- The media card plays on the colours of its cover. The card of a media player sits on a ground taken from the
cover that plays, with the speaker it plays on at the top: tap it to move the music to another one. Shuffle, repeat
and a bar you drag through the track are under the title, where the player has them. - Your library on the screen. The library key on the card opens what Home Assistant can browse on that player,
folder by folder (playlists, artists, albums and the rest), down to a page of covers with page dots for up to 48 of
them. A tap on a cover plays it on the speaker the card shows. Nothing is made for one service: it is the player and
its library as Home Assistant reports them. - Favourite tiles. A media player tile can be a favourite now (Display → Favourite): choose a playlist, album or
artist from the player's library in the editor and, if you like, the speaker it plays on. A tap starts it; the
favourite shows its cover behind its name, a play key, and a ring while it plays. Its picture waits with the same
spinner as every picture card. - Spotify at rest keeps its card (#88). A Spotify player that plays nothing still offers its library and its
speakers, so you choose a speaker and start from the screen, where the card used to have no keys at all. - Cover is the default for a new media tile on a screen that shows pictures. Tiles you already have stay as they
are; on the CYD and the other screens without pictures nothing changes. - The covers and the library need a screen with the memory for pictures. The CYD keeps the card on its cover colours,
the speakers and the favourites, drawn with icons. - Tested: on a Guition and a CYD on the bench with Spotify through Home Assistant: the card, the speakers, the
library, favourites, an alert camera and a camera full screen while covers load, and on the CYD 47 tiles through
restarts and resets. The CYD image is 92.9 % of its slot, 25 KB more than firmware 0.23.0.
Also in this release: 0.4.41 (firmware 0.23.0)
- The editor draws what the screen draws, to the pixel. A new check compares the editor's sizes and colours with
the firmware's own code on every board, and it found five places where the editor was slightly off:- a lamp's colour on its tile, by one step in a few thousand colours;
- a battery without a charge, which the editor showed red at 0 % where the screen shows no charge;
- the widths of cards on a five-column screen such as the 10.1-inch Guition, where a column could be a pixel wider;
- the home mark in the top bar of the 7-inch Waveshare, Waveshare 7B and Sunton screens;
- a tall tile offered on a grid too small to hold it.
- Firmware 0.23.0 tidies the code, with nothing new on the glass. The alarm panel, the lock and a light's effects
page now read Home Assistant's feature flags by their names from the tile catalogue, as the rest of the firmware
already did. Update when it suits you. - For contributors: the documentation now describes the project as it is built today, with an index in docs/README.md
and a list per recipe of every place a change touches. New checks keep the editor and the firmware in step, test
every tile type on every board, keep the flash of every 4 MB board within budget, and compare the tile catalogue with
each new Home Assistant release every week. On the oldest ESPHome the packages support, a change for every board now
builds one board instead of four. - Tested: the CYD, both Guitions and the Waveshare 7 build with ESPHome 2026.9.0 (the CYD image is 1,678,864 B, 91.5 %
of its slot, the same as firmware 0.22.0), and the CYD, the Guition 4848S040 and the Waveshare 7 with 2026.6.2.
Credit. The media player and Spotify work in this release follows @woozer's pull request #87. Thank you!