v2.1.2 adds the L2TP and PPTP client packages to the release's package repository, for ISPs that give Internet access only inside such a tunnel (#56). Nothing else changes: the same base as v2.1.1 (kuncy7's c3po-tag-8021q at c36db6321c) and the same 200 packages in the image. If you do not need L2TP or PPTP, there is no reason to update from v2.1.1.
- L2TP and PPTP clients (#56).
apk add xl2tpd(L2TP) orapk add ppp-mod-pptp(PPTP), restart the network, and add an interface with that protocol: see L2TP and PPTP, which also covers the WAN metric a tunnel default route needs. The kernel modules could not be added to v2.1.1's repository: a module has to match the kernel of its image, and building these changes that kernel's configuration. Tunnel traffic is not offloaded by NSS: about 40-57 Mbit/s for one connection on the bench. - PPTP needs one line of
/etc/ppp/options.pptpchanged. OpenWrt's file uses an option the current pppd no longer has (mppe required,...), so the interface fails withunrecognized option 'mppe'. The guide has the one-line fix.
Updating from v2.x: boot the v2.1.2 RAM installer and run sysupgrade from there, keeping settings (updating without UART). From stock firmware, python3 install.py from xiaomi-openwrt-install installs this release.
Tested on the bench, installed on NAND as an update with settings kept, over the RAM installer's Wi-Fi:
- L2TP and PPTP sessions to test servers, with routed traffic through each; both came back by themselves after a reboot. No warning or crash.
- The kernel's code is byte-identical to v2.1.1's, and the 49 kept configuration files came through unchanged.
Known issues: all. Each release has its own package repository: after updating, apk installs kernel modules from the v2.1.2 one, which the image lists.
Checksums are in sha256sums.txt; packages are signed with this port's v2 key, which the image trusts.