Main changes

• Current API: 87.6

• SubGHz: Cardin S449 protocol full support (64bit keeloq) (with Add manually, and all button codes) (use FSK12K modulation to read the remote) (closes issues #735 #908) (by @xMasterX and @zero-mega (thanks!))
• SubGHz: Beninca ARC AES128 protocol full support (128bit dynamic) (with Add manually, and 3 button codes) (resolves issue #596) (by @xMasterX and @zero-mega)
• SubGHz: Treadmill37 protocol support (37bit static) (by @xMasterX)
• SubGHz: Jarolift protocol full support (72bit dynamic) (with Add manually, and all button codes) (by @xMasterX & d82k & Steffen (bastelbudenbuben de))
• SubGHz: New modulation FSK with 12KHz deviation
• SubGHz: KingGates Stylo 4k - Add manually and button switch support + refactoring of encoder
• SubGHz: Stilmatic (R-Tech) - 12bit discr. fix & button 9 support (two buttons hold simulation) (mapped on arrow keys)
• SubGHz: Counter editor refactoring (PR #939 | by @Dmitry422)
• SubGHz: Alutech AT-4N & Nice Flor S turbo speedup (PR #942 | by @Dmitry422)
• SubGHz: Sommer fm2 in Add manually now uses FM12K modulation (Sommer without fm2 tag uses FM476) (try this if regular option doesn't work for you)
• SubGHz: Sommer - last button code 0x6 support (mapped on arrow keys)
• SubGHz: V2 Phoenix (Phox) added 2 counter modes support (docs updated)
• SubGHz: Add 390MHz, 430.5MHz to default hopper list (6 elements like in OFW) (works well with Hopper RSSI level set for your enviroment)
• SubGHz: Fixed button mapping for FAAC RC/XT
• SubGHz: KeeLoq display decrypted hop in Hop instead of showing encrypted as is (encrypted non byte reversed hop is still displayed in Key field)
• SubGHz: BFT KeeLoq try decoding with zero seed too
• SubGHz: KeeLoq display BFT programming mode TX (when arrow button is held)
• SubGHz: KeeLoq add counter mode 7 (sends 7 signals increasing counter with 0x3333 steps) - may bypass counter on some receivers!
• SubGHz: Add signals button editor and real remote simulation (full signal transmit with just one click) (PR #956 #958 | by @Dmitry422)
• SubGHz: TX Power setting (PR #960 | by @LeeroysHub)
• Desktop: BT ON/OFF instead of Lock/Unlock action in desktop lock menu (To lock - hold Up button) (PR #965 | by @Dmitry422) (idea by Dezederix)
• Desktop: Holding back button to power off menu now allows to open power settings on left button (idea by Dezederix)
• JS: feat: add IR capabilities to the JS engine (PR #957 | by @LuisMayo)
• NFC: Handle PPS request in ISO14443-4 layer (by @WillyJL)
• NFC: Fixes to READ_MULTI and GET_BLOCK_SECURITY commands in ISO 15693-3 emulation (by @WillyJL & @aaronjamt)
• Archive: Allow folders to be pinned (by @WillyJL)
• Apps: Build tag (12feb2026p3) - Check out more Apps updates and fixes by following this link

Other changes

• Settings: Storage settings exit scenes properly if used via favourites (fixes issue #951)
• LCD: Backlight settings bug fix (PR #962 | by @Dmitry422)
• UI: Various small changes
• Desktop: Disable winter holidays anims
• OFW PR 4333: NFC: Fix sending 32+ byte ISO 15693-3 commands (by @WillyJL)
• NFC: Fix LED not blinking at SLIX unlock (closes issue #945)
• SubGHz: Added some RAM
• SubGHz: Fix documentation link for HT12A protocol (by @carlogrisetti)
• SubGHz: Improve docs on low level code (PR #949 | by @Dmitry422)
• SubGHz: Fix Alutech AT4N false positives
• SubGHz: Cleanup of extra local variables
• SubGHz: Replaced Cars ignore option with Revers RB2 protocol ignore option
• SubGHz: Moved Starline, ScherKhan, Kia decoders into external app
• SubGHz: Possible Sommer timings fix
• SubGHz: Various fixes
• SubGHz: Nice Flor S remove extra uint64 variable
• SubGHz: Rename Sommer(fsk476) to Sommer (Sommer keeloq works better with FM12K) + added backwards compatibility with older saved files
• Docs: Add full list of supported SubGHz protocols and their frequencies/modulations that can be used for reading remotes - Docs Link
• Desktop: Show debug status (D) if clock is enabled and debug flag is on (PR #942 | by @Dmitry422)
• NFC: Fix some typos in Type4Tag protocol (by @WillyJL)
• Clangd: Add clangd parameters in IDE agnostic config file (by @WillyJL)
  
  
  

Known NFC post-refactor regressions list:

• Mifare Mini clones reading is broken (original mini working fine) (OFW)
• While reading some EMV capable cards via NFC->Read flipper may crash due to Desfire poller issue, read those cards via Extra actions->Read specific card type->EMV

-> How to install firmware

-> Unleashed FW Web Installer

Please support development of the project

Service	Remark	QR Code	Link/Wallet
Patreon			patreon.com/mmxdev
Boosty	patreon alternative		boosty.to/mmxdev
CloudTips	only RU payments accepted		pay.cloudtips.ru/p/7b3e9d65
YooMoney	only RU payments accepted		yoomoney.ru/fundraise/XA49mgQLPA0.221209
USDT	TRC20		TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
ETH	BSC/ERC20-Tokens		0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a
BTC			bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
SOL	Solana/Tokens		DSgwouAEgu8iP5yr7EHHDqMNYWZxAqXWsTEeqCAXGLj8
DOGE			D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
LTC			ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
BCH			qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
XMR	Monero		41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
TON			UQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmsxa

Thanks to our sponsors who supported project in the past and special thanks to sponsors who supports us on regular basis:

@mishamyte, ClaraCrazy, Pathfinder [Count Zero cDc], callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Recommended update option - Web Updater

What e, , c means? What I need to download if I don't want to use Web updater?

What build I should download and what this name means - flipper-z-f7-update-unlshd-085(e / c).tgz ?

flipper-z = for Flipper Zero device

f7 = Hardware version - same for all flipper zero devices

update = Update package, contains updater, all assets (plugins, IR libs, etc.), and firmware itself

unlshd-085 = Firmware version

To enable RGB Backlight support go into LCD & Notifications settings

⚠️RGB backlight hardware mod, works only on modded flippers! do not enable on non modded device!

Firmware Self-update package (update from microSD) - flipper-z-f7-update-unlshd-085.tgz for mobile app / qFlipper / web

Archive of scripts folder (contains scripts for FW/plugins development) - flipper-z-any-scripts-unlshd-085.tgz

SDK files for plugins development and uFBT - flipper-z-f7-sdk-unlshd-085.zip

Install FW via Web Updater:

Default >

Extra apps > e

No apps > c