L×Box v2.20.11
Routing rules now travel between devices as a file: pick the rules, optionally
bundle the DNS servers and DNS rules they depend on, save or share. On the
receiving side a preview shows what will be added and what was healed. The
diagnostic dump also grew teeth — OOM snapshots now carry their full bodies, so
one upload is enough to open a heap profile.
Правила роутинга теперь переносятся между устройствами файлом: выбираете Until now a single rule could not leave the device. A full backup carried The Routing screen's app bar grew a ⋮ menu, visible on the Rules tab:
Export starts with nothing selected — one tap on Select all if you mean all A rule is often useless on its own. "Gemini via my own DNS" points at a DNS Preset-backed servers are deliberately absent from that list. The app creates The file is data from another device, so nothing is trusted blindly. The Identity is regenerated on arrival, so importing the same file twice makes A backup file offered to the rule importer (or a rules file offered to backup Core updated to This is the first lx.2x bump that is not API-neutral — OOM snapshots now carry their bodies. A field dump showed 514–552 MB RSS The five freshest snapshots now travel whole: Reading a profile back from a dump:
The cost is about 1–1.3 MB of base64 on top of a ~2 MB dump. Files this version До сих пор отдельное правило не могло покинуть устройство. Полный бэкап тащил В шапке экрана «Маршрутизация» появилось меню ⋮, видимое на вкладке Экспорт стартует с пустым выбором — один тап по «Выбрать все», если нужны Правило часто бесполезно само по себе. «Gemini через свой DNS» ссылается на Серверов, которые создают пресеты, в этом списке намеренно нет. Приложение Файл — данные с чужого устройства, поэтому на слово никому не верим. Превью Идентификатор при импорте выдаётся новый, поэтому повторный импорт того же Файл бэкапа, скормленный импорту правил (и наоборот, файл правил — Ядро обновлено до Это первый бамп в линейке lx.2x, который не нейтрален к API: в OOM-снимки уезжают в дамп целиком. Присланный дамп показывал 514–552 МБ Теперь пять свежайших снимков едут полностью: Как прочитать профиль обратно:
Цена — около 1–1,3 МБ base64 поверх дампа в ~2 МБ. Файлы, которых эта версия
правила, при желании вкладываете DNS-серверы и DNS-правила, от которых они
зависят, — сохраняете или отправляете. На принимающей стороне превью
показывает, что добавится и что было подлечено. Диагностический дамп заодно
поумнел: OOM-снимки уезжают в него целиком, и одной выгрузки хватает, чтобы
открыть heap-профиль.
🇬🇧 English
✨ Export and import routing rules
everything at once and restored whole categories — useful for moving to a new
phone, useless for "here, take my Gemini rule".
Item
What it does
Export rules...
full-screen picker → save or share one JSON file
Import rules...
pick a file → preview with checkboxes → add the chosen ones
of them. Saving reuses the sheet you know from backup: Save to file (system
save dialog), Save to Downloads, or Share.
The second step: DNS
server the recipient has never heard of. So after picking the rules there is a
second screen, Include DNS, with two sections — your DNS servers and your
DNS rules. Servers referenced by the selected rules that are not part of the
app's template are pre-checked: those are exactly the ones the recipient
would be missing. Everything else is off by default.
and removes them itself when a preset is enabled, so they arrive with the
preset, not with the file.
What happens on import
preview names every repair before you confirm:
In the file
On import
Channel that does not exist here
switched to vpn-1, rule arrives disabled, warning shown
DNS server that does not exist here
DNS option turned off (Force IPv4 survives), warning shown
Resolver that does not exist here
reset to auto
.srs rule
arrives disabled — tap ☁ to download, then enable
Preset unknown to this version
rejected with a reason, the rest still imports
An entry of an unknown kind
skipped, the rest still imports
DNS server/rule you already have
greyed out as "Already on this device" — your settings are never overwritten
copies ( (2) in the name) instead of colliding. A rule and the DNS server it
needs, travelling in one file, are linked without any healing at all.
restore) is rejected with a message that says where it actually belongs.
🔧 Under the hood
sing-box-lx v1.14.0-lx.27-rc.2. The fix that matters:
a dead detour node no longer freezes the network machinery (SPEC 070/071). Also
an upstream sync to beta.15 and Go 1.26.6.
PlatformInterface
gained a cancelNotification method, so the Android side now implements it:
cancelling addresses the same notification id that sendNotification posts.
Everything else the core added is new surface (Taildrop bindings from upstream,
an interface gateway field); a javap sweep over the 228 pre-existing classes
shows zero removals, so nothing existing changed shape.
against a 136–178 MB Go heap — three quarters of the memory lived outside the
heap, and the dump had nothing to say about where. The answer was sitting on
the device the whole time, in files that only a per-snapshot manual share could
reach. Asking a non-technical reporter for one more round-trip per snapshot
does not work in practice.
metadata.json,
connections.json and configuration.json verbatim, the tail of go.log
capped at 64 KB (the OOM moment is at the end), and the pprof profiles as
gzip + base64. Older snapshots keep the summary they always had.
jq -r '.oom_reports[0].files["heap.pb"].data' dump.json | base64 -d | gunzip > heap.pb
go tool pprof heap.pb
does not recognise are carried through binary-safe rather than dropped, so a
future core bump cannot silently lose evidence.
🧪 Tests
flutter analyze, 3050 tests and all six checkers (four l10n + docs parity)
pass. The export/import flow was exercised on an emulator end to end: export
with DNS bundled, the file inspected on disk, then re-imported — including the
"already on this device" path. The core bump was verified on the same
emulator: the tunnel comes up, traffic flows through it, and the stop is
clean.
🇷🇺 Русский
✨ Экспорт и импорт правил роутинга
всё сразу и восстанавливал целыми категориями — годится для переезда на новый
телефон, но не для «на, забери моё правило для Gemini».
«Правила»:
Пункт
Что делает
Экспортировать правила…
полноэкранный выбор → сохранение или отправка одного JSON-файла
Импортировать правила…
выбор файла → превью с галочками → добавление выбранного
все. Сохранение переиспользует знакомый по бэкапу шит: «Сохранить в файл»
(системный диалог), «В Загрузки» или «Поделиться».
Второй шаг: DNS
DNS-сервер, о котором получатель никогда не слышал. Поэтому после выбора
правил открывается второй экран — «Добавить DNS» — с двумя секциями: ваши
DNS-серверы и ваши DNS-правила. Серверы, на которые ссылаются выбранные
правила и которых нет в шаблоне приложения, отмечены сразу: именно их у
получателя и не окажется. Остальное по умолчанию снято.
заводит и убирает их само при включении пресета — они приедут вместе с
пресетом, а не с файлом.
Что происходит при импорте
называет каждую правку до подтверждения:
В файле
При импорте
Канал, которого здесь нет
заменяется на vpn-1, правило приезжает выключенным, показано предупреждение
DNS-сервер, которого здесь нет
DNS-опция выключается (Force IPv4 переживает), показано предупреждение
Резолвер, которого здесь нет
сбрасывается в авто
Правило с .srs
приезжает выключенным — нажмите ☁, чтобы скачать, затем включите
Пресет, неизвестный этой версии
отклоняется с причиной, остальное импортируется
Запись неизвестного вида
пропускается, остальное импортируется
DNS-сервер или правило, которые уже есть
серые, «Уже есть на этом устройстве» — ваши настройки не перезаписываются
файла создаёт копии (« (2)» в имени), а не конфликтует. Правило и нужный ему
DNS-сервер, приехавшие одним файлом, связываются вообще без лечения.
восстановлению бэкапа), отклоняется с сообщением, куда его нести на самом
деле.
🔧 Под капотом
sing-box-lx v1.14.0-lx.27-rc.2. Главное в нём: мёртвый
detour-узел больше не замораживает сетевую машинерию (SPEC 070/071). Плюс
синхронизация с апстримом beta.15 и Go 1.26.6.
PlatformInterface появился метод cancelNotification, и Android-сторона его
теперь реализует — отмена адресуется тому же id уведомления, который ставит
sendNotification. Остальное, что принесло ядро, — новая поверхность
(Taildrop-биндинги из апстрима, поле шлюза у сетевого интерфейса); обход
javap по 228 прежним классам показывает ноль удалений, так что ничего
существующего не поменяло форму.
RSS против 136–178 МБ Go-кучи — три четверти памяти жили вне кучи, и сказать,
где именно, дампу было нечем. Ответ всё это время лежал на устройстве, в
файлах, до которых можно было добраться только выгрузкой каждого снимка
вручную. Просить нетехнического человека сделать ещё один заход на каждый
снимок на практике не работает.
metadata.json,
connections.json и configuration.json целиком, хвост go.log до
64 КБ (момент OOM — в конце) и pprof-профили как gzip + base64. У более
старых снимков остаётся прежняя сводка.
jq -r '.oom_reports[0].files["heap.pb"].data' dump.json | base64 -d | gunzip > heap.pb
go tool pprof heap.pb
не знает, переносятся бинарно, а не отбрасываются: бамп ядра не должен молча
терять улики.
🧪 Тесты
flutter analyze, 3050 тестов и все шесть чекеров (четыре l10n + parity
документации) проходят. Экспорт-импорт прогнан на эмуляторе от начала до
конца: экспорт с вложенным DNS, осмотр файла на диске, обратный импорт —
включая ветку «уже есть на этом устройстве». Бамп ядра проверен там же:
туннель поднимается, трафик через него идёт, стоп чистый.
Install / Установка
adb install -r LxBox-v2.20.11-arm64-v8a.apkБез uninstall! Поверх существующей установки. Настройки и подписки сохранятся.
No uninstall needed — install over the existing one. Settings and
subscriptions are preserved.
Previous release / Предыдущий релиз: v2.20.10.