Two more radios, and passive radar from any DVB-T multiplex.
What's new
- ADALM-PLUTO and Pluto+. Pick ADALM-PLUTO / Pluto+ in the source list, or use
--radio pluto. The driver speaks the Pluto's own IIOD protocol in pure Rust: no libiio and no DLLs, still one exe.- Links:
auto(the default) uses USB if ADI's Pluto USB driver is installed, and otherwise the Pluto's USB network at 192.168.2.1. Useip:ADDRESSfor a Pluto+ on Ethernet. - Rate: it runs at 64/7 MS/s, the 8 MHz mode's own clock and the least the link has to carry.
- Gain: in dB, or the AD9361's AGC.
- Tested on a real Pluto (AD9364, ADI firmware v0.39) over both USB and its network.
- Mind the link: on stock firmware a Pluto's USB carries about 7.4 MS/s of 16-bit IQ, less than a DVB-T channel needs. Samples lost that way now show as dropped buffers.
- For full-rate DVB-T, use F5OEO's Tezuka firmware, whose 8-bit IQ is picked up automatically and halves the load, or a Pluto+ on Ethernet. The 8-bit mode has not yet been tried on hardware.
- Receive only: the transmit LO is powered down.
- Links:
- HydraSDR RFOne. It runs on the Airspy driver (pick Airspy R2 / HydraSDR, or
--radio hydrasdr) and is named from its firmware. Tested live at 10 MS/s. - Passive radar. A range–Doppler panel for DVB-T locks uses the received signal as its own reference:
- Range: 131 m bins on 8 MHz channels.
- Doppler: ±541 Hz in 8K 1/32.
- Echo list: each echo's range, Doppler and bistatic speed.
- Cost: about 8 % of a core, and only while the panel is shown.
- Services panel now runs full height and scrolls in a short window (#15).
- A channel rescan clears the old list when it starts. A stopped scan keeps what it found.
Download
DecDVB-T-v0.5.0-windows-x64.zip: decdvbt-gui.exe (the receiver) and decdvbt.exe (command line), for 64-bit Windows 10/11, with nothing to install. The HackRF, Airspy/HydraSDR and Pluto USB links need the WinUSB driver (Zadig, or ADI's driver for the Pluto).
