github MaxGramser/homeassistant_espscreen screens-v0.4.98
Tessera 0.4.98 · firmware 0.61.0

49 minutes ago

Tessera 0.4.98 · firmware 0.61.0

A large release: calls between your screens, sections on a page, a first layout made for you, Layoutbot, and page turns that come back at once on the large screens.

New

  • Call between your screens. On an ESP32-P4 screen with a microphone and a speaker, a Call tile opens the list of your screens or calls one screen at once, with or without video. The called screen rings and shows who calls. A switch per screen turns the ringtone off, and Do not disturb refuses calls. The ringtone, Do not disturb and voice switching are switches of each screen: on the screen's own settings page under Extras, in the app under Screen settings and in Home Assistant. Video in a call needs the Screen camera plugin with its part Video on both screens; without it a call is sound only, and the Call tile's settings in the editor say so.
  • Echo cancelling in a call. The Guition ESP32-P4 panels and the reTerminal D1001 now take their own speaker's sound back out of the microphone, as the Waveshare P4 boards and the Tab5 already did, so you do not hear yourself come back and both sides can speak at once. Measured on a Guition 10.1 and a reTerminal D1001: 16 to 46 dB of echo taken away, with a voice beside the board keeping its level while the other side speaks. It works only while a call or the doorbell's Talk needs it. Two small keys in the call turn echo cancelling and voice switching off and on for both screens. At the top volume a Guition's small speaker distorts and the canceller does little; voice switching is there for that. The Guition 7 inch and 4.3 inch have the same codec and get it unmeasured.
  • Talk back to the doorbell. With Home Assistant's two-way audio (2026.11 and later) the doorbell's view has a Talk key.
  • Sections on a page. On a screen with 8 MB of flash or more, tiles can stand together in a section with a title, an icon and one entity's state.
  • A first layout made for you. A new screen asks whether to make a first layout, and Auto layout does it for any screen from your Home Assistant areas and devices.
  • Layoutbot. With an AI integration that has AI Tasks in Home Assistant, a small bot in the editor arranges pages from a sentence, on a phone too.
  • Pages you have seen come back at once on an ESP32-P4 screen. The screen keeps a picture of the pages you have seen, so a turn back to one takes about 50 ms instead of a quarter of a second.
  • Pages loop, a to-do card, light presets, icons of your own per screen, and for plugins: a place of Home Assistant in a web request, photos, a tile that fills its card, and more (plugin API 0.28).
  • The Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1 with the newer chip is its own board in New screen.

Fixed

  • A 10.1 inch screen with a large layout, plugins and a page of live camera tiles could restart with a stack overflow when a page opened.
  • A screen's video in Home Assistant showed nothing after the screen was removed and added again, and on Home Assistant 2026.11 its camera sat on a second device. Install Video in Home Assistant again under Settings and restart Home Assistant once.
  • A weather card of an entity without hourly forecasts offered an empty Hourly view.
  • Pages no longer redraw when the app restarts or updates, a meter keeps its icon, the same album cover is not fetched again, a camera tile leaves nothing behind on the next page, and a call always lets you out when the app restarts in the middle of it.

Tested

The whole check of the project on the released commit, and an update on a Home Assistant with a Guition 4 inch, a CYD, a Guition 10.1 and a reTerminal D1001: every screen took the new firmware over Wi-Fi and kept its layout, and the app then updated from 0.4.97 with its screens and layouts intact. Calls were run between the Guition 10.1 and the reTerminal D1001, with the echo measured from a computer playing the far end. The call settings on the screen's own settings page came after that update: they were built for a Guition 10.1 and the three 4 MB boards and pass the project's tests, and were not looked at on a screen. The firmware was built for those boards and a Waveshare 10.1; the build of every board on both ESPHome versions was still running when this went out.

How to get it

Update Tessera Screen Manager in Home Assistant, then use Update on each screen in Tessera for the new firmware.

Don't miss a new homeassistant_espscreen release

NewReleases is sending notifications on new releases.