github CasualArclamp/DecSAT v1.10.0
DecSAT 1.10.0 (Windows portable)

one hour ago

What's new in 1.10.0

DVB-RCS2

  • Burst time plans read. DecSAT now reads RCS2's frame types, transmission types and burst time plans (EN 301 545-2: FCT2, BCT, TBTP2 and the SCT), from transport-stream sections and from GSE. Each plan's bursts are placed on the air: uplink frequency, time, length and which terminal. Shown under the RCS and GSE cards and by decsat decode. Tested on tables built from the standard; not yet seen on the air.
  • Burst receiver and turbo code (groundwork). The RCS2 duo-binary turbo code and a receiver for linear bursts (π/2-BPSK, QPSK, 8PSK, 16QAM; annex A waveforms 1–7) are in the engine. In tests through noise, waveform 3 (QPSK 1/3) loses none of 40 bursts at Es/N0 1 dB. It is not yet wired to a Return pool VFO, and no RCS2 burst has been read off the air.
  • A DVB-RCS field guide. One page on telling return links apart: DVB-RCS, the RCS2 burst kinds, Newtec Mx-DMA, GSE-signalled inroutes and more, each with an animated waterfall, envelope, burst layout and constellation. View it rendered.
  • Inroutes on a weak carrier. A Return pool VFO now finds frames on a lone inroute only 6 dB over its noise (guard silences 3 dB deep are enough). A big hub's inroute table is placed in 0.03 s, down from 5.7 s, so the pool keeps up beside a hub with dozens of inroutes.

Beacons

  • JCSAT-17's telemetry decoded. The beacons on 12200.5 and 12201.5 MHz, listed elsewhere as MEASAT-3b's, turn out to be JCSAT-17's. The beacon card and the command line show its position, orbit plane, speed, attitude, Sun direction, solar array angle and timers, and from the second subcarrier the attitude computer's pages (Sun, Moon, quaternions). The layout was worked out from recorded frames and checked against geometry; the velocity's unit is inferred.
  • DSN-3 (Kirameki-3) joins the beacon list at 12204.5 MHz, decoded off air (CCSDS AOS, encrypted packets). 12202.5 MHz is listed in the same modulation, not confirmed.
  • Frame lock that holds and comes back. A lock lost in a fade is found again, a coded lock follows a bit slip, and several false locks are gone: uncoded telemetry read as coded, two near hits of a short word, and code symbols framed as data once a code has framed.
  • Optus D3's second stream (4800-bit frames with no standard marker) now frames.
  • CCSDS frames sent without the randomiser are read without it (Optus 10's beacon).

GUI

  • Version in the title bar. The main window reads "DecSAT v1.10.0", so you can see which build you are running.
  • 32768 and 65536 point FFTs for the waterfall (--fft N for an unattended run).
  • Constellation, MODCOD and FEC panels update every block again (every 40 ms; they had dropped to five updates a second).

Portable Windows executables for 64-bit Windows 10/11, nothing to install (static C runtime).

File What
decsat-gui.exe Desktop app: wideband waterfall with VFOs (DVB-S2/S2X → GSE/IP or MPEG-TS, DVB-S, satellite modems, DVB-CID, generic PSK/QAM, IQ record), IQ files or a HackRF One; a DVB-S2/S2X transmitter (MPEG-TS to the HackRF or a file)
qo100-beacon.exe QO-100's 400 bit/s PSK beacon from a sound card: waterfall, frames, text and housekeeping values
decsat-tx.exe Transmitter: a webcam and microphone (or a video file) encoded live in H.264, H.265, H.266, AV1 or MPEG-2 by ffmpeg, on a DVB-S2/S2X carrier with QO-100 presets, to the HackRF or an IQ file (needs ffmpeg)
decsat.exe Command line: decsat scan, decsat decode, decsat analyse, decsat scene, decsat cid, decsat test-signals, decsat tx, decsat record, decsat modcods
decsat-server.exe Headless SDR server: serves a radio at the dish to decsat-gui or decsat over one TCP connection (see docs/REMOTE.md)
decsat-server-app.exe The same server in a window: double-click, choose who can connect, press Start
decsat-scene_8Msps.cs8 Test signal, 8 MS/s, 4 s: DVB-S2 (IP over GSE, and an S2X ACM carrier with MPEG-TS), DVB-S, a TPC 2964 modem carrier and a CW tone
decsat-cid_3360000sps.cs8 Test signal, 3.36 MS/s, 30 s: DVB-S2 QPSK 1/2 at +700 kHz with a DVB-CID under it (identifier and position decode)

Open a test signal in the GUI (Open IQ…; the sample rate is in the file name) and click a carrier, or run decsat test-signals to make them yourself (tests/README.md).

A HackRF One needs no DLLs (it transmits only when armed: see the README); on Windows it must use the WinUSB driver (Zadig, or the one the official HackRF tools install). IQ files need nothing.
Windows SmartScreen may warn on first start because the files are unsigned ("More info" → "Run anyway").

Built from 8f75ba9 by GitHub Actions.

SHA-256:

9fd0360439ef1d8b69e461701685e30bfa20356aae69ab3d535d68b3fe4c6d67  decsat-gui.exe
66a4ab0caf69454f72d9f9692722d6d9080f52f5d9ac002be076f5964c9e034d  decsat.exe
0df3390be93b29912d7c625f4e0e87ef5ff1f8aa97e03c8e6f817e489e446bf3  decsat-tx.exe
5ca4fa2d49287c63e1677c60a2460d7bb753a4b3f452da1b3f4a84412d09e4b2  decsat-server.exe
ccce4a6495b9eaaaa29627dee0db8244eb66b3cfc228dfdbb8927c6b55ea28b7  decsat-server-app.exe
29edc2f2977e602ca08f3eedc6181754aac0eb9eb4eee8a86ed661503dd8f7e1  qo100-beacon.exe
81491d2ab66896a378df1cd642bc49793ffbf45bfcadfe6e09fd3f18fed30184  decsat-scene_8Msps.cs8
d1d2850158b9fd2f78e91c49043413c83942652a2faa551ccac161a4241f0dfb  decsat-cid_3360000sps.cs8

Don't miss a new DecSAT release

NewReleases is sending notifications on new releases.