Tessera 0.4.84 · firmware 0.52.0
Every picture at its tile's full size (#183)
A camera, an album cover, a favourite and a map now each load their own picture, at their own pace. Before, the pictures of a page came as one image: on a large screen every picture of the page came smaller with a dark edge as soon as a player on that page started to play, and every new song sent all the cameras of the page again. Now a new song replaces only its cover, and a page with several cameras shows each one at the full size of its tile.
A camera's picture is also newer: the app fetches it just before the screen loads it, so it is a fraction of a second old. The 10-inch and the other screens with 32 MB of memory show a camera over the whole page, the camera full screen and the screensaver at the glass's own pixels.
Every picture on the screen now goes one way. What is on the glass loads first, an alert before everything, and a picture nobody wants any more stops loading at once, so turning pages fast leaves nothing behind.
The media card (#177)
- A new track changes the card in one go, once its cover is here, without the flash of a black card and an empty square.
- A radio station shows "Live" with an empty bar.
- Covers keep coming after many tracks: an old cover makes way for a new one.
- More room around the volume knob and the track's bar, and the play key's triangle stands in the middle.
Favourites
- A Spotify link makes a favourite. Paste a link from the Spotify app (Share > Copy link) in a favourite's picker. That reaches what Home Assistant's library never lists, such as Discover Weekly and the Daily Mixes.
- Shuffle and repeat can be set on a favourite, as it starts.
- The ring of a favourite that plays sits on the tile and no longer moves its picture.
- Choosing what a favourite plays works again in the editor.
And more
- Zoom and move a map full screen with + and - keys and four arrows.
- Every page turns as quickly as the next: a screen with PSRAM keeps every page of its layout ready.
- The energy card shows the grid on Home Assistant 2025.12 to 2026.2, opens the sum of several solar or grid sensors on a tap, and its dots run smoothly. A new value no longer holds the screen for a third of a second.
- A slider on a lamp that is off shows a faint fill under your finger while you drag.
- Try dev before a release (#180): add the repository with
#devat the end of its URL for a second Tessera that builds from dev. docs/RELEASING.md, "Testing dev", says how.
Tested
Every Python, C++, editor, translation and WASM preview check, renders of the real firmware on the CYD, the 4-inch Guition and the 10.1-inch Guition, and firmware builds of every board on ESPHome 2026.9.0 and 2026.6.2. The CYD uses 91.5 % of its update slot. The upgrade from 0.4.83 was tested on a CYD, a 4-inch Guition and a Waveshare 4.3-inch: the new app with the old firmware, then each screen's own Update, and on the CYD the other order (the old app installing the new firmware). Every layout came through unchanged, and pages, taps, cards, settings and standby were checked on the glass.
A layout that uses a favourite's new shuffle or repeat can't be read by an older app, so after this update, go back to 0.4.83 only with a backup taken before it.
Update
Update the Tessera app, then use Update on each screen in Tessera.