github ALLFATHER-BV/wadamesh beta_64
wadamesh beta_64

latest releases: beta_106, beta_105, beta_104...
pre-release3 months ago

Test build. Stable stays beta_63.

Flash it at flasher.wadamesh.com with the Beta toggle on, or on-device via Settings → Firmware with "Get test builds (beta)" enabled.


The Heltec V4 freeze — the rest of it

beta_62 took one storage delete off the packet path and that genuinely helped. Then @Yoss101 came back with the detail that mattered: the freezes had got rarer and longer. Rarer was the fix working. Longer was the half nobody had measured.

Here is what was actually costing the time. A contact record is 152 bytes and the table holds up to 2000 of them, so saving contacts rewrote the whole 304 KB file on every change — and the crash-safe write keeps a second copy of the same size beside it while it swaps. Roughly 600 KB of flash churn because one contact changed. On a board with no card that lands on internal flash, whose garbage collection suspends the flash cache and stalls both CPU cores. That is why the entire device went away instead of dropping a packet.

But the table never changes in bulk. Replacing the oldest contact overwrites one slot — the array is unsorted and never shifts — and hearing from a node you already know touches one entry. So each record is now compared against what is already stored and only the differing ones are written back.

A new contact replacing an old one writes 152 bytes instead of 304,000. A save with nothing to change writes nothing at all.

Because that is a new way of writing the file, and because the data at stake is your contact list, it checks its own work: every patched record is read back and compared, and on any disagreement it falls through to the old whole-file write. A filesystem that accepts a positioned write and quietly drops it cannot leave you with a half-written contact list.

Also: contact deletes that overflowed the queue used to leak their stored record permanently — fixed, and the queue is 4× deeper. About → System info gained a Contact store panel (contacts, space used, how full internal flash is, and what the last save cost). If you report a freeze, that panel is the useful photograph.

@Yoss101 and @pisti87 — this is the one to test. Thank you both, and particularly @Yoss101 for coming back to say a fix had only half worked; that report is what found the rest of it.

Apps got a lot more capable

Lua apps gained the real date and time, the buzzer, battery state, GPS position, a scoped and rate-limited private folder each, hardware key presses, and the ability to send mesh messages and receive replies (#245).

Anything reaching outside an app asks you first, per app, once. Sending and receiving are separate permissions, so granting one does not grant the other, and a refusal is remembered rather than nagged. New page: Settings → App permissions — every installed app, exactly what it may do, and a switch to take any of it back.

The extended toolkit is limited to boards with the memory to carry it, so the Heltec V4 keeps its resources for the mesh; apps can see which features exist and adapt. An SDK Test app is in the Store — it exercises every new call and reports pass/fail per line.

Fixes

  • Accented and non-Latin characters showed as empty boxes in the grey hint text inside empty fields — the Wi-Fi password box, the MQTT bridge fields, and ~two dozen others. Fixed everywhere, in every language. (Thanks @pisti87, who also found the last one.)
  • A translated line whose placeholders do not match the English original is now ignored rather than used. Since language files download from the Store, this closes off a whole class of crash — including in files you write yourself.
  • Channel messages could be silently dropped when an unused channel slot matched first. Sends also match by name at the moment of transmission, so a message can no longer go out encrypted to the wrong channel.
  • The Store no longer jumps back to the top while you scroll it.
  • "Overwrite oldest" now says plainly that favourites are never overwritten (#178).
  • A companion app can opt into the full radio log over Bluetooth (#256).
  • More of the interface is translatable: the Discovered/Contacts sort menus and the traffic panel (#257).

Community

Pager keyboard shortcuts, portrait layout fixes, a theme-matching Wi-Fi icon and Heltec UI tweaks — @oumike, #263.


Boards: Heltec V4 TFT · Heltec V4-R8 TFT · LilyGo T-Deck · T-Lora Pager (LR1121 / SX1262) · ThinkNode M9 · RAK TAP v2 · Attaky Mesh Series · LilyGo T-Display P4 (AMOLED + LCD).

Use -merged.bin for a fresh install at offset 0x0; the plain .bin is the app-only image for OTA and the Launcher.

Don't miss a new wadamesh release

NewReleases is sending notifications on new releases.