What's new in 1.13.0
Inmarsat Classic Aero on a VFO
- New decoder "Inmarsat Aero" (
aeroon the command line): put a VFO on a carrier of the L-band aeronautical service and it names the channel itself and decodes it. It is DecAero's receiver, built in. - P channel (ground to aircraft; 600, 1200 and 10500 bit/s): signalling in words, ACARS messages, other data in hex.
- C channel (a telephone call; 8400 and 21000 bit/s): the speech played through the app's audio output, the call's progress in words.
- R and T channel bursts (aircraft to ground) are in the decoder but have not been tried here on a recording.
- The card is the DVB card's: channel and bit rate, the link margin, the Es/N0 bar marked where the code gives up, then the stages and the log. Record writes the log to a text file.
- Make the VFO 4 kHz wide or more (about 12 kHz for 10500 and 8400 bit/s, 25 kHz for 21000 bit/s). Voice assignments are logged, not followed: DecAero remains the app for watching a whole band.
A smoother waterfall
- 60 rows a second, where it was 25, at the same CPU (measured on a 5 MS/s recording).
- Even scrolling: the waterfall moves the same distance every frame, on files and on a radio that hands over its samples in bursts. It scrolled in steps of 0 to 3 pixels before.
- The waterfall's height is now 8.5 s of signal (it was 20 s), and it shows the signal about a fifth of a second late on a radio; the trace above it is not delayed.
- A remote server's waterfall stays at 25 rows a second.
Portable Windows executables for 64-bit Windows 10/11, nothing to install (static C runtime).
| File | What |
|---|---|
decsat-gui.exe
| Desktop app: wideband waterfall with VFOs (DVB-S2/S2X → GSE/IP or MPEG-TS, DVB-S, satellite modems, DVB-CID, generic PSK/QAM, IQ record), IQ files or a HackRF One; a DVB-S2/S2X transmitter (MPEG-TS to the HackRF or a file) |
qo100-beacon.exe
| QO-100's 400 bit/s PSK beacon from a sound card: waterfall, frames, text and housekeeping values |
decsat-tx.exe
| Transmitter: a webcam and microphone (or a video file) encoded live in H.264, H.265, H.266, AV1 or MPEG-2 by ffmpeg, on a DVB-S2/S2X carrier with QO-100 presets, to the HackRF or an IQ file (needs ffmpeg) |
decsat.exe
| Command line: decsat scan, decsat decode, decsat analyse, decsat scene, decsat cid, decsat test-signals, decsat tx, decsat record, decsat modcods
|
decsat-server.exe
| Headless SDR server: serves a radio at the dish to decsat-gui or decsat over one TCP connection (see docs/REMOTE.md)
|
decsat-server-app.exe
| The same server in a window: double-click, choose who can connect, press Start |
decsat-scene_8Msps.cs8
| Test signal, 8 MS/s, 4 s: DVB-S2 (IP over GSE, and an S2X ACM carrier with MPEG-TS), DVB-S, a TPC 2964 modem carrier and a CW tone |
decsat-cid_3360000sps.cs8
| Test signal, 3.36 MS/s, 30 s: DVB-S2 QPSK 1/2 at +700 kHz with a DVB-CID under it (identifier and position decode) |
Open a test signal in the GUI (Open IQ…; the sample rate is in the file name) and click a carrier, or run decsat test-signals to make them yourself (tests/README.md).
A HackRF One needs no DLLs (it transmits only when armed: see the README); on Windows it must use the WinUSB driver (Zadig, or the one the official HackRF tools install). IQ files need nothing.
Windows SmartScreen may warn on first start because the files are unsigned ("More info" → "Run anyway").
Built from 2209feb by GitHub Actions.
SHA-256:
43e94b7826d2dc4d9db55bd773e1cfbc30066ecc77f7318f9a4373346ece0221 decsat-gui.exe
4e9b819bc7901c44e831be0e0103a041a6ff8b6b67256a64f6156b6966b0fb88 decsat.exe
66756695bebde9ad641e9dc7ca54e8a9c4d14d2ceeb46168f2487c19dd9ce995 decsat-tx.exe
acce0aa07bde62d8030e709816e21326e46306b9e19c50a7f79753a54d34f184 decsat-server.exe
cb2f7acfa88fd8e6432bce68c1f7bb76214615424e1800fe6c9fa522004cd9cc decsat-server-app.exe
f9faa41983b85c9c803d2d104a4eeee98d2b876fb1ff34689e8e6a73386c865e qo100-beacon.exe
81491d2ab66896a378df1cd642bc49793ffbf45bfcadfe6e09fd3f18fed30184 decsat-scene_8Msps.cs8
d1d2850158b9fd2f78e91c49043413c83942652a2faa551ccac161a4241f0dfb decsat-cid_3360000sps.cs8