github DAB-LABS/HAIR v1.2.0
v1.2.0 -- Blow Dry

latest release: v1.3.0
4 days ago

Radio remotes arrive in beta, and air conditioners get easier to drive.

Radio remotes (beta)

On Home Assistant 2026.11 and later, HAIR hears and sends radio codes as well as infrared: keyfobs, ceiling fan remotes, plug handsets and doorbells. Any receiver or transmitter on Home Assistant's new radio_frequency platform works.

  • Hearing: on 2026.11 that means a Broadlink RM pro or RM4 pro with BroadSniff 0.3.0. ESPHome radio receivers follow with Home Assistant 2026.12 (ESPHome 2026.5 or later has the receiver side). Radio codes show in the Sniffer with their band, and alias, assign and trigger like infrared ones. An always-on radio receiver files new codes only inside a capture window opened from its pill.
  • Sending: a Broadlink RM pro or RM4 pro, or an ESPHome radio transmitter. A device's radio codes go to its radio transmitters, each code's band is checked against what the transmitter can send, and a new radio command repeats as many times as one press of the remote did. The Mirror shows each radio send with its band.
  • Codes in and out: the Clipper and the code editor take a Flipper .sub, a list of timings or a Broadlink radio code. Wigs carry radio codes as hair-wig/5; a wig with no radio codes is written exactly as before.

This is the first release with radio, so it is marked beta. Fixed-code remotes work best; rolling-code remotes such as car keys and Somfy blinds send a new code every press and cannot be recognized, and a few remote types are not filed yet. docs/rf.md covers the receivers and what to expect, and reports from other hardware are welcome.

The receiver row

The top of the Sniffer now shows every receiver as a pill. A solid IR or RF badge means the receiver is taking new codes now, and a pill glows when HAIR takes a code from it. A capture device's window opens from its pill. Three glyphs at the right filter infrared, radio and hidden remotes, and the homepage's Devices and Remotes headers carry IR and RF glyphs that filter their cards. Capture moved from the Devices tab's hardware cards to the Sniffer, and those cards now list one row per capability with when each last sent or heard.

Air conditioners with one Power button

Some units have a single Power button that turns them on when off and off when on. Tick "This device has one Power button." in Device Settings, and HAIR sends that code only when the power needs to flip: turning off a unit that is already off no longer turns it on, and turning it on sends Power, then the chosen setting. A setting changed while the unit is off is kept for the next turn on, and a state sent from the State Matrix card while it shows off goes out the same way. A remote pinned to such a device now follows the power press it heard instead of sending it again. Thanks to @orthobots for the file and the report (#183).

Climate wigs show only what each mode has

An air conditioner made from a climate wig now offers, in each mode, only the fan speeds, swing settings and temperatures that mode really has. A dry mode stored with one code at every temperature shows no temperature, and the temperature range comes from the codes the wig still holds. After a mode change the card shows the fan and swing that actually went out. Requested by @marcos-mvs (#168).

Quick double presses

A quick double press of a remote button now counts as two presses in the Sniffer, in triggers and through pinned Devices, for remotes whose frames mark a new press (NEC, JVC, RC5 and RC6 among them). A held button still steps about three times a second. A trigger with min hits of 2 now fires on one quick double press. Reported by @pbo10 (#237).

More protocols

  • HAIR recognizes Proton remotes (NEC Display projectors and televisions, Proton and Audiovox equipment). They no longer read as GE-AC air conditioners on Home Assistant releases whose library decodes GE-AC, and buttons and triggers saved under GE-AC from such a remote are read again on the first load.
  • The Closet builds irdb CSV rows in eight more protocols: Mitsubishi, RECS80, G.I. Cable, Dish Network, TiVo, Panasonic Old, Fujitsu and Proton. About 93% of irdb's rows now import, up from about 84%.

Fixes

  • On an air conditioner's State Matrix card, the temperature tile Send will use is shown as selected when the card opens. Reported, with the fix, by @mode0192 (#116).
  • A radio trigger can no longer be limited to an infrared receiver, where it never fired. A trigger already saved that way is fixed by opening it and pressing Save.
  • Editing a code in the Sniffer, the Clipper or the Mirror no longer marks it as heard just now.

Full changelog: CHANGELOG.md

Don't miss a new HAIR release

NewReleases is sending notifications on new releases.