github Jetsku/KytyPS5 u59-windows-20261007-int16.1
KytyPS5 U59 int16.1 — Astro Bot with full lighting, GI and ray tracing, performance-mode occlusion

int16.1 is the int16 pre-release plus low-risk fixes and a much faster default for heavy levels. If anything works
worse than in the int16 pre-release or int15, please report it (with your GPU and CPU model).

What's new in int16.1

  • Galaxy map fixed: the red trails, pillars and blocky red areas around the volcano (the hidden world) and the
    red band at the bottom of the screen are gone. The game fast-clears one of its 64-bit render targets every frame and
    Kyty decoded that clear with a 32-bit decoder, so the clear was dropped and old frames piled up. The same fix covers
    R16F, RG16F, R16, RG16, R8, RG8 and B10G11R11 register clears (KYTY_CLEAR_REGISTER_WIDE=0 restores the old
    behaviour). This bug was also in upstream Kyty.

  • Performance mode by default: occlusion queries off. The game asks the GPU, thousands of times per frame,
    whether objects are hidden behind others. Answering those queries accurately costs about half the frame rate in
    the heaviest levels. int16.1 now answers "visible" to all of them by default (KYTY_GPU_OCCLUSION=0, as other
    Kyty forks do), which roughly doubles the frame rate in the snow level, the clock tower and Ape Escape.
    On the test PC (RTX 3090, Ryzen 9 7950X3D; a test build without the release build's profile optimization, which
    adds about 15%): snow 41 fps, clock tower 31, Ape Escape 31, Sky Garden 30, volcano 59 (accurate mode: snow 20).
    Possible side effects: the game may draw objects or effects that it would normally hide behind walls (rarely
    visible, and it can cost GPU time where a lot is hidden).

  • Accurate occlusion toggle: Global settings > Graphics & display > "Accurate occlusion queries (slower; fixes
    rare visibility issues)" turns the accurate mode back on (it passes --gpu-occlusion on, which overrides the
    preset). Use it if you see objects through walls or other visibility problems, and please report where. The
    accurate mode includes the volcano lava fix below.

  • Volcano lava fixed (accurate occlusion mode): with the camera tilted down in the volcano level, the lava lake
    disappeared (flat orange fog). The emulator paired the game's occlusion queries by a wrong address rule; it now
    pairs them by address, which also keeps the occlusion gate on in Sky Garden.

  • Hang watchdog no longer kills the game: on RTX 50 cards (where the watchdog is on by default) a 5 s stall could
    end the emulator with "Unhandled host exception ... RtlVirtualUnwind". The watchdog's stack dump is now guarded.

  • Out of video memory no longer ends the emulator: an image that does not fit goes to system memory (slower; the
    console prints "Vulkan: video memory full ..."), and a buffer that does not fit is retried.

  • File id fix: Astro Bot file ids are assigned one per file; six pairs of game files shared an id and one of each
    pair could be read in place of the other (one of them a galaxy-map icon).

  • Audio: sounds the game sends to the DualSense speaker now play at 30% on the PC speakers (they were up to 19 dB
    louder than music and effects). Four new volume sliders (master, game sound, music, controller speaker on PC) are in
    the launcher's global Audio settings. The console also prints audio port diagnostics (AudioDiag lines).

  • "AMD CPU patch" renamed to "Intel CPU compatibility (AMD instruction patch)" in the launcher's Compatibility
    settings. It is the same setting (saved configurations and --amd-cpu keep working): on Intel CPUs it emulates the
    PS5's AMD-only instructions (EXTRQ/INSERTQ) and AMD's VRSQRTPS results. It is not needed on AMD CPUs.

  • Smaller fixes ported from chenxiao07's fork: a clean process exit after a fatal error (no more unkillable
    emulator processes), a faster guest memory search while streaming, and faster release shader translation.

  • Level title text fixed (fixed after the int16 pre-release): the level name is drawn as in int14 again.

New defaults and how to turn each off

Switch Default Off / old behaviour What it does
KYTY_GPU_OCCLUSION (preset) 0 (performance mode) 1, or the launcher's "Accurate occlusion queries" (--gpu-occlusion on) Occlusion queries answered "visible" instead of counted on the GPU
KYTY_IMAGE_SYSMEM_FALLBACK on 0 Images that do not fit in video memory go to system memory
KYTY_APR_HASHED_IDS off 1 restores the old hashed ids One file id per file path
KYTY_FATAL_EXIT_PROCESS off 1 restores the old exit path Fatal errors end the process with TerminateProcess
KYTY_IR_VALIDATE off in release 1 runs it Shader IR validation
KYTY_AUDIO_DIAG on 0 Audio port open/close lines in the console (256 lines max)
Audio volumes master/main/music 100%, pad speaker on PC 30% launcher sliders, or KYTY_AUDIO_MASTER_VOLUME, KYTY_AUDIO_MAIN_VOLUME, KYTY_AUDIO_MUSIC_VOLUME, KYTY_AUDIO_PAD_SPEAKER_ON_MAIN_VOLUME (percent, 0-200)

Optional (off by default): KYTY_WIDE_FILL_CLEAR=1, KYTY_GUEST_STORAGE_REPEAT=1, KYTY_READBACK_MERGE_GAP_KB=64,
and the test tool KYTY_VRAM_LIMIT_MB=<MiB> (imitates a smaller GPU).

From int16

  • Astro Bot without the "non RT patch": the game's own tiled lighting, GI probes and ray traced shadows now run,
    so the two patches are no longer needed. Without them the robots used to be black and the lighting missing, because
    the lighting shaders contain ray-tracing instructions and were skipped. Those instructions now run in software on
    any GPU (NVIDIA, AMD and Intel).
  • How to play without the patches: open the launcher, select Astro Bot, open the cheats window and untick
    "Select the existing non-tiled deferred-lighting renderer" and "Disable GI probes and lighting shaders". If you
    see problems, tick them again; this build also runs fine with them.
  • Speed: on the test PC (RTX 3090, Ryzen 9 7950X3D) the full graphics cost about 3% in Sky Garden (about 33.6 fps
    against 34.8 fps with the patches) and practically nothing at the snow level start (21.1 against 21.2 fps).
  • First launch: the first start after an update builds the large lighting shaders, which can freeze the picture
    for up to about 20 seconds once.

Also in int15

  • No more "unsupported sampled depth image" stops on fast GPUs, no crash when leaving extra levels in Sky Garden,
    about 20 upstream shader fixes, a Demon's Souls fix for an unknown image format, and thread priority changes.
  • From int14: shader precompile after updates, faster first pipelines, a better automatic GPU choice, fewer loading
    crashes, Demon's Souls character creation, and the adaptive trigger fixes.

Checked

  • All automated tests pass.
  • Astro Bot 1.018 on one PC (RTX 3090, Ryzen 9 7950X3D), patches off: Sky Garden, snow, clock tower, Ape Escape and
    the volcano with the default (performance) occlusion mode, and snow plus the volcano lava with the camera tilted
    down in accurate mode, with no console errors.
  • Not tested by us on AMD or Intel GPUs or on version 1.007; player reports from RTX 50
    and AMD cards are listed under known issues.

Installing

  1. Download KytyPS5-U59-Windows-x64.zip and extract it to a new folder.
  2. Open launcher.exe. Your existing game list and settings are picked up automatically.
  3. Game patches go in a _Patches folder next to the launcher; saves are kept per folder in _SaveData.

Known issues

  • Grass flicker: small grass/moss clumps on sand (e.g. the crash-site hub) can flicker between two looks from
    frame to frame. Also in earlier builds; being looked at.
  • RTX 50 series: the first launch after installing or updating could crash once while the ray tracing shaders
    were being built. The hang watchdog fix should cure the crash we know of; if it still happens, start the game again
    and please send the console text.
  • AMD graphics cards: with the two patches turned off, the GPU can stop responding ("device lost"), and the water
    in Go-Go Archipelago can make the frame rate drop sharply. On AMD, keep the patches on, or use int15.
  • Second (red) galaxy: one player (RTX 5080, Intel CPU) crashed while arriving at Go-Go Archipelago for the first
    time (the loader read through a bad pointer). We could not reproduce it on our PC. A save from just before the red
    galaxy would help.
  • One crash during startup was seen once in testing and could not be reproduced. If the console shows a crash, please
    send it; it now names the code path.
  • The software ray tracing changes behaviour for other games too (for example Demon's Souls); please report any new
    problem there.
  • Microsoft Defender may flag launcher.exe (Trojan:Win32/Bearfoos.A!ml, a machine-learning verdict on the
    unsigned launcher). It is built from this repository's source by the GitHub workflow.

Testers wanted

Please report (GPU, CPU, driver, what you did, the console text) especially from:

  • RTX 50 series cards (first launch after the update, ray tracing shaders, hang watchdog);
  • AMD Radeon cards (device lost with the patches off, water in Go-Go Archipelago);
  • Intel CPUs (with "Intel CPU compatibility" on and off; the red galaxy's first arrival);
  • 8-12 GB graphics cards (video memory full messages, stutter, frame rate with the defaults).

Switches for testing: KYTY_RT_SOFTWARE=0 KYTY_RT_STUB=1 keeps the lighting but lets every ray miss (no ray-traced
shadows); KYTY_RT_SOFTWARE=0 alone skips those shaders again (only with the patches on). The bundled preset's
KYTY_SRT_VARIANT_READS=1 is required. See U59-README.md in the download for the full list of changes and switches.

Don't miss a new KytyPS5 release

NewReleases is sending notifications on new releases.