What's new in 0.10.3
The CDM type found by itself. "Comtech CDM modem" now starts on a new model, Type found, and works out what the carrier is:
- The decoder. Identify's first look picks it: TPC 2964 when it sees the unique word, a Q-Flex FastLink when it names one, else the Viterbi K=7 code. A decoder that hasn't locked in 10 s of signal makes way for the next.
- The model. It comes from what the data carry:
- D&I++ or E1 timeslots: CDM-600L voice.
- Timeslots in HDLC packets: CDM-570L trunk.
- Other TPC data (IP, Frame Relay, TS): CDM-570L TPC.
- The K=7 code: CDM-570L Viterbi, the radar carriers.
The VFO's label reads "auto TRK", "auto 570" and so on (CDM? until it knows), and the settings show what was found beside the model menu. G.728 voice plays by itself when speech turns up, under the voice floor. The fixed models are still in the menu, and the command line takes --decoder auto.
Fixed transponders in dark grey. A radar's or an ADS-B ground station's field monitor is flagged by the RAB bit in I048/020 or I021/040. These test transponders are now drawn dark grey on the scope, after coasted yellow, and left out of the no-ADS-B red set. The colour legend has a "fixed xpdr" line.
Portable Windows executables for 64-bit Windows 10/11, nothing to install (static C runtime).
| File | What |
|---|---|
decsat-gui.exe
| Desktop app: wideband waterfall with VFOs (DVB-S2/S2X → GSE/IP or MPEG-TS, DVB-S, satellite modems, DVB-CID, generic PSK/QAM, IQ record), IQ files or a HackRF One; a DVB-S2/S2X transmitter (MPEG-TS to the HackRF or a file) |
decsat.exe
| Command line: decsat scan, decsat decode, decsat analyse, decsat scene, decsat cid, decsat test-signals, decsat tx, decsat record, decsat modcods
|
decsat-scene_8Msps.cs8
| Test signal, 8 MS/s, 4 s: DVB-S2 (IP over GSE, and an S2X ACM carrier with MPEG-TS), DVB-S, a TPC 2964 modem carrier and a CW tone |
decsat-cid_3360000sps.cs8
| Test signal, 3.36 MS/s, 30 s: DVB-S2 QPSK 1/2 at +700 kHz with a DVB-CID under it (identifier and position decode) |
Open a test signal in the GUI (Open IQ…; the sample rate is in the file name) and click a carrier, or run decsat test-signals to make them yourself (tests/README.md).
A HackRF One needs no DLLs (it transmits only when armed: see the README); on Windows it must use the WinUSB driver (Zadig, or the one the official HackRF tools install). IQ files need nothing.
Windows SmartScreen may warn on first start because the files are unsigned ("More info" → "Run anyway").
Built from 4f4ec50 by GitHub Actions.
SHA-256:
7cd0b786e4d3a7db5f498fc475c23b9b481858c6dfa6ffa88c0782efd8142164 decsat-gui.exe
572b0033bbfc40eb36fef19c24ddc13fad0a4de8dc11378f420c730b2f8d04de decsat.exe
e4ef316d5919dbc12343e642cad54902a70c0f9aef1bef6b44f3970006c7a624 decsat-scene_8Msps.cs8
c17c9b2c73c85b31240384698800863473517f641c5ba3afe2add47f0c6715b3 decsat-cid_3360000sps.cs8