github CasualArclamp/DecSAT v1.11.0
DecSAT 1.11.0 (Windows portable)

one hour ago

What's new in 1.11.0

Decimation for every receiver (#69)

  • A Decimation picker in each live receiver's window (HackRF, Fobos, Airspy / HydraSDR, SDRplay, RTL-SDR, UHD, ADALM-PLUTO and network IQ): none, or the radio's sample rate divided by 2, 4, 8, 16, 32 or 64 before anything else. An Airspy R2 at 2.5 MS/s ÷ 16 gives a 156 kS/s span.
  • The whole chain follows the new rate: the span, the waterfall's bins and the VFOs. A narrow carrier costs less CPU and gets a finer waterfall.
  • Half-band filters: a cascade of half-band FIR stages. The middle 80 % of the new span is flat to 0.1 dB, with aliases more than 65 dB down.
  • One setting for all receivers, remembered between runs. Change it while the radio is stopped.
  • On the command line: decsat decode --airspy MHz --decimate 8 works with any live source; decsat-gui --decimate N sets it for unattended runs.

Checked with a 150 kS/s carrier sent as 6 MS/s network IQ and decimated 8×: identified and locked.

Portable Windows executables for 64-bit Windows 10/11, nothing to install (static C runtime).

File What
decsat-gui.exe Desktop app: wideband waterfall with VFOs (DVB-S2/S2X → GSE/IP or MPEG-TS, DVB-S, satellite modems, DVB-CID, generic PSK/QAM, IQ record), IQ files or a HackRF One; a DVB-S2/S2X transmitter (MPEG-TS to the HackRF or a file)
qo100-beacon.exe QO-100's 400 bit/s PSK beacon from a sound card: waterfall, frames, text and housekeeping values
decsat-tx.exe Transmitter: a webcam and microphone (or a video file) encoded live in H.264, H.265, H.266, AV1 or MPEG-2 by ffmpeg, on a DVB-S2/S2X carrier with QO-100 presets, to the HackRF or an IQ file (needs ffmpeg)
decsat.exe Command line: decsat scan, decsat decode, decsat analyse, decsat scene, decsat cid, decsat test-signals, decsat tx, decsat record, decsat modcods
decsat-server.exe Headless SDR server: serves a radio at the dish to decsat-gui or decsat over one TCP connection (see docs/REMOTE.md)
decsat-server-app.exe The same server in a window: double-click, choose who can connect, press Start
decsat-scene_8Msps.cs8 Test signal, 8 MS/s, 4 s: DVB-S2 (IP over GSE, and an S2X ACM carrier with MPEG-TS), DVB-S, a TPC 2964 modem carrier and a CW tone
decsat-cid_3360000sps.cs8 Test signal, 3.36 MS/s, 30 s: DVB-S2 QPSK 1/2 at +700 kHz with a DVB-CID under it (identifier and position decode)

Open a test signal in the GUI (Open IQ…; the sample rate is in the file name) and click a carrier, or run decsat test-signals to make them yourself (tests/README.md).

A HackRF One needs no DLLs (it transmits only when armed: see the README); on Windows it must use the WinUSB driver (Zadig, or the one the official HackRF tools install). IQ files need nothing.
Windows SmartScreen may warn on first start because the files are unsigned ("More info" → "Run anyway").

Built from 657693f by GitHub Actions.

SHA-256:

66c2933975a080a253d0e91bcfd7c901da347c8d2ceb4d6245c8b8edc7dd8ff5  decsat-gui.exe
f2a78c3f7735997c95da645a89b51ac5ad7433b27066be64e4c95b5f8824f023  decsat.exe
e11377a3692dbd7cd3844fe900bac8a0a65e6a58e4d938b2d53e9b3609bec437  decsat-tx.exe
64f38f3a0d804c7dff3e24b49831ad821b229f603caa2627f937af9c4926c628  decsat-server.exe
44882b583f02e933627d747531d1a977da50aa0a169af1e1303fba7407301106  decsat-server-app.exe
6e0699e191da53cadd08f93e0c4d296989c879b9b861d45460d275c7682695c5  qo100-beacon.exe
81491d2ab66896a378df1cd642bc49793ffbf45bfcadfe6e09fd3f18fed30184  decsat-scene_8Msps.cs8
d1d2850158b9fd2f78e91c49043413c83942652a2faa551ccac161a4241f0dfb  decsat-cid_3360000sps.cs8

Don't miss a new DecSAT release

NewReleases is sending notifications on new releases.