github Mastershort/neonplan3d v1.10.0

latest releases: v4.0.0, v3.5.2, v3.5.1...
one month ago

Neu

  • Dachschrägen mit Kniestock: Liegt die Wandoberkante einer Dachfläche unter der Deckenhöhe des Geschosses darunter, enden dessen Wände an der Dachunterseite – Kniestock an der Traufe, Giebel bis zum First, Innenwände an der Schräge; Fenster bleiben darunter. Gestrichelte Kopfhöhen-Linien (1,5 m, 2 m) im Grundriss-Editor (nach mindmonks Beschreibung in PR #66, Diskussionen #64, #75).
  • Dach bleibt: ein Schalter in der Ansichtsleiste (und die Karten-Option roof_fade: false) lässt das Dach beim Heranzoomen auf dem Haus; im Editor bleibt es im Werkzeug Dach und Energie immer.
  • Dachfenster: Fenstermotor (Velux, Roto, Fakro als Cover) öffnet den Flügel so weit, wie er steht; ein Name; der Rahmen leuchtet warm, wenn offen oder gekippt; in einer Dachfläche schneidet das Fenster ein Loch in die Schräge (Diskussion #47, PR #66 von mindmonk).
  • Gauben und Zwerchgiebel: „+ Gaube“ im Formular einer Dachfläche setzt eine Gaube auf die Schräge (Sattel oder Pult); ihre Tiefe endet, wo ihr First auf die Schräge trifft, die Fläche öffnet sich nur dort, wo das Gaubendach darüber liegt (Kehlen), Wangen schließen seitlich, die Dachgeschoss-Wand steigt bis zur Gaube – dort passt das Gaubenfenster. Eine breite Gaube mit Traufe auf der Wandoberkante ist ein Zwerchgiebel (Drei-Giebel-Haus). Wo sich Dachflächen überlappen, ist das höhere Dach die Decke (Diskussion #75, PR #66 von mindmonk).
  • Dachformen: Krüppelwalm, Zeltdach, Mansarddach und Flachdach mit Attika kommen zu Sattel, Walm, Pult und Flach dazu; Dachgeschoss-Wände enden auch unter Walm-Enden und geknickten Flächen (Diskussionen #90, #74, #47).
  • Flachdach als freie Form: „Umriss des Geschosses übernehmen“ gibt einer Flachdach-Fläche den Umriss der Räume (L, Z, U …) als eine Fläche ohne Kanten; die Ecken lassen sich ziehen (#108 von rolandarends).
  • Rollläden an Türen: Haustür, Terrassentür und Schiebetür nehmen jetzt auch ein Cover; der Rollladen fährt davor und lässt sich wie am Fenster bedienen (#114 von denisb88).
  • Etage verschieben: „Etage verschieben“ im Etagenformular rückt alles auf der Etage um X und Z (#25 von morbidos123).
  • Wand teilen: ✂ im Kasten Wandhöhen teilt eine Wand an einem eigenen Punkt – so hat eine Wand in einer Flucht zwei Höhen (2,5 m neben 1,7 m); der Teilpunkt lässt sich verschieben und entfernen (#109 von rolandarends).

New

  • Roof slopes with knee walls: when a roof section's top of walls lies below the ceiling of the floor underneath, that floor's walls end under the roof – knee walls at the eaves, gables up to the ridge, inner walls cut by the slope; windows stay below it. Dashed headroom lines (1.5 m, 2 m) in the plan editor (after mindmonk's description in PR #66, discussions #64, #75).
  • Roof stays: a switch in the view bar (and the card option roof_fade: false) keeps the roof on the house while zooming in; in the editor's roof and energy tools it always stays.
  • Roof windows: a window motor (Velux, Roto, Fakro as a cover) opens the sash as far as it stands, a name, a warm glow while open or tilted, and a hole in the slope of a roof section so the attic looks out (discussion #47, PR #66 by mindmonk).
  • Dormers and cross gables: "+ Dormer" in a section's form puts a dormer on a slope (gable or pent); its depth ends where its ridge meets the slope, the slope opens only where the dormer's roof lies above it (valleys), the cheeks close it, the attic wall rises up to it for the dormer window. A wide dormer with its eaves on the top of walls is a cross gable (a three-gable house). Where sections overlap, the higher roof is the ceiling (discussion #75, PR #66 by mindmonk).
  • Roof shapes: half-hip, pyramid, mansard and flat with parapet join gable, hip, pent and flat; attic walls end under hipped ends and broken slopes as well (discussions #90, #74, #47).
  • Flat roof as a free shape: "Take the floor's outline" gives a flat section the outline of the floor's rooms (L, Z, U …) as one surface; its corners can be dragged (#108 by rolandarends).
  • Roller shutters on doors: a front door, French window or sliding door takes a cover too; the blind comes down over it and can be moved like a window's (#114 by denisb88).
  • Shift a floor: "Shift the floor" in the floor form moves everything on the floor by X and Z (#25 by morbidos123).
  • Split a wall: ✂ in the wall heights box cuts a wall at a point of your own, so one wall in line can have two heights (2.5 m next to 1.7 m); the split point can be moved and removed (#109 by rolandarends).

Don't miss a new neonplan3d release

NewReleases is sending notifications on new releases.