistant_espscreen release

NewReleases is sending notifications on new releases.