MarlinFirmware/Marlin 1.1.0-RC4

1.1.0-RC4 "Earnest Ewok"

on GitHub

Commits since 1.1.0-RC3
All commits since 1.0.2-1
Top Contributors

CoreXY and CoreXZ:

• #3127: XY BABYSTEPPING for CoreXY and CoreXZ
• #2995: Add CORE support to st_get_position_mm (and elsewhere)

Hosts, GCode:

• #3109: Add "Host Keepalive" (enabled by default) to inform hosts when Marlin is busy
• #3219: Send position to hosts after some commands.
• #2983: Remove "ok" from the output of M280, M301, M304, M851
• #3052: Fix "M145" output in M503 report
• #3108: Improved handling of M110 for hosts
• #2985, #2987, #3051, #3044, #3027, #3111: Many more fixes for GCode handling

LCD Controllers and SD cards:

• #3114: Option to reverse the click-wheel direction in menus
• #3202: M303 PID Autotune from the LCD menu, applying the result
• #3156: Fix CardReader::lsDive()
• #3157: Use variable in lcd_erase_line()
• #3151: Update the pt-br translation
• #3116: Fix value edit click bugs
• #2989: Blink XYZ on display when positions are uncertain
• #2942: Better number format for editing Delta Jerk and Z Steps
• #2973: Update splash screen with current no-domain
• f18d3f4: LCD-based movement better-constrained for Deltas (#1869)

Minor bugs:

• #2902: Fix Z min endstop stepper.cpp
• #3161: Fix initial extruder direction for second/third/fourth extruder if they run inverted to the first
• #3050, #3126: Fix stack overflow issue with many LCD movements
• #3132: Fix a bad "heating failed" error when starting to reheat a warm extruder
• #3092: Fix Printrboard with LCD
• #3077: Prevent a kill() from rebooting with USE_WATCHDOG enabled
• #3066: Fix disable_all_heaters() for MAX6675
• #2848: Fix Rigidbot LCD Panel Support
• #2821: Fix status LEDs update when reinitializing the display
• #3222: Fix endstops disabling after homing, even without ENDSTOPS_ONLY_FOR_HOMING
• #3197: Fix conflict between servos and PWM current control
• #3177: Save all M665 parameters in EEPROM

Homing, Bed Leveling:

• #3164: Fix #3160 - MESH_BED_LEVELING broke correct G1 movement in Z
• #3107: MIN_Z_HEIGHT_FOR_HOMING replaces Z_RAISE_BEFORE_HOMING
• #3107: Adjustments to Z Raise options for probes and homing
• #3102: Bugfix: G28 was lifting Z-axis multiple times
• #3013: Enhanced #3010 - formal Mesh/Manual dependency
• #3057: Fix Z_RAISE_AFTER_PROBING for non DELTA printers
• #3001: Fix Z-raise order with Z_SAFE_HOMING
• #2978: Apply Auto Bed Leveling matrix when switching extruders
• #3089: Fix raise_z_for_servo for Z offsets below the nozzle
• #3124: Update the bed topography output in G29

New Hardware Support:

• #3112: Formal support for the MAX31855 thermocouple
• #3182: Support for Printrboard Rev F
• #3086: Support for multiple PWM fans (for extruders)
• #3201: Hephestos configuration improvements

New and Experimental Features:

• #3069: Very New support for DELTA with M48 Probe Repeatability Test
• #3043: Example configuration for Kossel XL
• #2976: Move the experimental Configurator to its own repository

Configurations:

• #2988: Automatically assign the next open E connector for Y2/Z2
• #3131: Allow override of PWM_MOTOR_CURRENT in configuration
• #3105: Much cleanup of configuration descriptions and code comments
• #3053: Improve description for nozzle-to-probe offsets
• #2986: Enable USE_WATCHDOG by default
• #3031: Fix board type for Hephestos: RAMPS 1.4
• #2868: Fix AUTOTEMP documentation in configs
• #3018: K8200: sample config back in sync

And...

• Many cleanups to the code: #2974, #2992, #2994, #3005, #3024, #3067, #3090, #3101, #3119, #3121, #3123, #3140, #3146, #3147, #3149, #3150, #3153, #3199
• Lots of language improvements: #3180, #3192, #3194, #3217