github CasualArclamp/DecSAT v1.2.0
DecSAT 1.2.0 (Windows portable)

latest releases: v1.14.0, v1.13.1, v1.13.0...
16 days ago

What's new in 1.2.0

Scan a whole satellite band from the wideband overview.

The wideband overview sweeping the Ku low band

  • The sweep now works in RF. Start and Stop are satellite frequencies: the radio's tuning plus the LNB's LO and LO trim. Enter 10700–11700 MHz and the sweep tunes the radio across 950–1950 MHz itself. Before, the strip worked in the radio's own tuning frequencies but put the VFO box at RF, so with an LNB set the two did not line up.
  • Ku band presets. "Ku low band" (10.70–11.70 GHz) and "Ku high band" (11.70–12.75 GHz) sit beside Full device, ±250 MHz and Custom.
  • Fobos and Airspy sweep too. The sweep always opened a HackRF before. It now opens the radio chosen in the radio panel: HackRF One, Fobos SDR or Airspy Mini/R2, as well as the RTL-SDR, PlutoSDR and UHD B210.
  • A readable strip. A filled trace in dB above the band's noise floor, dB and MHz scales, a box marking the VFO with its frequency and width, and a cursor that reads the frequency and level under the mouse. Click or drag on it to retune there. It draws one peak per pixel column, so a dense sweep stays cheap to redraw.

Turn it on with View ▸ Wideband spectrum overview, choose a preset and press ⟳ Sweep. Reception pauses while the sweep has the radio. (The picture is a simulated Ku low band sweep.)

Portable Windows executables for 64-bit Windows 10/11, nothing to install (static C runtime).

File What
decsat-gui.exe Desktop app: wideband waterfall with VFOs (DVB-S2/S2X → GSE/IP or MPEG-TS, DVB-S, satellite modems, DVB-CID, generic PSK/QAM, IQ record), IQ files or a HackRF One; a DVB-S2/S2X transmitter (MPEG-TS to the HackRF or a file)
decsat-tx.exe Transmitter: a webcam and microphone (or a video file) encoded live in H.264, H.265, H.266, AV1 or MPEG-2 by ffmpeg, on a DVB-S2/S2X carrier with QO-100 presets, to the HackRF or an IQ file (needs ffmpeg)
decsat.exe Command line: decsat scan, decsat decode, decsat analyse, decsat scene, decsat cid, decsat test-signals, decsat tx, decsat record, decsat modcods
decsat-scene_8Msps.cs8 Test signal, 8 MS/s, 4 s: DVB-S2 (IP over GSE, and an S2X ACM carrier with MPEG-TS), DVB-S, a TPC 2964 modem carrier and a CW tone
decsat-cid_3360000sps.cs8 Test signal, 3.36 MS/s, 30 s: DVB-S2 QPSK 1/2 at +700 kHz with a DVB-CID under it (identifier and position decode)

Open a test signal in the GUI (Open IQ…; the sample rate is in the file name) and click a carrier, or run decsat test-signals to make them yourself (tests/README.md).

A HackRF One needs no DLLs (it transmits only when armed: see the README); on Windows it must use the WinUSB driver (Zadig, or the one the official HackRF tools install). IQ files need nothing.
Windows SmartScreen may warn on first start because the files are unsigned ("More info" → "Run anyway").

Built from d13196c by GitHub Actions.

SHA-256:

d15153425d84c02d6fd86c0db4e713c6333ab63709b63108754081b086ee718d  decsat-gui.exe
d196af395d03c2981be550a5346097994ac0b096b21ffd19963662586eb5279b  decsat.exe
04af860059482f61ae6ed3c695982bafb10729667219d4c258214d68868398b8  decsat-tx.exe
81491d2ab66896a378df1cd642bc49793ffbf45bfcadfe6e09fd3f18fed30184  decsat-scene_8Msps.cs8
d1d2850158b9fd2f78e91c49043413c83942652a2faa551ccac161a4241f0dfb  decsat-cid_3360000sps.cs8

Don't miss a new DecSAT release

NewReleases is sending notifications on new releases.