A big one: thermostat controls, a camera grid, your own camera as a stream for recorders, a remote API, settings you can save and restore, and the nearest Echo answering when several hear you.
- Thermostats in Drawn mode (#170). A tap on a thermostat opens its controls: the temperature with − and +, a pair of rows for heat/cool, and the modes. On a Spot, a tap on the left or right of the tile steps it down or up. The temperature bar shows whenever there's a target, so the sideways slide is easy to find. Thanks, @remylpat.
- The nearest Echo answers. With several devices in earshot, they compare how well each heard the wake word and only the best one answers. Off by default (a switch on each device). If the others don't answer in time, it answers anyway.
- Camera grid. "All cameras" in the camera drawer shows up to six at once as snapshots; tap one to watch it live. Also the
home_show_camerasaction. - Cameras from go2rtc. Point a device at your go2rtc server (setup page or
home_go2rtc) and its streams join the camera list. - This device's camera as a stream for Frigate or any NVR: RTSP at
rtsp://<device>:8554/camerawith a login, and ONVIF. Off by default; turn it on and set a password on the setup page. A green dot shows on the screen while anything is watching, even with the screen turned off (it stays at its dimmest), and the mute button or lens cover ends it. Use a password of 12 characters or more. - Save and restore settings on the setup page (General). Keys, passwords and logins never go into the file, and a restore never turns on anything that listens, watches or opens a door.
- A remote API and live logs for your own scripts: signed requests only, off by default, and it can't change privacy or security settings. See setup.md, "The remote API".
- Calendars: an event that's on two calendars with the same name and times shows once.
- Immich: two portrait photos side by side, the date and place under each photo, and filters (favorites, a date range, a person). Each is a Photos option, off by default.
- Web pages as a dashboard or screensaver, drawn by dashcast from a list the dashcast server allows (
DASHCAST_PAGES). Each page runs in its own browser with no Home Assistant login. - The assistant and the web: once a turn has read a web page, a search or a calendar, it only looks things up for the rest of that turn, so a page can't tell it to delete your alarms.
- Timers from Home Assistant: pause, resume, add time and take time off (
timer_pause,timer_resume,timer_add,timer_remove). - What an alarm says as it rings: its words (as before), the time and its words, or nothing (
Alarm words). - A room noise sensor (off by default) and two experimental gestures: a double clap and a press and hold on the clock, each firing a Home Assistant event.
- The house word is case-sensitive, and the setup page now says so, and names the devices in the house that use a different one, so a device left out of announcements and the intercom is easy to spot.
- The IP address sensor lists the IPv4 addresses first, so a VPN's address isn't cut off.
Changes you'll notice without turning anything on: an event on two calendars shows once; the assistant refuses to change anything for the rest of a turn after it has read the web, a calendar or a radio search, and reads pages only from the internet; the Timers sensor also lists paused timers ("Bread paused (4:05 left)").
Not yet tried on hardware: everything new above. Please report what you find.
Verify this release was built by CI from its own tag:
gh attestation verify echod-arm --repo HuskerMinion/techo5 --source-ref refs/tags/v1.2.21